HFR-RFA150LF-02220

High Frequency Surface Mount Attenuators RFAXXX-0 Series • RoHS compliant • Power dissipation up to 150W • High frequency operation up to 3GHz The RFAXXX-0 series power attenuator has a low VSWR from DC to 3GHz. High frequency performance combined with high power dissipation make this an ideal RF power attenuator. Typical applications are RF and microwave power amplifiers, RF transmitters, receivers and meters where a reduction in power is needed while maintaining transmission line characteristic impedances. Electrical Data RFA100-0xx Power Rating @70°C Impedance Frequency Range Operating Temperature Range Attenuation Attenuation Tolerance at DC Types 010, 020, 030 Terminations Types 012, 022, 032 Gold (Au) plated copper 100W (Heatsinked) 50Ω DC - 3GHz -55°C to +155°C 20dB, 30dB ±0.4 dB Tin (Sn) plated copper RFA150-0xx 150W (Heatsinked) General Note IRC reserves the right to make changes in product specification without notice or liability. All information is subject to IRC’s own data and is considered accurate at time of going to print. © IRC Advanced Film Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com A subsidiary of TT electronics plc RFAXXX-0 Series Issue February 2009 Sheet 1 of 4 High Frequency Surface Mount Attenuators Physical Data RFA100 010, RFA100 020, RFA100 030 RFA150 010, RFA150 020, RFA150 030 RFA100 012, RFA100 022, RFA100 032 RFA150 012, RFA150 022, RFA150 032 E D E F F C A B D E B E C (6.0) A (6.0) Dimensions (mm) Model and Type RFA100 010 / 012 RFA100 020 / 022 RFA100 030 / 032 RFA150 010 / 012 RFA150 020 / 022 RFA150 030 / 032 A B C D 1.0 ± 0.3 1.0 ± 0.3 1.1 ± 0.3 1.0 ± 0.3 1.0 ± 0.3 1.1 ± 0.3 E F* 5.84 ± 0.15 5.84 ± 0.25 5.72 ± 0.25 7.62 ± 0.15 7.62 ± 0.25 6.35 ± 0.25 8.89 ± 0.15 8.89 ± 0.25 8.90 ± 0.25 11.43 ± 0.15 11.43 ± 0.25 9.52 ± 0.25 1.1 max 1.1 max 1.1 max 1.1 max 1.1 max 1.1 max 0.3 ± 0.1 0.3 ± 0.1 0.3 ± 0.1 0.3 ± 0.1 0.3 ± 0.1 0.3 ± 0.1 (1.5) (1.05) (1.1) (1.5) (1.05) (1.1) *Note: Dimension F does not apply to types 012, 022 and 032. © IRC Advanced Film Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com RFAXXX-0 Series Issue February 2009 Sheet 2 of 4 High Frequency Surface Mount Attenuators Frequency Performance Data RFA100 030 20DB (S11) Impedance CH1 S 11 hp RFA100 030 30DB (S11) Impedance CH1 S 11 hp 1 U FS 1: 49.381 W 1.1348 W 180.06 pH 1 U FS 1: 47.074 W 0.416 W 66.211 pH 1 002. 999 970 MHz 2: 50.52 W 2.6367 W 1.5 GHz 3: 52.801 W 3.4609 W 2 GHz PRm Cor 1 000. 000 000 MHz 2: 46.797 W 2.9102 W 1.5 GHz 3: 48.965 W 5.1797 W 2 GHz PRm Cor ↑ 1 234 5 4: 56.295 W 2.291 W 2.5 GHz 5: 59.516 W -1.7363 W 3 GHz ↑ 1 2345 4: 52.484 W 5.5547 W 2.5 GHz 5: 56.547 W 4.0684 W 3 GHz START .030 000 MHz STOP 3 000. 000 000 MHz START .030 000 MHz STOP 3 000. 000 000 MHz RFA150 030 20DB Impedance CH1 S 11 hp RFA150 030 30DB Impedance 441.9 pH 1 U FS 1: 50.135 W 2.7773 W CH1 S 11 hp 1 U FS 1: 49.811 W 1.4063 W 222.94 pH 1 000. 299 997 MHz 2: 51.611 W 5.4629 W 1.5 GHz 3: 56.348 W 7.5996 W 2 GHz 1 003. 899 961 MHz 2: 50.488 W 3.3457 W 1.5 GHz 3: 53.211 W 5.4258 W 2 GHz PRm Cor PRm Cor ↑ 1 234 5 4: 63.48 W 6.7559 W 2.5 GHz 5: 73.035 W 0.4766 W 3 GHz ↑ 1 23 4 5 4: 53.67 W 5.0176 W 2.5 GHz 5: 65.172 W 0.957 W 3 GHz START .030 000 MHz STOP 3 000. 000 000 MHz START .030 000 MHz STOP 3 000. 000 000 MHz © IRC Advanced Film Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com RFAXXX-0 Series Issue February 2009 Sheet 3 of 4 High Frequency Surface Mount Attenuators Environmental Data Test Condition Load Life Moisture Load Life Solder Heat Resistance Solderability 1000 Hours, 70°C 1000 Hours, 40°C 95% RH 350°C, 3 sec. Maximum ±1.0% ±1.0% ±1.0% >95% coverage Power Derating Curve 100 % Of Rated Power 60 0 25 70 125 Ambient Temperature (°C) Ordering Data Prefix Model Type HFR - RFA100LF - 010 - 20dB RFA100LF; RFA150LF 010; 020; 030 = Tin plated copper pads 012; 022; 032 = Tin plated copper-alloy beam leads Attenuation 20dB; 30dB © IRC Advanced Film Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com RFAXXX-0 Series Issue February 2009 Sheet 4 of 4