HS9S-117RH-Q

® HS-117RH Data Sheet October 2003 FN4560.7 Radiation Hardened Adjustable Positive Voltage Regulator The Radiation Hardened HS-117RH is an adjustable positive voltage linear regulator capable of operating with input voltages up to 40VDC. The output voltage is adjustable from 1.2V to 37V with two external resistors. The device is capable of sourcing from 5mA to 1.25APEAK (0.5 APEAK for the TO-39 package). Protection is provided by the on-chip thermal shutdown and output current limiting circuitry. The Intersil HS-117RH has advantages over other industry standard types, in that circuitry is incorporated to minimize the effects of radiation and temperature on device stability. Constructed with the Intersil dielectrically isolated Rad Hard Silicon Gate (RSG) process, the HS-117RH is immune to single event latch-up and has been specifically designed to provide highly reliable performance in harsh radiation environments. Specifications for Rad Hard QML devices are controlled by the Defense Supply Center in Columbus (DSCC). The SMD numbers listed here must be used when ordering. Features • Electrically Screened to DSSC SMD # 5962-99547 • QML Qualified per MIL-PRF-38535 Requirements • Radiation Environment - 300 krad (Si) (Max) - Latch-up Immune • Superior Temperature Stability • Overcurrent and Overtemperature Protection Applications • Adjustable Linear Voltage Regulators • Adjustable Linear Current Regulators Ordering Information ORDERING NUMBER 5962F9954701VUC 5962F9954701QUC 5962F9954701VXC 5962F9954701QXC 5962F9954701VYC INTERNAL MKT. NUMBER HS2-117RH-Q HS2-117RH-8 HS9S-117RH-Q HS9S-117RH-8 HSYE-117RH-Q HSYE-117RH-8 HS2-117RH/Proto HS9S-117RH/Proto HSYE-117RH/Proto TEMP. RANGE (oC) -55 to 125 -55 to 125 -55 to 125 -55 to 125 -55 to 125 -55 to 125 -55 to 125 -55 to 125 -55 to 125 Detailed electrical specifications for the HS-117RH are contained in SMD 5962-99547. A “hot-link” is provided on our website for downloading. Pinouts HS2-117RH (TO-39 CAN) BOTTOM VIEW ADJUST 2 5962F9954701QYC HS2-117RH/Proto HS9S-117RH/Proto HSYE-117RH/Proto IN 1 3 OUT HSYE-117RH (SMD.5 CLCC) BOTTOM VIEW 2 3 1 - ADJUST 2 - IN 3 - OUT 1 HS9S-117RH (TO-257AA FLANGE MOUNT) TOP VIEW IN OUT ADJUST 3 2 1 NOTE: No current JEDEC outline for the SMD.5 package. Refer to SMD for package dimensions. The TO-257 is a totally isolated metal package. 1 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. 1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a registered trademark of Intersil Americas Inc. Copyright © Intersil Americas Inc. 2003. All Rights Reserved. All other trademarks mentioned are the property of their respective owners. HS-117RH Die Characteristics DIE DIMENSIONS 2616µm x 2794µm (103 mils x 110 mils) 483µm ±25.4µm (19 mils ±1 mil) INTERFACE MATERIALS Glassivation Type: Silox (SiO2) Thickness: 8.0kÅ ±1.0kÅ Top Metallization Type: AlSiCu Thickness: 16.0kÅ ±2kÅ Substrate Radiation Hardened Silicon Gate, Dielectric Isolation Backside Finish Gold ASSEMBLY RELATED INFORMATION Substrate Potential Unbiased (DI) ADDITIONAL INFORMATION Worst Case Current Density