IPS608-05I

IP Semiconductor Co., Ltd. High sensitive triggering levels, the IPS608 series SCRs is suitable for all applications, where the available gate current is limited, such as capacitive discharge ignitions, motor control in kitchen aids, overvoltage crowbar protection in low power supplies… IPS608-xxI 1. Cathode 2. Anode RGK 3. Gate MAIN FEATURES Symbol IT(AV) VDRM / VRRM IGT IPAK(TO-251) Value 8 600 ≤ 100 Unit A V uA ABSOLUTE MAXIMUM RATINGS Parameter Storage Junction Temperature Range Operating Junction Temperature Range Repetitive Peak Off-state Voltage Repetitive Peak Reverse Voltage Tj = 25℃ Tj = 25℃ Ti = 105℃ Ti = 105℃ Symbol Tstg Tj VDRM VRRM IT(RMS) IT(AV) Value -40 to +150 -40 to +110 600 600 8 5 Unit ℃ V A A RMS on–state current (180 conduction angle) Average on-state current (180 conduction angle) Non repetitive surge peak on–state Current (Tj = 25℃) tp = 10ms tp = 8.3ms I²t Value for fusing ITSM 70 73 24.5 50 4 1 A tp = 10ms I²t dI/dt IGM PG(AV) A²s A/us A W Critical rate of rise of on state current (IG = 2 X IGT, tr≤100ns, f = 50Hz, Tj = 110℃ Peak gate current Average gate power dissipation tp = 20us, Tj = 125℃ Tj = 125℃ 4F, Cheong won B/D, 269 Hyoje-dong, Jongno-gu, Seoul, 110-480 Korea Tel : +82-70-7574-2839, Fax : +82-2-6280-6382, sales@ipsemiconductor.com 1 IPS608-xxI ELECTRICAL CHARACTERISTICS (Tj = 25 ℃ unless otherwise specified) IPS608-xxI Symbol Test Condition 05 MIN MAX MAX VD=VDRM, RL=3.3KΩ, RGK = 220Ω Tj = 125℃ IG = 1mA RGK = 1KΩ IT = 50mA RGK = 1KΩ IT = 16A tp = 380uS Tj = 25 ℃ VD = 65% VDRM RGK = 220Ω Tj = 125℃ VDRM = VRRM RGK = = VRRM RGK = Unit IGT VD = 6V RL = 140Ω VGT 20 100 0.8 uA V VGD MIN 0.1 V IL IH VTM dV/dt MAX MAX MAX MIN MAX MAX 6 5 1.6 5 5 1 6 ~ 35 mA mA V V/us uA mA KΩ 220Ω Tj = 25℃ 220Ω Tj = 125℃ IDRM VDRM RGK THERMAL RESISTANCES Symbol Rth (j – c) Parameter Junction to case(DC) TO-251 Value 20 Unit ℃/W 4F, Cheong won B/D, 269 Hyoje-dong, Jongno-gu, Seoul, 110-480 Korea Tel : +82-70-7574-2839, Fax : +82-2-6280-6382, sales@ipsemiconductor.com 2 IPS608-xxI PACKAGE MECHANICAL DATA TO-251(IPAK) Dimensions Ref Millimeters Min A A2 B B2 B3 B4 C C2 D E G H L L1 L2 V1 0.45 0.48 6 6.4 4.4 16 8.9 1.8 1.37 4º 2.2 0.9 0.55 5.1 0.76 0.32 0.62 0.62 6.2 6.7 4.7 16.7 9.4 1.9 1.5 0.017 0.019 0.236 0.252 0.173 0.630 0.35 0.071 0.054 4º Inches Min 0.086 0.035 0.021 0.200 0.030 0.013 0.024 0.024 0.244 0.264 0.185 0.658 0.37 0.075 0.059 Typ Max 2.4 1.1 0.65 5.4 0.85 Typ Max 0.095 0.043 0.026 0.212 0.033 4F, Cheong won B/D, 269 Hyoje-dong, Jongno-gu, Seoul, 110-480 Korea Tel : +82-70-7574-2839, Fax : +82-2-6280-6382, sales@ipsemiconductor.com 3 IPS608-xxI 4F, Cheong won B/D, 269 Hyoje-dong, Jongno-gu, Seoul, 110-480 Korea Tel : +82-70-7574-2839, Fax : +82-2-6280-6382, sales@ipsemiconductor.com 4