Power Inductor
Model HA55/HA55L
Features:
•
•
•
•
•
Operating temperature range -40°C to +155°C
High inductance, high efficiency and excellent current handling
Use as DC-DC converter and in high current applications,
suitable for industrial as well as automotive applications
RoHS Compliant
AEC-Q200 Certified
Description:
The HA55/HA55L series power inductors are designed with a special composite iron powder core material to maximize
inductance, temperature performance and saturation current while minimizing DC resistance and physical size. The usage of
helical coil in its construction has excellent heat dissipation properties, low skin effect and low copper losses in a lightweight
through hole package.
These series are ideal for high current applications and harsh environment as it has stable performance over wide
temperature range. It consists of 9 part numbers with various inductance value. The electrical characteristic of inductance
versus current and temperature rise versus current are available in this datasheet. The HA55/HA55L series are AEC-Q200
certified and RoHS compliant.
Applications:
•
•
•
Power supplies
DC-DC converters
Renewable energy systems
General Note
TT Electronics reserves the right to make changes in product specification without
notice or liability. All information is subject to TT Electronics’ own data and is
considered accurate at time of going to print.
© TT electronics plc
TT Electronics | BI Technologies
A-1445, Jalan Tanjung Api, 25050 Kuantan, Pahang Darul Makmur, Malaysia
Ph: +60 9 565 8888
https://www.ttelectronics.com/contact-us/
Issue 4
03/2023 Page 1
Power Inductor
Model HA55/HA55L
Electrical Specifications
Inductance
(µH)
Typ
Inductance
@Rated
Current
(µH)
Typ
Rated
Current
(A)
Saturation
Current
(A)
DC RESISTANCE
mΩ
Typ
HA55-3623200LF
20.00
14.50
33.0
35.0
HA55-3023115LF
11.50
8.24
39.0
HA55-2223070LF
7.00
5.33
HA55-3023130LF
13.00
HA55L-3623220LF
mΩ
Max
SRF
MHz
Typ
FIGURE
3.35
3.85
14.0
1
43.0
2.30
2.76
33.0
2
40.0
48.0
1.70
2.00
33.0
3
9.33
37.0
40.0
2.50
3.25
19.0
4
22.00
13.00
34.0
26.0
3.35
3.85
12.0
1
HA55L-3023135LF
13.50
8.42
39.0
30.0
2.30
2.76
33.0
2
HA55L-2223088LF
8.83
5.52
41.0
33.0
1.70
2.00
36.0
3
HA55L-3023163LF
16.30
9.38
37.0
27.0
2.50
3.25
25.0
4
HA55L-3623400LF
40.00
24.00
26.0
20.0
5.70
6.20
8.25
1
PART NUMBER
Notes: (1) Inductance is measured at 100kHz, 0.1Vrms, 0Adc.
(2) The rated current is the approximate DC current at which ΔT is approximately 60°C. This current is determined
by soldering the unit on a typical application PCB, and then applying the current to the unit for 30 minutes
(3) Isat is the saturation current at which inductance rolls off approximately 30% from its initial unbias inductance
value
Electrical Schematic
General Note
TT Electronics reserves the right to make changes in product specification without
notice or liability. All information is subject to TT Electronics’ own data and is
considered accurate at time of going to print.
© TT electronics plc
TT Electronics | BI Technologies
A-1445, Jalan Tanjung Api, 25050 Kuantan, Pahang Darul Makmur, Malaysia
Ph: +60 9 565 8888
https://www.ttelectronics.com/contact-us/
Issue 4
03/2023 Page 2
Power Inductor
Model HA55/HA55L
Electrical Characteristics
HA55-3623200LF
HA55-3023115LF
HA55-2223070LF
HA55-3023130LF
HA55L-3623220LF
HA55L-3023135LF
HA55L-2223088LF
HA55L-3023163LF
HA55L-3623400LF
General Note
TT Electronics reserves the right to make changes in product specification without
notice or liability. All information is subject to TT Electronics’ own data and is
considered accurate at time of going to print.
© TT electronics plc
TT Electronics | BI Technologies
A-1445, Jalan Tanjung Api, 25050 Kuantan, Pahang Darul Makmur, Malaysia
Ph: +60 9 565 8888
https://www.ttelectronics.com/contact-us/
Issue 4
03/2023 Page 3
Power Inductor
Model HA55/HA55L
Electrical Characteristics
HA55-3623200LF
HA55-3023115LF
HA55-2223070LF
HA55-3023130LF
HA55L-3623220LF
HA55L-3023135LF
HA55L-2223088LF
HA55L-3023163LF
HA55L-3623400LF
General Note
TT Electronics reserves the right to make changes in product specification without
notice or liability. All information is subject to TT Electronics’ own data and is
considered accurate at time of going to print.
© TT electronics plc
TT Electronics | BI Technologies
A-1445, Jalan Tanjung Api, 25050 Kuantan, Pahang Darul Makmur, Malaysia
Ph: +60 9 565 8888
https://www.ttelectronics.com/contact-us/
Issue 4
03/2023 Page 4
Power Inductor
Model HA55/HA55L
Outline dimension (mm)
28 TYP
19.5 TYP
1.6x2.5
1.2x2.5 (HA55-3623400LF)
13 TYP
23 MAX
FIGURE 1
1.6 X 2.5
13 TYP
FIGURE 2
14.3 TYP
21 TYP
YYWW MALAYSIA
BI HA55-XXXXXXXLF
17 MAX
30 MAX
1.6X2.5
13 TYP
23 MAX
YYWW MALAYSIA
17 MAX
22 MAX
23 MAX
. 5±0.5
1 MAX UNTINNED AREA
BI HA55-XXXXXXXLF
. 5±0.5
1 MAX UNTINNED AREA
17 MAX
30 MAX
YYWW MALAYSIA
23 MAX
YYWW MALAYSIA
BI HA55-XXXXXXXLF
17 Max
36 MAX
. 5±0.5
1 MAX UNTINNED AREA
BI HA55-XXXXXXXLF
5±0.5
1 MAX UNTINNED AREA
1.6X2.5
13 TYP
FIGURE 4
FIGURE 3
Order Information
HA55 - XXXX XXX LF
Lead-Free
Model Series
Case Size
Eg 3623 = 36Max Length, 23 Max Width
Inductor Code :
Eg 115 = 11.5 uH
1) 1 shipping carton 72pcs (Case size 3623)
2) 1 shipping carton 108pcs (Case size 3023)
3) 1 shipping carton 144pcs (Case size 2223)
General Note
TT Electronics reserves the right to make changes in product specification without
notice or liability. All information is subject to TT Electronics’ own data and is
considered accurate at time of going to print.
© TT electronics plc
TT Electronics | BI Technologies
A-1445, Jalan Tanjung Api, 25050 Kuantan, Pahang Darul Makmur, Malaysia
Ph: +60 9 565 8888
https://www.ttelectronics.com/contact-us/
Issue 4
03/2023 Page 5
Cautions & Warnings
1. All components are manufactured, designed, and promoted for application in general electronic devices. For specific
application uses such as in the automotive, medical, military, and aerospace industries other than general electronic devices,
BI Technologies must be asked for written approval before incorporating the components into those areas. This clause can
be omitted for any existing product or new product that had been designed and proven tested for critical application such as
automotive, medical, military and aerospace industry.
2. Any components that will be used in high-reliability / high-level safety applications should be pre-evaluated by the end
customer, especially in customer applications in which the malfunction or failure of an electronic component could
endanger human life or health.
3. The customer shall be responsible for evaluating and confirming that BI Technologies' products are suitable for use in
customer applications. If the customer applications require a very high level of operational safety, especially if failure of an
electronic component could endanger human life or health, it must be ensured by using a suitable design of the customer
application or other action taken by the customer such that no injury or damage is sustained by third parties in the event of
a malfunction or failure of an electronic component.
4. Customers must be cautioned to verify that the data sheets are updated before placing orders, especially for standard
series.
5. The customer needs to use the part within the warranty period as stated in the quotation. Any trouble or failure of
electronic components happening during their long life span which cannot be eliminated even after following the instruction
within existing technology, BI Technologies would not be liable for it.
6. Many coating/potting materials would shrink as they harden. They, therefore, apply pressure on the plastic housing or
core. This pressure can affect electrical properties and, in extreme cases, can damage the core or plastic housing
mechanically. It is necessary to check whether the coating or potting material used may attack or destroy the wire insulation,
plastics, or glue. The effect of the coating or potting material can change the high-frequency behaviour of the components.
Many coating and potting materials have a negative effect (chemically and mechanically) on the winding wires, insulation
materials, and connecting points. Customers are always obligated to determine whether and to what extent their coating
materials influence the component. Customers are responsible for and bear all risks associated with the use of the coating
material. BI Technologies does not assume any liability for failures of our components that are caused by the coating
material.
7. The washing/cleaning process may jeopardize the product and cause a defect. Washing agents may harm the long-term
functionality of the product. The customer shall be responsible for evaluating and confirming the product is suitable for use
in the customer's applications after the washing/cleaning process, as this is customer process-related.
8. Products should not be kept in unsuitable storage conditions, such as areas susceptible to high humidity, high
temperatures, dust, or corrosion, where, for example, atmospheres should be free of chlorine and sulfur-bearing
compounds. Recommended storage condition in general is +10°C … +40 °C, humidity ≤75% RH. Temperature fluctuations
should be minimized to avoid condensation on the parts. Avoid storage near strong magnetic fields, as this might magnetize
the product.
9. The storage period should not be longer than 12 months (in the specific storage environment). Oxidization may occur on
the terminals; therefore, all products shall be consumed within 12 months after the shipping date. If the time is longer than
12 months, please check the solderability before using it.
10. Don't touch electrode terminals directly with bare hands, as oil stains may inhibit proper soldering. Always ensure
optimum conditions for soldering.
11. Terminals should not be bent or subjected to excessive stress. If the terminals are cable harness types, do not use the
cable harness to carry the unit or pull the cable harness with force, it may cause failure on the unit immediately or have a
latent effect.
General Note
TT Electronics reserves the right to make changes in product specification without
notice or liability. All information is subject to TT Electronics’ own data and is
considered accurate at time of going to print.
© TT electronics plc
TT Electronics | BI Technologies
A-1445, Jalan Tanjung Api, 25050 Kuantan, Pahang Darul Makmur, Malaysia
Ph: +60 9 565 8888
https://www.ttelectronics.com/contact-us/
Issue 4
03/2023 Page 6
Cautions & Warnings
12. Avoid placing magnetic components near the edge of the PCB. It is at the customer's discretion to have the proper
design and PCB layout so that components are not damaged in any way during handling or cause any EMI issues.
13. Don't touch any exposed winding part and avoid coming into contact with the guide of the electrode as due to the
charge stored may cause an electric shock. It is the customer's discretion to inform all relevant personal handling the
components accordingly.
14. The inductor/coil/common mode choke generates heat when current is applied. Please take into consideration this
during the design or testing stage.
15. Ferrites are sensitive to direct impact. This can cause the core material to flake, or lead to breakage of the core. Always
handle the product with care to prevent any damage.
16. Our specification specifies the quality of the component as a single unit. Please ensure the component is thoroughly
evaluated in the customer application circuit, therefor even for customized products, conclusive validation of the
component in the circuit can only be carried out by the customer.
17. The general testing condition is at the room temperature of 25°C +/- 5°C and humidity under 70% RH, which is applied to
all products. It is the customer's responsibility to validate that a particular product with the properties described in the
product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications
may vary in different applications and performance may vary over time. All operating parameters, including typical
parameters, must be validated for each customer application by the customer.
18. If you have any queries, please feel free to contact our sales team.
General Note
TT Electronics reserves the right to make changes in product specification without
notice or liability. All information is subject to TT Electronics’ own data and is
considered accurate at time of going to print.
© TT electronics plc
TT Electronics | BI Technologies
A-1445, Jalan Tanjung Api, 25050 Kuantan, Pahang Darul Makmur, Malaysia
Ph: +60 9 565 8888
https://www.ttelectronics.com/contact-us/
Issue 4
03/2023 Page 7