4700

TaNFilm® Precision SIP Network Commercial and MIL Qualified High purity alumina substrate 4700 Series • Inherent reliability • MIL-PRF-83401 qualified • Custom configuration available • Bonded leads not susceptible to solder reflow problems • Absolute tolerance to ±0.1% - ratio accuracy to ±0.01% • Absolute TCR to ±15ppm/°C - ratio accuracy to ±5ppm/°C Sputtered tantalum nitride with passivation oxide layer Copper leads electroplated with gold over nickel, hot tinned leads available Lid and ceramic substrate totally filled with an epoxy adhesive Thermal compression bonded lead terminations provide exceptional reliability The IRC 4700 Series is the ultimate combination of precision performance, reliability, and long term stability in a low profile, TaNFilm® SIP package. Rugged welded lead construction combined with the inherent passivation characteristics of tantalum nitride insure superior ongoing performance over the installed life of the part. Visit our website to view a graphical demonstration of IRC’s TaNFilm reliability and performance features. Electrical Data Schematic Resistance Range (Ω) 49.9 - 99.9 100 - 200 201 - 1.9K 2.0K - 200K 20 - 49.9 50.0 - 199 Absolute Tolerance F, G, J B, D, F, G, J B, D, F, G, J B, D, F, G, J F, G, J D, F, G, J B, D, F, G, J B, D, F, G, J B, D, F, G, J F, G, J F, G, J B, D, F, G, J B, D, F, G, J Ratio Tolerance F, G D, F, G B, D, F, G A, B, D, F, G F, G B, D, F, G A, B, D, F, G T, Q, A, B, D, F, G A, B, D, F, G F, G D, F, G B, D, F, G A, B, D, F, G Absolute TCR (ppm/°C) ±50; ±100; ±300 ±25; ±50; ±100; ±300 ±25; ±50; ±100; ±300 ±15; ±25; ±50; ±100; ±300 ±50; ±100; ±300 ±25; ±50; ±100; ±300 ±25; ±50; ±100; ±300 ±15; ±25; ±50; ±100; ±300 ±15; ±25; ±50; ±100; ±300 ±50; ±100; ±300 ±25; ±50; ±100; ±300 ±25; ±50; ±100; ±300 ±15; ±25; ±50; ±100; ±300 Tracking TCR (ppm/°C) ±20 ±15 Element Power (mW) C Commercial 120 ±10 ±5 ±20 ±5 ±5 ±5 ±5 ±20 ±10 120 200 - 999 1.0K - 200K ±5 ±5 200 G Commercial 200 - 999 1.0K - 100K 101K - 400K 49.9 - 99.9 100 - 199 F Commercial Consult factory for tighter tolerances and TCR. Custom circuits and special testing available. General Note IRC reserves the right to make changes in product specification without notice or liability. All information is subject to IRC’s own data and is considered accurate at time of going to print. © IRC Advanced Film Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com A subsidiary of TT electronics plc 4700 Series Issue January 2009 Sheet 1 of 4 TaNFilm® Precision SIP Network Commercial and MIL Qualified MIL-PRF-83401 Qualification Data Schematic C G Resistance Range 100 - 100K 100 - 100K Absolute Tolerance B, F, G, J B, F, G, J Element Power 120 200 Size 6, 8, 10 6, 8, 10 Characteristic M, H, K M, H, K Package Specification Data Schematic C, F (MIL and Commercial) G (MIL) G (Commercial) Package Power (mW) 6-pin 600 360 600 8-pin 840 480 800 10-pin 1080 800 1000 Voltage Rating Temperature Range Substrate Lead Finish Noise not to exceed 100V √ PxR _____ -65°C to +125°C 99.6% Alumina Gold Plate (60/40 Sn/Pb available)