GUS-QS8A-03-1002-C

Surface Mount QSOP Resistor Networks QSOP Series • • • • • Reliable, no internal cavity High resistor density - .025" lead spacing Standard JEDEC 16, 20, and 24 pin packages Ultra-stable TaNSil® resistors on silicon substrate RoHS compliant and Sn/Pb terminations available IRC’s TaNSil® QSOP resistor networks are the perfect solution for high volume applications that demand a small wiring board footprint. The 0.025" lead spacing provides higher lead density, increased component count, lower resistor cost, and high reliability. The tantalum nitride film system on silicon provides precision tolerance, exceptional TCR tracking, low cost and miniature package. Excellent performance in harsh, humid environments is a trademark of IRC’s self-passivating TaNSil® resistor film. The QSOP series is ideally suited for the latest surface mount assembly techniques and each lead can be 100% visually inspected. The compliant gull wing leads relieve thermal expansion and contraction stresses created by soldering and temperature excursions. For applications requiring high performance resistor networks in a low cost, surface mount package, specify IRC QSOP resistor networks. Electrical Data Resistance Range Absolute Tolerance Ratio Tolerance to R1 Absolute TCR Tracking TCR Element Power Rating @ 70°C Isolated Schematic Bussed Schematic Package Power Rating @ 70°C Rated Operating Voltage ______ (not to exceed √ P x R) Operating Temperature Noise 100mW 50mW 16-Pin 20-Pin 24-Pin 750mW 1.0W 1.0W 10 to 250KΩ To ±0.1% To ±0.05% To ±25ppm/°C To ±5ppm/°C Environmental Data Test Per MIL-PRF-83401 Typical Delta R Max Delta R Thermal Shock ±0.02% ±0.1% Power Conditioning ±0.03% ±0.1% High Temperature Exposure ±0.03% ±0.05% Short-time Overload ±0.02% ±0.05% 100 Volts -55°C to +125°C