ISL39300A-DAPDK-EVAL

® ISL39300A-DAPDK Data Sheet August 2003 FN8072 PRISM 54Mbps Wireless Local Area Network Access Point The Intersil ISL39300A WLAN Access Point is a complete wireless high speed Network Access Point (AP) utilizing the Intersil PRISM DuetteTM chip set in conjunction with the 3893 WiSOC BB/MAC. It conforms to the IEEE 802.11a, 802.11b and 802.11g protocols and therefore operates in both 2.4GHz ISM and 5GHz UNII frequency bands. It provides a complete PRISM reference design platform of hardware and software to system providers or integrators requiring wireless data communications capability. The Open Source Linux operating system offers a flexible and extensible development platform for making customized Access Points. The Developers Kit includes a WLAN Access Point reference design, configuration application, source code and documentation. It supports the IEEE 802.11a/b/g network specification for DSSS and OFDM signaling, providing 1-54Mbps data rates. Typical operating ranges are shown in Table 1. Features • Low cost Zero IF (ZIF) architecture • Fully compliant with the IEEE 802.11a, 802.11b and 802.11g WLAN standards • FCC Certified Under Part 15 to Operate in 2.4 and 5GHz bands • ETSI EN 300 328 parts 1 and 2, ETSI EN 301 489 parts 1 and 17 Certified • Supports all features required for Wi-FiTM Compliant Access Points • Support for 54, 48, 36, 24, 18, 12, 9, and 6Mbps OFDM, 11 and 5.5Mbps CCK and legacy 2 and 1 Mbps data rates • Supports Dual Rx/Tx Antenna Diversity • Provides 2 Wired ethernet (802.3) ports for WAN and LAN connection (10/100BaseT speeds) • Supports Power over Ethernet (802.3af according to Draft 3.1) on LAN port • miniPCI connector for PRISM GT™/Duette add-on card (Dual cell operation) • 6 LEDs of which one is user defined Ordering Information PART NUMBER DESCRIPTION CARDS/SET ISL39300A-DAPDK-EVAL Dual Band Access 1 AP/1 Duette PC Point Evaluation Kit Card ISL39300A-DAPDK-CD Reference Design NA • Open Source Linux operating system offering a flexible and extensible platform for feature development • Separate Web File Set for easy user-configuration and upgrading • Wizard for Automated IP Configuration • Enhanced Security via 802.1x, TKIP, and WPA • Wireless Distribution System (WDS) support for wireless repeater/bridge mode of operation • 802.11d regulatory domain selection supported • Inter Access Point Protocol (IAPP) according to latest draft 802.11f standard • 802.1d support (Spanning tree protocol) • Multi-homed IP address selection via static IP, DHCP, or Auto IP • Internet connection establishment via static IP, DHCP, PPTP, or PPPoE • MAC cloning Packaging Sample plastic enclosure. • NAT/NAPT support • VPN pass-through support (PPTP & IPSec) • DHCP server • SNMPv2 support • HTTP server CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. 1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a registered trademark of Intersil Americas Inc. Copyright © Intersil Americas Inc. 2003. All Rights Reserved. All other trademarks mentioned are the property of their respective owners. PRISM® is a registered trademark of Intersil Americas Inc. PRISM Duette, PRISM GT, and PRISM and design are trademarks of Intersil Americas Inc. 1