ISL28417FRZ

40V Precision Low Power Operational Amplifiers ISL28117, ISL28217, ISL28417 The ISL28117, ISL28217 and ISL28417 are a family of very high precision amplifiers featuring low noise vs power consumption, low offset voltage, low IBIAS current and low temperature drift making them the ideal choice for applications requiring both high DC accuracy and AC performance. The combination of precision, low noise, and small footprint provides the user with outstanding value and flexibility relative to similar competitive parts. Applications for these amplifiers include precision active filters, medical and analytical instrumentation, precision power supply controls, and industrial controls. The ISL28117 single and ISL28217 dual are offered in an 8 Ld SOIC, MSOP and TDFN packages. The ISL28417 is offered in 14 Ld SOIC, 14 Ld TSSOP and 16 Ld QFN packages. All devices are offered in standard pin configurations and operate over the extended temperature range from -40°C to +125°C. Features • Low Input Offset . . . . . . . . . . . . . . . . . . . . . . . . . . . ±50µV, Max. • Superb Offset TC . . . . . . . . . . . . . . . . . . . . . . . 0.6µV/°C, Max. • Input Bias Current . . . . . . . . . . . . . . . . . . . . . . . . . . ±1nA, Max. • Input Bias Current TC. . . . . . . . . . . . . . . . . . . . .±5pA/°C, Max. • Low Current Consumption . . . . . . . . . . . . . . . . . . . . . . . 440µA • Voltage Noise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8nV/Hz • Wide Supply Range . . . . . . . . . . . . . . . . . . . . . . . . .4.5V to 40V • Operating Temperature Range. . . . . . . . . . .-40°C to +125°C • Small Package Offerings in Single, Dual and Quad • Pb-Free (RoHS Compliant) Related Literature • See AN1508 “ISL281X7SOICEVAL1Z Evaluation Board User’s Guide” • See AN1509 “ISL282X7SOICEVAL2Z Evaluation Board User’s Guide” Applications • Precision Instruments • Medical Instrumentation • Spectral Analysis Equipment • Active Filter Blocks • Thermocouples and RTD Reference Buffers • Data Acquisition • Power Supply Control 18 16 NUMBER OF AMPLIFIERS C1 8.2nF VS = ± 15V 14 12 10 8 6 4 2 V+ R1 1.84k VIN R2 + 4.93k 3.3nF OUTPUT C2 V- 0 -0.45 -0.30 -0.15 0 0.15 0.30 0.45 SALLEN-KEY LOW PASS FILTER (10kHz) VOSTC (µV/°C) FIGURE 1. TYPICAL APPLICATION FIGURE 2. VOS T EMPERATURE COEFFICIENT (VOSTC) October 13, 2011 FN6632.8 1 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. 1-888-INTERSIL or 1-888-468-3774 | Copyright Intersil Americas Inc. 2009-2011. All Rights Reserved Intersil (and design) is a trademark owned by Intersil Corporation or one of its subsidiaries. All other trademarks mentioned are the property of their respective owners. ISL28117, ISL28217, ISL28417 Ordering Information PART NUMBER (Notes 1, 2, 3) ISL28117FBBZ ISL28117FBZ ISL28117FUBZ ISL28117FUZ ISL28117FRTBZ ISL28117FRTZ ISL28217FBBZ ISL28217FBZ Coming Soon ISL28217FUBZ ISL28217FUZ ISL28217FRTBZ ISL28217FRTZ ISL28417FBBZ ISL28417FBZ Coming Soon ISL28417FVZ Coming Soon ISL28417FRZ ISL28117SOICEVAL1Z ISL28217SOICEVAL2Z PART MARKING 28117 FBZ 28117 FBZ -C 8117Z 8117Z -C 8117 -C 8117 28217 FBZ 28217 FBZ -C 8217Z 8217Z -C 8217 -C 8217 28417 FBZ 28417 FBZ -C 28417 FVZ 28 417FRZ Evaluation Board Evaluation Board VOS (MAX) (µV) 50 (B Grade) 100 (C Grade) 70 (B Grade) 150 (C Grade) 75 (B Grade) 150 (C Grade) 50 (B Grade) 100 (C Grade) TBD (B Grade) 150 (C Grade) 70 (B Grade) 150 (C Grade) 120 (B Grade) 200 (C Grade) -40 to +125 -40 to +125 PACKAGE (Pb-Free) 8 Ld SOIC 8 Ld SOIC 8 Ld MSOP 8 Ld MSOP 8 Ld TDFN 8 Ld TDFN 8 Ld SOIC 8 Ld SOIC 8 Ld MSOP 8 Ld MSOP 8 Ld TDFN 8 Ld TDFN 14 Ld SOIC 14 Ld SOIC 14 Ld TSSOP 16 Ld QFN M8.15E M8.15E M8.118 M8.118 L8.3x3A L8.3x3A M8.15E M8.15E M8.118 M8.118 L8.3x3A L8.3x3A MDP0027 MDP0027 M14.173 L16.4x4 PKG. DWG. # NOTES: 1. Add “-T*” suffix for tape and reel. Please refer to TB347 for details on reel specifications. 2. These Intersil Pb-free plastic packaged products employ special Pb-free material sets, molding compounds/die attach materials, and 100% matte tin plate plus anneal (e3 termination finish, which is RoHS compliant and compatible with both SnPb and Pb-free soldering operations). Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020. 3. For Moisture Sensitivity Level (MSL), please see device information page for ISL28117, ISL28217, ISL28417. For more information on MSL please see techbrief TB363. 2 October 13, 2011 FN6632.8 ISL28117, ISL28217, ISL28417 Pin Configurations ISL28117 (8 LD SOIC, MSOP) TOP VIEW NC -IN +IN V1 2 3 4 -+ 8 7 6 5 NC V+ VOUT NC NC 1 -IN 2 +IN 3 V- 4 -+ ISL28117 (8 LD TDFN) TOP VIEW 8 NC 7 V+ 6 VOUT 5 NC ISL28217 (8 LD SOIC, MSOP) TOP VIEW VOUT_A -IN_A +IN_A V1 2 3 4 -+ +8 V+ 7 VOUT_B 6 -IN_B 5 +IN_B VOUT_A 1 -IN_A 2 +IN_A 3 V- 4 ISL28217 (8 LD TDFN) TOP VIEW 8 V+ -+ +7 VOUT_B 6 -IN_B 5 +IN_B ISL28417 (14 LD SOIC, TSSOP) TOP VIEW VOUT_A 1 -IN_A 2 +IN_A 3 V+ 4 +IN_B 5 -IN_B 6 VOUT_B 7 -+ B +C A -+ D +14 VOUT_D NC 13 -IN_D 12 +IN_D 11 V-IN_A +IN_A V+ 8 VOUT_C +IN_B 4 1 A ISL28417 (16 LD QFN) TOP VIEW VOUT_A VOUT_D 14 16 15 13 12 -IN_D D +- 10 +IN_C 9 -IN_C NC 11 +IN_D 10 V +C 9 8 -IN_C -+ 5 -IN_B 2 3 -+ B +IN_C 6 VOUT_B 7 VOUT_C 3 October 13, 2011 FN6632.8 ISL28117, ISL28217, ISL28417 Pin Descriptions ISL28117 (8 LD SOIC, MSOP, TDFN) 3 4 2 7 6 1, 5, 8 PD ISL28217 (8 LD SOIC, MSOP, TDFN) 3 5 4 2 6 8 1 7 PD ISL28417 (14 LD SOIC, TSSOP) 3 5 10 12 11 2 6 9 13 4 1 7 8 14 ISL28417 (16 LD QFN) 2 4 9 11 10 1 5 8 12 3 15 6 7 14 13, 16 PD PIN NAME +IN +IN_A +IN_B +IN_C +IN_D V-IN -IN_A -IN_B -IN_C -IN_D V+ VOUT VOUT_A VOUT_B VOUT_C VOUT_D NC PD No internal connection Thermal Pad - TDFN and QFN packages only. Connect thermal pad to ground or most negative potential. V+ CAPACITIVELY COUPLED ESD CLAMP VCIRCUIT 3 EQUIVALENT CIRCUIT Circuit 1 DESCRIPTION Amplifier non-inverting input Circuit 3 Circuit 1 Negative power supply Amplifier inverting input Circuit 3 Circuit 2 Positive power supply Amplifier output V+ 500Ω IN500Ω IN+ V+ OUT VCIRCUIT 2 V- CIRCUIT 1 4 October 13, 2011 FN6632.8 ISL28117, ISL28217, ISL28417 Table of Contents Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Thermal Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Recommended Operating Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Electrical Specifications VS ± 15V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Electrical Specifications VS ± 5V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Typical Performance Curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Applications Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Functional Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Operating Voltage Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Input Performance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Input ESD Diode Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Output Current Limiting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Output Phase Reversal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Unused Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ISL28117, ISL28217 and ISL28417 SPICE Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . License Statement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 19 19 19 19 19 19 20 20 20 Characterization vs Simulation Results. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Revision History. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Package Outline Drawing (M8.15E). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Package Outline Drawing (M8.118). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Package Outline Drawing (L8.3x3A) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Package Outline Drawing (MDP0027). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Package Outline Drawing (M14.173). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Package Outline Drawing (L16.4x4) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 5 October 13, 2011 FN6632.8 ISL28117, ISL28217, ISL28417 Absolute Maximum Ratings Maximum Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....42V Maximum Differential Input Current . . . . . . . . . . . . . . . . . . . . . . . . . . 20mA Maximum Differential Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42V Min/Max Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . V- - 0.5V to V+ + 0.5V Max/Min Input current for Input Voltage >V+ or 130dB over-temperature. The minimum CMRR performance over the -40°C to +125°C temperature range is >120dB for power supply voltages from ±5V (10V) to ±15V (30V). The series resistors limit the high feed-through currents that can occur in pulse applications when the input dV/dT exceeds the 0.5V/µs slew rate of the amplifier. Without the series resistors, the input can forward-bias the anti-parallel diodes causing current to flow to the output resulting in severe distortion and possible diode failure. Figure 48 provides an example of distortion free large signal response using a 4VP-P input pulse with an input rise time of 1000) reduces input bias current while maintaining good frequency response, low input bias current and low noise. Input bias cancellation circuits provide additional bias current reduction to