CD4013

CD4013BMS December 1992 CMOS Dual ‘D’-Type Flip-Flop Pinout Q1 1 14 VDD 13 Q2 12 Q2 11 CLOCK 2 10 RESET 2 9 D2 8 SET 2 Features • High-Voltage Type (20V Rating) • Set-Reset Capability • Static Flip-Flop Operation - Retains State Indefinitely With Clock Level Either “High” Or “Low” • Medium-Speed Operation - 16 MHz (typ.) Clock Toggle Rate at 10V • Standardized Symmetrical Output Characteristics • 100% Tested for Quiescent Current at 20V • Maximum Input Current of 1µA at 18V Over Full Package Temperature Range; 100nA at 18V and +25oC • Noise Margin (Over Full Package Temperature Range): - 1V at VDD = 5V - 2V at VDD = 10V - 2.5V at VDD = 15V • 5V, 10V and 15V Parametric Ratings • Meets All Requirements of JEDEC Tentative Standard No. 13B, “Standard Specifications for Description of ‘B’ Series CMOS Devices” Q1 2 CLOCK 1 3 RESET 1 4 D1 5 SET 1 6 VSS 7 Functional Diagram VDD 14 6 5 3 4 8 9 11 F/F2 12 13 F/F1 2 1 SET 1 D1 CLOCK 1 Q1 Q1 Applications RESET 1 • Registers • Counters SET 2 D2 Q2 Q2 • Control Circuits CLOCK 2 Description CD4013BMS consists of two identical, independent data type flip-flops. Each flip-flop has independent data, set, reset, and clock inputs and Q and Q outputs. These devices can be used for shift register applications, and, by connecting Q output to the data input, for counter and toggle applications. The logic level present at the D input is transferred to the Q output during the positive going transition of the clock pulse. Setting or resetting is independent of the clock and is accomplished by a high level on the set or reset line, respectively. The CD4013BMS is supplied in these 14 lead outline packages: Braze Seal DIP Frit Seal DIP Ceramic Flatpack H4Q H1B H3W RESET 2 10 7 VSS CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. 1-888-INTERSIL or 321-724-7143 | Copyright © Intersil Corporation 1999 File Number 3080 7-62 Specifications CD4013BMS Absolute Maximum Ratings DC Supply Voltage Range, (VDD) . . . . . . . . . . . . . . . -0.5V to +20V (Voltage Referenced to VSS Terminals) Input Voltage Range, All Inputs . . . . . . . . . . . . .-0.5V to VDD +0.5V DC Input Current, Any One Input. . . . . . . . . . . . . . . . . . . . . . . . .±10mA Operating Temperature Range . . . . . . . . . . . . . . . . -55oC to +125oC Package Types D, F, K, H Storage Temperature Range (TSTG) . . . . . . . . . . . -65oC to +150oC Lead Temperature (During Soldering) . . . . . . . . . . . . . . . . . +265oC At Distance 1/16 ± 1/32 Inch (1.59mm ± 0.79mm) from case for 10s Maximum Reliability Information Thermal Resistance . . . . . . . . . . . . . . . . θja θjc Ceramic DIP and FRIT Package . . . . . 80oC/W 20oC/W Flatpack Package . . . . . . . . . . . . . . . . 70oC/W 20oC/W o Maximum Package Power Dissipation (PD) at +125 C For TA = -55oC to +100oC (Package Type D, F, K) . . . . . . 500mW For TA = +100oC to +125oC (Package Type D, F, K) . . . . . . Derate Linearity at 12mW/oC to 200mW Device Dissipation per Output Transistor . . . . . . . . . . . . . . . 100mW For TA = Full Package Temperature Range (All Package Types) Junction Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +175oC TABLE 1. DC ELECTRICAL PERFORMANCE CHARACTERISTICS GROUP A SUBGROUPS 1 2 VDD = 18V, VIN = VDD or GND Input Leakage Current IIL VIN = VDD or GND VDD = 20 3 1 2 VDD = 18V Input Leakage Current IIH VIN = VDD or GND VDD = 20 3 1 2 VDD = 18V Output Voltage Output Voltage Output Current (Sink) Output Current (Sink) Output Current (Sink) Output Current (Source) Output Current (Source) Output Current (Source) Output Current (Source) N Threshold Voltage P Threshold Voltage Functional VOL15 VOH15 IOL5 IOL10 IOL15 IOH5A IOH5B IOH10 IOH15 VNTH VPTH F VDD = 15V, No Load VDD = 15V, No Load (Note 3) VDD = 5V, VOUT = 0.4V VDD = 10V, VOUT = 0.5V VDD = 15V, VOUT = 1.5V VDD = 5V, VOUT = 4.6V VDD = 5V, VOUT = 2.5V VDD = 10V, VOUT = 9.5V VDD = 15V, VOUT = 13.5V VDD = 10V, ISS = -10µA VSS = 0V, IDD = 10µA VDD = 2.8V, VIN = VDD or GND VDD = 20V, VIN = VDD or GND VDD = 18V, VIN = VDD or GND VDD = 3V, VIN = VDD or GND Input Voltage Low (Note 2) Input Voltage High (Note 2) Input Voltage Low (Note 2) Input Voltage High (Note 2) VIL VIH VIL VIH VDD = 5V, VOH > 4.5V, VOL < 0.5V VDD = 5V, VOH > 4.5V, VOL < 0.5V VDD = 15V, VOH > 13.5V, VOL < 1.5V VDD = 15V, VOH > 13.5V, VOL < 1.5V 3 1, 2, 3 1, 2, 3 1 1 1 1 1 1 1 1 1 7 7 8A 8B 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 +25oC, +25oC, LIMITS TEMPERATURE +25 C +125 oC o PARAMETER Supply Current SYMBOL IDD CONDITIONS (NOTE 1) VDD = 20V, VIN = VDD or GND MIN -100 -1000 -100 - MAX 2 200 2 100 1000 100 50 -0.53 -1.8 -1.4 -3.5 -0.7 2.8 UNITS µA µA µA nA nA nA nA nA nA mV V mA mA mA mA mA mA mA V V V -55o C +25 C +125oC -55oC +25oC +125oC -55oC +125oC, +125oC, +25oC +25oC +25oC +25oC +25oC +25oC +25oC +25oC +25oC +25oC +25oC +125oC -55oC +25oC, +125oC, -55oC +25oC, +125oC, -55oC +25oC, +125oC, -55oC +25oC, +125oC, -55oC -55oC -55oC o 14.95 0.53 1.4 3.5 -2.8 0.7 VOH > VOL < VDD/2 VDD/2 3.5 11 1.5 4 - V V V V NOTES: 1. All voltages referenced to device GND, 100% testing being implemented. 2. Go/No Go test with limits applied to inputs 3. For accuracy, voltage is measured differentially to VDD. Limit is 0.050V max. 7-63 Specifications CD4013BMS TABLE 2. AC ELECTRICAL PERFORMANCE CHARACTERISTICS GROUP A SUBGROUPS TEMPERATURE 9 10, 11 VDD = 5V, VIN = VDD or GND 9 10, 11 TPLH2 VDD = 5V, VIN = VDD or GND 9 10, 11 TTHL TTLH FCL VDD = 5V, VIN = VDD or GND 9 10, 11 VDD = 5V, VIN = VDD or GND 9 10, 11 +25oC +125oC, -55oC LIMITS MIN 3.5 3.5/1.35 MAX 300 405 400 540 300 405 200 270 UNITS ns ns ns ns ns ns ns ns MHz MHz PARAMETER Propagation Delay Clock to Q, Q Propagation Delay Set to Q, Reset to Q Propagation Delay Set to Q, Reset to Q Transition Time Clock to Q, Q Maximum Clock Input Frequency NOTES: SYMBOL TPHL1 TPLH1 TPHL2 CONDITIONS (NOTE 1, 2) VDD = 5V, VIN = VDD or GND +25oC +125oC, -55oC +25oC +125oC, -55oC +25oC +125oC, -55oC +25oC +125oC, -55oC 1. VDD = 5V, CL = 50pF, RL = 200K 2. -55oC and +125oC limits guaranteed, 100% testing being implemented. TABLE 3. ELECTRICAL PERFORMANCE CHARACTERISTICS LIMITS PARAMETER Supply Current SYMBOL IDD CONDITIONS VDD = 5V, VIN = VDD or GND NOTES 1, 2 TEMPERATURE -55oC, +25oC MIN 4.95 9.95 0.36 0.64 0.9 1.6 2.4 4.2 MAX 1.0 30 2.0 60 2.0 120 50 50 -0.36 -0.64 -1.15 -1.6 -0.9 -4.2 UNITS µA µA µA µA µA µA mV mV V V mA mA mA mA mA mA mA mA mA mA mA mA +125oC VDD = 10V, VIN = VDD or GND 1, 2 -55oC, +25oC +125oC VDD = 15V, VIN = VDD or GND 1, 2 -55oC, +25oC +125oC Output Voltage Output Voltage Output Voltage Output Voltage Output Current (Sink) VOL VOL VOH VOH IOL5 VDD = 5V, No Load VDD = 10V, No Load VDD = 5V, No Load VDD = 10V, No Load VDD = 5V, VOUT = 0.4V 1, 2 1, 2 1, 2 1, 2 1, 2 +25oC, +125oC, -55oC +25oC, +125oC, -55oC +25oC, +125oC, -55oC +25oC, +125oC, -55oC +125oC -55oC Output Current (Sink) IOL10 VDD = 10V, VOUT = 0.5V 1, 2 +125oC -55oC Output Current (Sink) IOL15 VDD = 15V, VOUT = 1.5V 1, 2 +125oC -55oC Output Current (Source) IOH5A VDD = 5V, VOUT = 4.6V 1, 2 +125oC -55oC Output Current (Source) IOH5B VDD = 5V, VOUT = 2.5V 1, 2 +125oC -55oC Output Current (Source) IOH10 VDD = 10V, VOUT = 9.5V 1, 2 +125oC -55oC 7-64 Specifications CD4013BMS TABLE 3. ELECTRICAL PERFORMANCE CHARACTERISTICS (Continued) LIMITS PARAMETER Output Current (Source) SYMBOL IOH15 CONDITIONS VDD =15V, VOUT = 13.5V NOTES 1, 2 TEMPERATURE +125oC -55oC Input Voltage Low Input Voltage High Propagation Delay Clock to Q, Q Propagation Delay Set to Q Reset to Q Propagation Delay Set to Q Reset to Q Transition Time Clock to Q, Q Maximum Clock Input Frequency Minimum Data Setup Time VIL VIH TPHL1 TPLH1 TPHL2 VDD = 10V, VOH > 9V, VOL < 1V VDD = 10V, VOH > 9V, VOL < 1V VDD = 10V VDD = 15V VDD = 10V VDD = 15V TPLH2 VDD = 10V VDD = 15V TTHL TTLH FCL VDD = 10V VDD = 15V VDD = 10V VDD = 15V TS VDD = 5V VDD = 10V VDD = 15V Minimum Clock Pulse Width TW VDD = 5V VDD = 10V VDD = 15V Minimum Set or Reset Pulse Width TW VDD = 5V VDD = 10V VDD = 15V Input Capacitance NOTES: 1. All voltages referenced to device GND. 2. The parameters listed on Table 3 are controlled via design or process and are not directly tested. These parameters are characterized on initial design release and upon design changes which would affect these characteristics. 3. CL = 50pF, RL = 200K, Input TR, TF < 20ns. TABLE 4. POST IRRADIATION ELECTRICAL PERFORMANCE CHARACTERISTICS LIMITS PARAMETER Supply Current N Threshold Voltage SYMBOL IDD VNTH CONDITIONS VDD = 20V, VIN = VDD or GND VDD = 10V, ISS = -10µA NOTES 1, 4 1, 4 TEMPERATURE +25oC +25oC MIN -2.8 MAX 7.5 -0.2 UNITS µA V CIN Any Input 1, 2 1, 2 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 2, 3 2, 3 2, 3 1, 2 +25oC, +125oC, -55oC +25oC, +125oC, -55oC +25oC +25oC +25oC +25 C +25oC +25oC +25oC +25oC +25oC +25oC +25oC +25oC +25oC +25oC +25oC +25oC +25oC +25oC +25oC +25oC o MIN +7 8 12 - MAX -2.4 -4.2 3 130 90 170 120 130 90 100 80 40 20 15 140 60 40 180 80 50 7.5 UNITS mA mA V V ns ns ns ns ns ns ns ns MHz MHz ns ns ns ns ns ns ns ns ns pF 7-65 Specifications CD4013BMS TABLE 4. POST IRRADIATION ELECTRICAL PERFORMANCE CHARACTERISTICS LIMITS PARAMETER N Threshold Voltage Delta P Threshold Voltage P Threshold Voltage Delta Functional SYMBOL ∆VNTH VPTH ∆VPTH F CONDITIONS VDD = 10V, ISS = -10µA VSS = 0V, IDD = 10µA VSS = 0V, IDD = 10µA VDD = 18V, VIN = VDD or GND VDD = 3V, VIN = VDD or GND Propagation Delay Time TPHL TPLH VDD = 5V 1, 2, 3, 4 +25oC NOTES 1, 4 1, 4 1, 4 1 TEMPERATURE +25oC +25oC +25oC +25oC MIN 0.2 VOH > VDD/2 MAX ±1 2.8 ±1 VOL < VDD/2 1.35 x +25oC Limit UNITS V V V V ns NOTES: 1. All voltages referenced to device GND. 2. CL = 50pF, RL = 200K, Input TR, TF < 20ns. 3. See Table 2 for +25oC limit. 4. Read and Record TABLE 5. BURN-IN AND LIFE TEST DELTA PARAMETERS +25OC PARAMETER Supply Current - MSI-1 Output Current (Sink) Output Current (Source) SYMBOL IDD IOL5 IOH5A ± 0.2µA ± 20% x Pre-Test Reading ± 20% x Pre-Test Reading DELTA LIMIT TABLE 6. APPLICABLE SUBGROUPS CONFORMANCE GROUP Initial Test (Pre Burn-In) Interim Test 1 (Post Burn-In) Interim Test 2 (Post Burn-In) PDA (Note 1) Interim Test 3 (Post Burn-In) PDA (Note 1) Final Test Group A Group B Subgroup B-5 Subgroup B-6 Group D MIL-STD-883 METHOD 100% 5004 100% 5004 100% 5004 100% 5004 100% 5004 100% 5004 100% 5004 Sample 5005 Sample 5005 Sample 5005 Sample 5005 GROUP A SUBGROUPS 1, 7, 9 1, 7, 9 1, 7, 9 1, 7, 9, Deltas 1, 7, 9 1, 7, 9, Deltas 2, 3, 8A, 8B, 10, 11 1, 2, 3, 7, 8A, 8B, 9, 10, 11 1, 2, 3, 7, 8A, 8B, 9, 10, 11, Deltas 1, 7, 9 1, 2, 3, 8A, 8B, 9 Subgroups 1, 2 3 Subgroups 1, 2, 3, 9, 10, 11 IDD, IOL5, IOH5A READ AND RECORD IDD, IOL5, IOH5A IDD, IOL5, IOH5A IDD, IOL5, IOH5A NOTE: 1. 5% Parameteric, 3% Functional; Cumulative for Static 1 and 2. TABLE 7. TOTAL DOSE IRRADIATION MIL-STD-883 METHOD 5005 TEST PRE-IRRAD 1, 7, 9 POST-IRRAD Table 4 READ AND RECORD PRE-IRRAD 1, 9 POST-IRRAD Table 4 CONFORMANCE GROUPS Group E Subgroup 2 7-66 Specifications CD4013BMS TABLE 8. BURN-IN AND IRRADIATION TEST CONNECTIONS OSCILLATOR FUNCTION Static Burn-In 1 (Note 1) Static Burn-In 2 (Note 1) Dynamic BurnIn (Note 1) Irradiation (Note 2) NOTE: 1. Each pin except VDD and GND will have a series resistor of 10K ± 5%, VDD = 18V ± 0.5V 2. Each pin except VDD and GND will have a series resistor of 47K ± 5%; Group E, Subgroup 2, sample size is 4 dice/wafer, 0 failures, VDD = 10V ± 0.5V OPEN 1, 2, 12, 13 1, 2, 12, 13 1, 2, 12, 13 GROUND 3-11 7 4, 6-8, 10 7 VDD 14 3-6, 8-11, 14 14 3-6, 8-11, 14 1, 2, 12, 13 3, 11 5, 9 9V ± -0.5V 50kHz 25kHz Logic Diagram *4(10) RESET CL p TG n CL CL p TG n CL MASTER SECTION CL p TG n CL CL p TG n CL Q 1(13) CL CL BUFFERED OUTPUTS Q 2(12) SLAVE SECTION *5(9) DATA *6(8) SET *3(11) CL 14 7 VDD VSS * All inputs are protected by CMOS protection network FIGURE 1. ONE OF TWO IDENTICAL FLIP-FLOPS TRUTH TABLE CL* D 0 1 X X X X X X X R 0 0 0 1 0 1 S 0 0 0 0 1 1 Q 0 1 Q 0 1 1 Q 1 0 Q 1 0 1 No Change Logic 0 = Low Logic 1 = High * = Level change X = Don’t care N(N) = FF1/FF2 terminal assignments 7-67 CD4013BMS Typical Performance Characteristics OUTPUT LOW (SINK) CURRENT (IOL) (mA) OUTPUT LOW (SINK) CURRENT (IOL) (mA) AMBIENT TEMPERATURE (TA) = +25oC AMBIENT TEMPERATURE (TA) = +25oC 30 25 20 15 10 5 GATE-TO-SOURCE VOLTAGE (VGS) = 15V 15.0 GATE-TO-SOURCE VOLTAGE (VGS) = 15V 12.5 10.0 7.5 5.0 2.5 10V 10V 5V 0 5 10 15 5V 0 5 10 15 DRAIN-TO-SOURCE VOLTAGE (VDS) (V) DRAIN-TO-SOURCE VOLTAGE (VDS) (V) FIGURE 2. TYPICAL OUTPUT LOW (SINK) CURRENT CHARACTERISTICS DRAIN-TO-SOURCE VOLTAGE (VDS) (V) -15 -10 -5 AMBIENT TEMPERATURE (TA) = +25oC GATE-TO-SOURCE VOLTAGE (VGS) = -5V FIGURE 3. MINIMUM OUTPUT LOW (SINK) CURRENT CHARACTERISTICS DRAIN-TO-SOURCE VOLTAGE (VDS) (V) -15 -10 -5 OUTPUT HIGH (SOURCE) CURRENT (IOH) (mA) AMBIENT TEMPERATURE (TA) = +25oC GATE-TO-SOURCE VOLTAGE (VGS) = -5V -5 0 0 -5 -10 -15 0 0 OUTPUT HIGH (SOURCE) CURRENT (IOH) (mA) -10V -20 -25 -10V -10 -15V -30 -15V -15 FIGURE 4. TYPICAL OUTPUT HIGH (SOURCE) CURRENT CHARACTERISTICS PROPAGATION DELAY TIME (tPHL, tPLH) (ns) AMBIENT TEMPERATURE (TA) = +25oC FIGURE 5. MINIMUM OUTPUT HIGH (SOURCE) CURRENT CHARACTERISTICS PROPAGATION DELAY TIME (tPHL, tPLH) (ns) AMBIENT TEMPERATURE (TA) = +25oC 250 250 200 SUPPLY VOLTAGE (VDD) = 5V 200 SUPPLY VOLTAGE (VDD) = 5V 150 150 10V 100 15V 50 100 10V 15V 50 0 20 40 60 80 100 LOAD CAPACITANCE (CL) (pF) 0 20 40 60 80 100 LOAD CAPACITANCE (CL) (pF) FIGURE 6. TYPICAL PROPAGATION DELAY TIME vs LOAD CAPACITANCE (CLOCK OR SET TO Q, CLOCK OR RESET TO Q) FIGURE 7. TYPICAL PROPAGATION DELAY TIME vs LOAD CAPACITANCE (SET TO Q OR RESET TO Q) 7-68 CD4013BMS Typical Performance Characteristics AMBIENT TEMPERATURE (TA) = +25oC tr, tf = 5ns CL = 50pF 30 25 20 15 10 5 (Continued) 104 DISSIPATION PER DEVICE (PD) (µW) 8 6 4 2 CLOCK FREQUENCY (fCL) (MHz) 103 SUPPLY VOLTAGE (VDD) = 15V 10V 10V 5V CL = 50pF CL = 15pF AMBIENT TEMPERATURE (TA) = +25oC INPUT tr = tf = 20ns 8 6 4 2 102 8 6 4 2 10 8 6 4 2 0 5 10 15 SUPPLY VOLTAGE (VDD) (V) 20 1 102 2 4 68 103 2 104 105 106 INPUT FREQUENCY (ft) (HZ) 4 68 2 4 68 2 4 68 2 4 68 FIGURE 8. TYPICAL MAXIMUM CLOCK FREQUENCY vs SUPPLY VOLTAGE FIGURE 9. TYPICAL POWER DISSIPATION vs FREQUENCY Chip Dimensions and Pad Layout CO N CT TA YO UR LO L CA S E AL S O FF IC E FO R Dimension in parenthesis are in millimeters and are derived from the basic inch dimensions as indicated. Grid graduations are in mils (10-3 inch). METALLIZATION: Thickness: 11kÅ − 14kÅ, PASSIVATION: BOND PADS: 10.4kÅ - 15.6kÅ, Silane AL. 0.004 inches X 0.004 inches MIN 0.0198 inches - 0.0218 inches DIE THICKNESS: 7-69 CD4013BMS All Intersil semiconductor products are manufactured, assembled and tested under ISO9000 quality systems certification. Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design and/or specifications at any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries. For information regarding Intersil Corporation and its products, see web site http://www.intersil.com Sales Office Headquarters NORTH AMERICA Intersil Corporation P. O. Box 883, Mail Stop 53-204 Melbourne, FL 32902 TEL: (321) 724-7000 FAX: (321) 724-7240 EUROPE Intersil SA Mercure Center 100, Rue de la Fusee 1130 Brussels, Belgium TEL: (32) 2.724.2111 FAX: (32) 2.724.22.05 ASIA Intersil (Taiwan) Ltd. Taiwan Limited 7F-6, No. 101 Fu Hsing North Road Taipei, Taiwan Republic of China TEL: (886) 2 2716 9310 FAX: (886) 2 2715 3029 File Number 70