HFR-PCH1632LF

High Frequency Surface Mount Attenuators PCH1632 Series • RoHS compliant • Operation frequency up to 1.5GHz • Ideal impedance conversion solution • Low cost surface mount construction The PCH1632 series impedance converter provides impedance conversion between the two most common characteristic impedances in use, 50Ω and 75Ω. The PCH1632 series provides impedance conversion across a frequency bandwidth of DC to 1.5 GHz with an insertion loss of 6dB. Typical applications include telecommunication and networking equipment as well as applications. Thin film construction provides consistent operational stability over temperature and time. Electrical Data Impedance 50Ω /75Ω Environmental Data Test Short Time Overload Load Life Test Condition 2.5 x Rated Voltage, 5 sec. 1000 Hours 70°C 1000 Hours, 60°C 95% RH 5 Cycles 125°C High, -55°C Low 260°C, 10 sec. 235°C, 3 sec Maximum ±0.05dB ±0.1dB ±0.1dB ±0.05dB ±0.05dB More than 95% Insertion Loss 6 ± 0.3dB Frequency Range DC to 1.5GHz Moisture Resistance Power Rating @70°C Operating Temperature Range Terminations 125mW Temperature Cycle -55°C to +125°C Resistance to Soldering Heat Solderability 100% Sn General Note IRC reserves the right to make changes in product specification without notice or liability. All information is subject to IRC’s own data and is considered accurate at time of going to print. © IRC Advanced Film Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com A subsidiary of TT electronics plc PCH1632 Series Issue February 2009 Sheet 1 of 2 High Frequency Surface Mount Attenuators Physical Data a1 a1 L2 4 Input impedance 50Ω t 1 Schematic 2 L1 L2 Output impedance 75Ω 3 a2 Dimensions (mm) 3 L1 L2 a1 a2 t 1 2 1.6 ± 0.2 0.4 ± 0.2 1.0 ± 0.2 3.2 ± 0.2 0.5 ± 0.2 1, 2: Input and output terminals 3: Electrode (surface soldering and lead-free possible) 4: Covering resin Power Derating Curve 100 Ordering Data Prefix Model HFR - PCH1632LF - 50/75 PCH1632LF = Converter with 100% Sn terminatons 50/75 = 50 to 75Ω converter % Of Rated Power Impedance 60 0 25 70 125 Ambient Temperature (°C) © IRC Advanced Film Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com PCH1632 Series Issue February 2009 Sheet 2 of 2