4N24AU

Product Bulletin JANTX4N22AU September 1996 Surface Mount Optically Coupled Isolators Types JANTX, JANTXV, 4N22AU, 4N23AU, 4N24AU .058 (1.47) Features Absolute Maximum Ratings (TA = 25o C unless otherwise noted) • JANTX, JANTXV qualified per MIL- Input-to-Output Isolation Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 1.0 kVDC(1) Storage and Operating Temperature Range. . . . . . . . . . . . . . . . . . -65o C to +125o C Soldering Temperature (vapor phase reflow) . . . . . . . . . . . . . . . . . . . . . . . . . . 215o C Soldering Temperature (heated collet for 5 sec) . . . . . . . . . . . . . . . . . . . . . . . 260o C Input Diode Forward DC Current (65o C or below) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 mA(2) Reverse Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.0 V Peak Forward Current (1 µs pulse width, 300 pps) . . . . . . . . . . . . . . . . . . . . . . 1.00 A Output Sensor Continuous Collector Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 mA Collector-Emitter Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 V Collector-Base Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 V Emitter-Base Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.0 V Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300 mW(3) PRF-19500/486 • Surface Mountable • 1 kV Electrical Isolation • Base contact provided for conventional transistor biasing Description The 4N22AU, 4N23AU, and 4N24AU series are DESC qualified, surface mount optically coupled isolators. High reliability processing on the devices is performed in accordance with MIL-PRF19500/486. Each device in the series consists of an infrared emitting diode and an NPN silicon phototransistor mounted in a hermetically sealed ceramic surface mount package. Notes: (1) Measured with input diode leads shorted together and output leads shorted together. (2) Derate linearly 0.67 mA/o C above 65o C. (3) Derate linearly 3.0 mW/o C above 25o C. Typical screening and lot acceptance tests are provided on page 13-4. The burn-in condition is VCE = 10 V, IF = 40 mA, PD = 275 mW, TA = 25o C. Refer to MIL-PRF-19500/486 for complete requirements. When ordering parts without processing, do not use a JAN prefix. Optek Technology, Inc. 1215 W. Crosby Road Carrollton, Texas 75006 15-22 (972)323-2200 Fax (972)323-2396 Types JANTX, JANTXV, 4N22AU, 4N23AU, 4N24AU Electrical Characteristics (TA = 25o C unless otherwise noted) Symbol Parameter Type Min Typ Max Units Test Conditions 0.80 1.30 V IF = 10.0 mA 1.00 1.50 V IF = 10.0 mA, TA = -55o C 0.70 1.20 V IF = 10.0 mA, TA = 100o C 100 µA VR = 2.0 V Input Diode Forward Voltage VF IR Reverse Current Output Phototransistor V(BR)CBO Collector-Base Breakdown Voltage 35 V IC = 100 µA, IE = 0, IF = 0 V(BR)CEO Collector-Emitter Breakdown Voltage 35 V IC = 1.0 mA, IB = 0, IF = 0 V(BR)EBO Emitter-Base Breakdown Voltage 4.0 V IE = 100 µA, IC = 0, IF = 0 nA µA VCE = 20 V, IB = 0, IF = 0 VCE = 20 V, IB = 0, IF = 0, TA = 100o C 0.15 2.50 4N22AU 1.00 1.00 mA mA mA mA VCE = 5.0 V, IB = 0, IF = 2.0 mA VCE = 5.0 V, IB = 0, IF = 10.0 mA VCE = 5.0 V, IB = 0, IF = 10.0 mA, TA = -55o C VCE = 5.0 V, IB = 0, IF = 10.0 mA, TA = 100o C 0.20 6.00 4N23AU 2.50 2.50 mA mA mA mA VCE = 5.0 V, IB = 0, IF = 2.0 mA VCE = 5.0 V, IB = 0, IF = 10.0 mA VCE = 5.0 V, IB = 0, IF = 10.0 mA, TA = -55o C VCE = 5.0 V, IB = 0, IF = 10.0 mA, TA = 100o C 0.40 10.00 4N24AU 4.00 4.00 mA mA mA mA VCE = 5.0 V, IB = 0, IF = 2.0 mA VCE = 5.0 V, IB = 0, IF = 10.0 mA VCE = 5.0 V, IB = 0, IF = 10.0 mA, TA = -55o C VCE = 5.0 V, IB = 0, IF = 10.0 mA, TA = 100o C IC(OFF) Collector-Emitter Dark Current 100 100 Coupled On-State Collector Current IC(ON) Collector-Emitter Saturation VCE(SAT) Voltage 4N22AU 4N23AU 4N24AU DC Current Gain 4N22AU 4N23AU 4N24AU hFE RIO Resistance (Input to Output) CIO Capacitance (Input to Output) 0.30 0.30 0.30 V 200 300 400 VCE = 5.0 V, IC = 10.0 mA, IF = 0 mA 1011 5.0 Output Rise Time 4N22AU 4N23AU 4N24AU 15.0 15.0 20.0 µs µs µs Output Fall Time 4N22AU 4N23AU 4N24AU 15.0 15.0 20.0 µs µs µs tr tf Optek Technology, Inc. 1215 W. Crosby Road IC = 2.5 mA, IB = 0, IF = 20.0 mA IC = 5.0 mA, IB = 0, IF = 20.0 mA IC = 10.0 mA, IB = 0, IF = 20.0 mA Ω VIO = ± 1000 Vdc(1) pF VIO = 0.0 V, f = 1.0 MHz(1) Carrollton, Texas 75006 15-23 VCC = 10.0 V, IF = 10.0 mA, RL = 100 Ω (972) 323-2200 Fax (972) 323-2396