U20-48S12

U20 SERIES DC/DC MODULES Model Number U20-12S5 U20-12S12 U20-12S15 U20-12D12 U20-12D15 U20-12D5 U20-12S3.3 U20-48S5 U20-48S12 U20-48S15 U20-48D12 U20-48D15 U20-48D5 U20-48S3.3 VIn 9-36 VDC 9-36 VDC 9-36 VDC 9-36 VDC 9-36 VDC 9-36 VDC 9-36 VDC 18-72 VDC 18-72 VDC 18-72 VDC 18-72 VDC 18-72 VDC 18-72 VDC 18-72 VDC VOut 5.0 VDC 12.0 VDC 15.0 VDC ±12.0 VDC ±15.0 VDC ±5.0 VDC 3.3 VDC 5.0 VDC 12.0 VDC 15.0 VDC ±12.0 VDC ±15.0 VDC ±5.0 VDC 3.3 VDC IOut 4000.0 mA 1670.0 mA 1330.0 mA ±833.0 mA ±666.0 mA ±2000.0 mA 4000.0 mA 4000.0 mA 1670.0 mA 1330.0 mA ±833.0 mA ±666.0 mA ±2000.0 mA 4000.0 mA INo Load 15.0 mA 15.0 mA 15.0 mA 20.0 mA 20.0 mA 20.0 mA 15.0 mA 10.0 mA 10.0 mA 10.0 mA 15.0 mA 15.0 mA 15.0 mA 10.0 mA IFull Load 1029.0 mA 1006.0 mA 1004.0 mA 1004.0 mA 1004.0 mA 1004.0 mA 705.0 mA 508.0 mA 497.0 mA 496.0 mA 496.0 mA 496.0 mA 496.0 mA 353.0 mA Eff 81% 83% 83% 83% 83% 83% 78% 82% 84% 84% 84% 84% 84% 78% Case U U U U U U U U U U U U U U • Servers, Switches and Data Storage • Wireless Communications • Distributed Power Architecture • Semiconductor Test Equipment Applications • Networking Gear • Data Communications • Telecommunications • Industrial / Medical The U20 Families of high efficiency DC/DC converters offer power levels of up to 20 Watt, which exceeds that of other bricks with the same Industry-Standard Pinouts, while providing much smaller footprints. With a ultra- wide input voltage range and single and multi-outputs, ranging from 3.3 to ±15 Volts, these converters provide versatility without sacrificing the board space. All models feature an input filter, input undervoltage lockout, output current limiting and short circuit protection. The fully enclosed, encapsulated construction achieves very efficient heat transfer with no hot spots. All converters combine creative design practices with highly derated power devices to achieve very high reliability, high performance and low cost solution to systems designers. Approval Pending Specifications & Features Summary Typical at Ta= +25 ºC under nominal line voltage and 75% load conditions, unless noted. The information and specifications contained in this brief are believed to be accurate and reliable at the time of publication. Specifications are subject to change without notice. Refer to product specification sheet for performance characteristics and application guidelines. Consult factory for hundreds of other available input/output voltage configurations. Input Specifications Input Voltage Range Input Filter Positive Logic Remote ON/OFF Control Output Specifications Voltage Accuracy Single Output Voltage Accuracy Dual + Output Voltage Accuracy Dual - Output Voltage Balance, Dual Output at Full Load Transient Response Single 25% Step Load Change Dual FL, 1/2L +/- 1% Error Band External Trim Adj. Range Ripple and Noise 20MHz BW Temperature Coefficient Short Circuit Protection Line Regulation1, Single Dual / Output Load Regulation2, Single Dual / Output General Specifications Efficiency Isolation Capacitance Isolation Resistance Switching Frequency Operating Temperature Range Derating, Above 60oC Case Temperature Storage Temperature Range EMI / RFI Dimensions Case Material Notes 1 2 3 Measured From High Line to Low Line Measured From Full Load to 1/4 Load Remote On/Off Control : ON > +5.5VDC or Open Circuit OFF < 1.8VDC Control Common---Referenced to input minus 12V Nominal: 9-36Vin 48V Nominal: 18-72Vin Pi Type See Note 3 +/-1.0% max. +/-1.0% max. +/-2.0% max. +/-1.0% max.