ZL6105-1CH-DEMO1Z

USER’S MANUAL ZL6105-1CH-DEMO1Z UG014 Rev 0.00 December 18, 2014 Demonstration Board User Guide Introduction Key Features The ZL6105 is an innovative power conversion and management IC that combines integrated MOSFET drivers with key power and fault management functions in a small package, resulting in a flexible and integrated solution. The ZL6105-1CH-DEMO1Z platform allows quick evaluation of the highly configurable ZL6105’s performance and features in either stand-alone mode or via the SMBus™ interface using Intersil’s PowerNavigator™ GUI software. • Optimized for small circuit footprint Specifications • ZL6105, Datasheet • Onboard enable switch • Power-good indicator • SMBus control interface • Interconnectivity with other Intersil demo boards References • AN2010, “Thermal and Layout Guidelines for Digital-DCTM Products” This board has been configured and optimized for the following range of operating conditions: • AN2035, “Compensation Using CompZLTM” • VIN = 5.5V to 14V • AN1779, “Configuring Current Sharing on the ZL6105 and ZL8101” • VOUT = 0.6V to 3.6V • IMAX = 40A • TB389, “PCB Land Pattern and Surface Mount Guidelines for QFN Packages” • fSW = 300kHz to 1333kHz • Peak efficiency: >90% at 50% load Ordering Information • Output ripple: