MWR-MWC01GC-02-1000-G

MWR-MWC01GC-02-1000-G

  • 厂商:

    IRCTT(TT电子)

  • 封装:

  • 描述:

    MWR-MWC01GC-02-1000-G - TaNFilm Microwave Chip Resistor - IRC - a TT electronics Company.

  • 详情介绍
  • 数据手册
  • 价格&库存
MWR-MWC01GC-02-1000-G 数据手册
TaNFilm® Microwave Chip Resistor MWR Series • • • • • Long life self passivating TaNFilm® element Low absolute TCR to ±25ppm/°C Performance characterized to 40GHz Wire-bonded, ribbon-bonded or solder mounted Flip chip mounting – keeps resistor element in the same plane as circuit IRC Advanced Film Division The MWR series is specifically designed for transmission line termination at high frequencies. Characterized for high frequency performance to 40GHz, the MWR series provides superior terminator performance to generic “off-the-shelf” chip resistors. Constructed with IRC’s proprietary TaNFilm® self passivating thin film resistive element, the MWR series chips possess the rugged environmental characteristics proven through decades of the most demanding military, space, telecommunications, computer, medical and networking applications. Available with a choice of solderable or bondable termination finishes, the MWR series termination chips are suitable for solder attachment as well as chip and wire or ribbon attached hybrid circuits. Back side mounting is facilitated by an optional gold finish. For demanding microwave/RF transmission line termination applications in harsh environments, select the IRC MWR series of high frequency termination chips. Electrical Data MWC01 40°C Power Rating 70°C Ohmic Value Available DC Tolerances Operating Temperature Range Termination Substrate Maximum Operating Voltage (not to exceed √P x R ) Stray Distributed Capacitance 125mW 50Ω, 75Ω, 100Ω ±10%, ±5%, ±2%, ±1% -55°C to 100°C 60/40 Sn/Pb or Gold 99.6% Alumina 50V
MWR-MWC01GC-02-1000-G
物料型号: - 型号为MWR系列,具体型号为MWC01。

器件简介: - MWR系列是专为高频传输线终止而设计的,具有长达40GHz的高频性能,提供优越的终止器性能。 - 采用IRC专有的TaNFilm®自钝化薄膜电阻元件,拥有经过数十年军事、太空、电信、计算机、医疗和网络应用验证的坚固环境特性。

引脚分配: - 提供有焊盘或可焊接终止端的选择,适用于焊料连接以及芯片和线或带连接的混合电路。背面安装可通过选择性金镀层来实现。

参数特性: - 40°C功率额定值为70°C时250mW,125°C时125mW。 - 欧姆值有50、75、100三种。 - 直流公差有±10%、±5%、±2%、±1%。 - 工作温度范围为-55°C至100°C。 - 终止材料为60/40锡/铅或金。 - 基板材料为99.6%氧化铝。 - 最大工作电压不超过50V。 - 杂散分布电容小于0.05pF。

功能详解: - MWR系列电阻专为微波/射频传输线终止应用设计,在恶劣环境下提供高性能。

应用信息: - 适用于军事、太空、电信、计算机、医疗和网络等要求高的领域。

封装信息: - 零件封装在2" x 2"华夫格包装中,每包400件。 - 前端终止有60/40锡/铅焊料;背面可选金镀层。
MWR-MWC01GC-02-1000-G 价格&库存

很抱歉,暂时无法提供与“MWR-MWC01GC-02-1000-G”相匹配的价格&库存,您可以联系我们找货

免费人工找货