CA3280A

® CA3280, CA3280A Data Sheet May 2002 FN1174.6 Dual, 9MHz, Operational Transconductance Amplifier (OTA) The CA3280 and CA3280A types consist of two variable operational amplifiers that are designed to substantially reduce the initial input offset voltage and the offset voltage variation with respect to changes in programming current. This design results in reduced “AGC thump,” an objectionable characteristic of many AGC systems. Interdigitation, or crosscoupling, of critical portions of the circuit reduces the amplifier dependence upon thermal and processing variables. The CA3280 has all the generic characteristics of an operational voltage amplifier except that the forward transfer characteristics is best described by transconductance rather than voltage gain, and the output is current, not voltage. The magnitude of the output current is equal to the product of transconductance and the input voltage. This type of operational transconductance amplifier was first introduced in 1969, and it has since gained wide acceptance as a gateable, gain controlled building block for instrumentation and audio applications, such as linearization of transducer outputs, standardization of widely changing signals for data processing, multiplexing, instrumentation amplifiers operating from the nanopower range to high current and high speed comparators. For additional application information on this device and on OTAs in general, please refer to Application Notes: AN6818, AN6668, and AN6077. Features • Low Initial Input Offset Voltage: 500µV (Max) (CA3280A) • Low Offset Voltage Change vs IABC: