W7-12S15

 1400 PROVIDENCE HIGHWAY • BUILDING 2 NORWOOD, MASSACHUSETTS 02062-5015 WWW.INTRONICS.COM W7 SERIES DC/DC MODULES • Servers, Switches and Data Storage • Wireless Communications • Distributed Power Architecture • Semiconductor Test Equipment Applications • Networking Gear • Data Communications • Telecommunications • Industrial / Medical The W7 Family of high efficiency DC/DC converters offer power levels of up to 7 Watt, which exceeds that of other sub-bricks with the same package, while also providing Surface Mount Processable construction. With a wide input voltage range and single and multi-outputs, these converters provide versatility without sacrificing the board space. All models feature an input filter, continuous short circuit protection and regulated outputs. The fully enclosed, encapsulated construction facilitates maximum power delivered with the highest efficiency of up to 83%. All converters combine creative design practices with highly derated power devices to achieve very high reliability, high performance and low cost solution to systems designers. Specifications & Features Summary • No minimum load required • Regulated Outputs • -25°C to +71°C ambient operation • Continuous Short-circuit protection • 1500V, 10MΩ input-to-output isolation • Pi Input Filter • Voltage Accuracy ± 2% • 2:1 Input Range Model Number W7-12S5 W7-12S12 W7-12S15 W7-12D5 W7-12D12 W7-12D15 W7-12S3.3 W7-24S5 W7-24S12 W7-24S15 W7-24D5 W7-24D12 W7-24D15 W7-24S3.3 W7-48S5 W7-48S12 W7-48S15 W7-48D5 W7-48D12 W7-48D15 W7-48S3.3 Vin Range • 5-sided metal shield • 270 – 330KHz Switching Frequency • Input Undervoltage Lockout • Output Overvoltage Protection Approval • Output Current Limiting • No airflow or heatsink required • Delivers up to 7.5W in 1”x1.25”x0.45” package with Industry-Standard SMD Pinouts • THROUGH-HOLE PACKAGES AVAILABLE (add suffix “T” to the part number) Input Current No Load Full Load 25mA 801mA 25mA 762mA 25mA 762mA 30mA 791mA 30mA 753mA 30mA 753mA 25mA 557mA 20mA 396mA 20mA 381mA 20mA 381mA 25mA 386mA 25mA 377mA 25mA 377mA 20mA 271mA 10mA 195mA 10mA 190mA 10mA 190mA 15mA 193mA 15mA 188mA 15mA 188mA 10mA 136mA Eff (%) 78 82 82 79 83 83 74 79 82 82 81 83 83 76 80 82 82 81 83 83 76 Regulation Line/Load ±0.2/1.1% ±0.2/0.2% ±0.2/0.1% ±0.2/0.5% ±0.2/0.1% ±0.2/0.1% ±0.2/1.1% ±0.2/1.1% ±0.2/0.2% ±0.2/0.1% ±0.2/0.5% ±0.2/0.1% ±0.2/0.1% ±0.2/1.1% ±0.2/1.1% ±0.2/0.2% ±0.2/0.1% ±0.2/0.5% ±0.2/0.1% ±0.2/0.1% ±0.2/1.1% Startup delay Typ (ms) 0.4 2.2 2.5 1.7 5 10 0.5 15 20 20 20 20 25 20 15 20 20 20 20 25 20 Overshoot Typ (%) 5 2 2 4 2 2 10 5 2 2 4 2 2 10 5 2 2 4 2 2 10 Pending 9-18Vdc 18-36Vdc 36-72Vdc Output Voltage Current 5VDC 1500mA 12VDC 625mA 15VDC 500mA ±5VDC ±750mA ±12VDC ±310mA ±15VDC ±250mA 3.3VDC 1500mA 5VDC 1500mA 12VDC 625mA 15VDC 500mA ±5VDC ±750mA ±12VDC ±310mA ±15VDC ±250mA 3.3VDC 1500mA 5VDC 1500mA 12VDC 625mA 15VDC 500mA ±5VDC ±750mA ±12VDC ±310mA ±15VDC ±250mA 3.3VDC 1500mA Rise time Typ (ms) 0.2 2 2.3 1.5 4.5 6 0.4 0.2 2 2.3 1.5 4.5 6 0.4 0.2 2 2.3 1.5 4.5 6 0.4 Hold Time Typ (us) 100 100 100 100 100 100 100 100 100 100 100 100 100 100 200 200 200 200 200 200 200 Recovery Typ (us) 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 Dynamic Response 2% 2% 2% 2% 2% 2% 2% 2% 2% 2% 2% 2% 2% 2% 2% 2% 2% 2% 2% 2% 2% Output Ripple/Noise 50mVp-p 50mVp-p 50mVp-p 60mVp-p 60mVp-p 60mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 60mVp-p 60mVp-p 60mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 60mVp-p 60mVp-p 60mVp-p 50mVp-p Typical at Ta= +25 ºC under nominal input voltages of 12V, 24V and 48VDC, unless noted. The information and specifications contained in this brief are believed to be accurate and reliable at the time of publication. Specifications are subject to change without notice. Refer to product specification sheet for performance characteristics and application guidelines. Consult factory for hundreds of other available input/output voltage configurations. Single Output Typical Connection Dual Output Typical Connections Recommended Land Pattern Through-Hole Mechanical Drawing 0.80 (20.3) 0.15 (3.8) 24 23 22 0.20 (5.1) 300 250 200 150 100 50 0 0 Recommended Reflow Profile 1 2 3 1.25 (31.8) 5 TOP VIEW 9 10 11 12 0.60 (15.2) 16 15 14 13 0.40 (10.2) 0.10 (2.5) 125% Output current 100% 75% 50% 25% 0% 50 100 150 200 250 300 Derating Curve 0.08 (2.0) Natural convection cooling All Dimensions in inches (mm); tolerance •xx = ± 0.02, •xxx = ±0.010 Pin size is 0.020” (0.5mm) DIA or 0.020’ x 0.014” -25 0 25 50 Ambient Temperature(oC) 75 100 Intronics, Inc. 1400 Providence Highway, Building 2, Norwood, MA 02062-5015 Phone: 1-800-367-0004, 1-781-551-5500 Fax: 1-781-551-5555 Rev. A • •