W15C-48S15

W15C SERIES DC/DC MODULES MODEL NUMBER W15C-12S5 W15C-12S5.1 W15C-12S12 W15C-12S15 W15C-12D12 W15C-12D15 W15C-12D5 W15C-12D5.1 W15C-12S3.3 W15C-24S5 W15C-24S5.1 W15C-24S12 W15C-24S15 W15C-24D12 W15C-24D15 W15C-24D5 W15C-24D5.1 W15C-24S3.3 W15C-48S5 W15C-48S5.1 W15C-48S12 W15C-48S15 W15C-48D12 W15C-48D15 W15C-48D5 W15C-48D5.1 W15C-48S3.3 INPUT VOLTAGE 9-18VDC 9-18VDC 9-18VDC 9-18VDC 9-18VDC 9-18VDC 9-18VDC 9-18VDC 9-18VDC 18-36VDC 18-36VDC 18-36VDC 18-36VDC 18-36VDC 18-36VDC 18-36VDC 18-36VDC 18-36VDC 36-72VDC 36-72VDC 36-72VDC 36-72VDC 36-72VDC 36-72VDC 36-72VDC 36-72VDC 36-72VDC OUTPUT VOLTAGE 5 VDC 5.1 VDC 12 VDC 15 VDC ±12 VDC ±15 VDC ±5 VDC ±5.1 VDC 3.3 VDC 5 VDC 5.1 VDC 12 VDC 15 VDC ±12 VDC ±15 VDC ±5 VDC ±5.1 VDC 3.3 VDC 5 VDC 5.1 VDC 12 VDC 15 VDC ±12 VDC ±15 VDC ±5 VDC ±5.1VDC 3.3 VDC OUTPUT CURRENT 3000mA 2940mA 1250mA 1000mA ±625mA ±500mA ±1500mA 1470mA 3000mA 3000mA 2940mA 1250mA 1000mA ±625mA ±500mA ±1500mA 1470mA 3000mA 3000mA 2940mA 1250mA 1000mA ±625mA ±500mA ±1500mA 1470mA 3000mA INPUT CURRENT NO LOAD FULL LOAD 20mA 1582mA 20mA 1582mA 20mA 1524mA 20mA 1524mA 30mA 1506mA 30mA 1506mA 30mA 1543mA 30mA 1543mA 20mA 20mA 20mA 20mA 20mA 25mA 25mA 25mA 25mA 20mA 15mA 15mA 15mA 15mA 20mA 20mA 20mA 20mA 15mA 1086mA 780mA 780mA 762mA 762mA 755mA 755mA 772mA 772mA 543mA 391mA 391mA 377mA 377mA 377mA 377mA 381mA 381mA 271mA % EFF. 79 79 82 82 83 83 81 81 76 80 80 82 82 83 83 81 81 76 80 80 83 83 83 83 82 82 76 CASE W15C W15C W15C W15C W15C W15C W15C W15C W15C W15C W15C W15C W15C W15C W15C W15C W15C W15C W15C W15C W15C W15C W15C W15C W15C W15C W15C • Servers, Switches and Data Storage • Wireless Communications • Distributed Power Architecture • Semiconductor Test Equipment Applications • Networking Gear • Data Communications • Telecommunications • Industrial / Medical The W15C Families of high efficiency DC/DC converters offer power levels of up to 15 Watt, which exceeds that of other bricks with the same Industry-Standard Pinouts, while providing much smaller footprints. With a wide input voltage range and single and multi-outputs, ranging from 3.3 to ±15 Volts, these converters provide versatility without sacrificing the board space. All models feature an input filter, input undervoltage lockout, output current limiting and short circuit protection. The fully enclosed, encapsulated construction achieves very efficient heat transfer with no hot spots. All converters combine creative design practices with highly derated power devices to achieve very high reliability, high performance and low cost solution to systems designers. Approval Pending Specifications & Features Summary • 500V, 10MΩ input-to-output isolation • No airflow or heatsink required • Efficiency up to 83% • Six Sided Continuous Shield • 2:1 Input Range • Pi Input Filter • Continuous Short Circuit Protection • Meets EN55022 Class A, Conducted • Remote On/Off Option Pin # 1 2 3 4 5 6 W15C S(ingle) +Vin -Vin +Vout NP / Trim Option Vout NP / Remote Option W15C D(ual) +Vin -Vin +Vout Common Vout – NP / Remote Option Tolerances Inches • XX ±0.040 • XXX ±0.010 Input Specifications Input Voltage Range Input Filter Output Specifications Voltage Accuracy Single Output Voltage Accuracy Dual+Output Voltage Accuracy Dual-Output Voltage Balance Dual Ouptut at Full Load Transient Response Single 25% Step Load Change Dual FL. 1/2 +/- 1% Error Band Ripple and Noise. 20MHz BW Terperature Coefficient Short Circuit Protection Line Regulation1 Single Dual/Output Load Regulation2 Single Dual/Output General Specifications Efficiency Isolation Voltage Isolation Resistance Switching Frequency Operating Temperature Range Case Temperature Cooling Storage Temperature Range EMI / RFI Dimensions Case Material 12V----------9-18V 24V--------18-36V 48V--------36-72V Pi Type +/-1.0% max. +/-1.0% max. +/-1.0% max. +/-1.0% max. ±10%, Single Output Only Typical at Ta= +25 ºC under nominal line voltage and full load conditions, unless noted. The information and specifications contained in this brief are believed to be accurate and reliable at the time of publication. Specifications are subject to change without notice. Refer to product specification sheet for performance characteristics and application guidelines. Consult factory for hundreds of other available input/output voltage configurations. Intronics Power Inc. 1400 Providence Highway, Building 2, Norwood, MA 02062-5015 Phone: 1-781-551-5500 Fax: 1-781-551-5555 Rev. C • •