OP804SL

NPN Phototransistor OP804SL, OP805SL, OP830SL OP800WSL, OP801WSL, OP802WSL, OP830WSL Obsolete (OP800SL) Features: • • • • • • “WSL” TO-18 hermetically sealed package Mechanically and spectrally matched to OP130 and OP230 LEDs TX and TXV process available (see Hi-Rel section) Choice of narrow or wide receiving angle Variety of sensitivity ranges Enhanced temperature range Description: Each device in this series consists of a NPN silicon phototransistor mounted in a hermetically sealed TO-18 package that offers high power dissipation and superior hostile environment operation. The OP800SL (Obsolete), OP804SL, OP805SL and OP830SL devices have a narrow receiving angle that provides excellent on-axis coupling and a bonded base lead that enables conventional transistor biasing. The OP800WSL, OP801WSL, OP802WSL and OP830WSL all have a wide receiving angle that provides relatively even reception over a large area. Devices are 100% production tested using an infrared light source for close correlation with OPTEK’s GaAs and GaAIAs emitters. The OP800SL and devices are mechanically and spectrally matched to OP130 and OP230 series LEDs. The OP800WSL devices are mechanically and spectrally matched to OP130W and OP230W series devices. Please refer to Application Bulletins 208 and 210 for additional design information and reliability (degradation) data. Applications: • Space-limited applications • Hostile environment applications • Applications requiring high power dissipation Part Number Guide — OPXXX OP X X X X OPTEK Component 8 — TO-18 Package 0 — Phototransistor 3 — Photodarlington SL — Tested at 2870° K WSL — Tested at 2870° K Part Description: OP80__SL OP80__WSL OP830SL OP830WSL = TO-18 dome lens, phototransistor 4 and 5 sensitivity levels tested with 2870° K light source = TO-18 flat lens, phototransistor 0 through 2 sensitivity levels tested with 2870° K light source = TO-18 dome lens, photodarlington tested with 2870° K light source = TO-18 flat lens, photodarlington tested with 2870° K light source RoHS General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT electronics plc TT Electronics | OPTEK Technology 2900 E. Plano Pkwy, Plano, TX 75074 | Ph: +1 972 323 2200 www.ttelectronics.com | sensors@ttelectronics.com Rev C 05/2022 Page 1 NPN Phototransistor OP804SL, OP805SL, OP830SL OP800WSL, OP801WSL, OP802WSL, OP830WSL Obsolete (OP800SL) OP800SL, OP830SL .068 (1.73) .045 (1.14) .202 (5.13) .187 (4.75) OP800SL Series 1 1 .019 (0.48) .016 (0.41) 2 Places Collector (Case) .048 (1.22) .028 (0.71) .230 (5.84) .209 (5.31) Collector Base 2 NPN Trans. Emitter 3 3 [MILLIMETERS] INCHES X THIS DIMENSIOIN CONTROLLED AT HOUSING SURFACE. DIMENSIONS ARE IN: OP830SL 3 3 Pin # OP80X _ _ _ OP830_ _ _ 1 Collector Collector 2 Base — 3 Emitter Emitter 1 1 OP800WSL, OP830WSL OP830WSL 3 [MILLIMETERS] INCHES X THIS DIMENSION CONTROLLED AT HOUSING SURFACE. 3 DIMENSIONS ARE IN: OP800WSLSeries 1 1 1 3 General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT electronics plc TT Electronics | OPTEK Technology 2900 E. Plano Pkwy, Plano, TX 75074 | Ph: +1 972 323 2200 www.ttelectronics.com | sensors@ttelectronics.com Rev C 05/2022 Page 2 NPN Phototransistor OP804SL, OP805SL, OP830SL OP800WSL, OP801WSL, OP802WSL, OP830WSL Obsolete (OP800SL) Electrical Specifications Absolute Maximum Ratings (TA = 25° C unless otherwise noted) Storage Temperature Range -65o C to +150o C Operating Temperature Range -65o C to +125o C Collector-Base Voltage (applies to OP800SL only - does not apply to OP800WSL) 30 V Collector-Emitter Voltage OP800 (SL, WSL) OP830 (SL, WSL) 30 V 15 V Emitter-Base Voltage (applies to OP800 (SL, WSL) only) 5V Emitter-Collector Voltage (applies to all OP800 and OP830 devices) 5V 50 mA Continuous Collector Current 260° C(1) Lead Soldering Temperature [1/16 inch (1.6 mm) from case for 5 seconds with soldering iron] 250 mW(2) Power Dissipation Notes: 1. RMA flux is recommended. Duration can be extended to 10 seconds maximum when flow soldering. A maximum 20 grams force may be applied to the leads when soldering. 2. Derate linearly 2.5 mW/° C above 25° C. 3. Junction temperature maintained at 25° C. 4. Light source is an unfiltered tungsten bulb operating at CT = 2870 K. = = = General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT electronics plc TT Electronics | OPTEK Technology 2900 E. Plano Pkwy, Plano, TX 75074 | Ph: +1 972 323 2200 www.ttelectronics.com | sensors@ttelectronics.com Rev C 05/2022 Page 3 NPN Phototransistor OP804SL, OP805SL, OP830SL OP800WSL, OP801WSL, OP802WSL, OP830WSL Obsolete (OP800SL) Electrical Specifications Electrical Characteristics (TA = 25° C unless otherwise noted) SYMBOL IC(ON)(3) PARAMETER On-State Collector Current OP800SL OP804SL OP805SL OP800WSL OP801WSL OP802WSL OP830SL OP830WSL Collector Dark Current OP800 (SL, WSL) OP830 (SL, WSL) ICEO MIN TYP MAX UNITS TEST CONDITIONS 0.5 7.0 15 0.3 0.5 2.5 - 22 3 2 3 15 4 - - - - 100 1 nA VCE = 10 V, EE = 0 30 15 - - V IC = 100 µA VCE = 5 V, EE = 2.5 mW/cm2(2)(3)(4) mA VCE = 5 V, EE = 0.25 mW/cm2(2)(3)(4) V(BR)CEO Collector-Emitter Breakdown Voltage OP800 (SL, WSL) OP830 (SL, WSL) V(BR)CBO Collector-Base Breakdown Voltage [applies to OP800SL only] 30 - - V IC = 100 µA V(BR)ECO Emitter-Collector Breakdown Voltage 5.0 - - V IE = 100 µA V(BR)EBO Emitter-Base Breakdown Voltage [applies to OP800SL only] 5.0 - - V IE = 100 µA Collector-Emitter Saturation Voltage OP800WSL OP800SL OP830SL OP830WSL - - 0.4 0.4 1.2 1.2 tr Rise Time - 7 - µs tf Fall Time - 7 - µs VCE(SAT) (3) V IC = .4 mA, EE = 2.5 mW/cm2(4) IC = 400 µA, EE = 2.5 mW/cm2(4) IC = 1 mA, EE = 0.25 mW/cm2(4) IC = 1.0 mA, EE = 0.25 mW/cm2(4) VCC = 5 V, IC = 0.80 mA, RL = 100 Ω (See Test Circuit) Notes: 1. RMA flux is recommended. Duration can be extended to 10 seconds maximum when flow soldering. A maximum 20 grams force may be applied to the leads when soldering. 2. Derate linearly 2.5 mW/° C above 25° C. 3. Junction temperature maintained at 25° C. 4. Light source is an unfiltered tungsten bulb operating at CT = 2870 K or equivalent infrared source. General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT electronics plc TT Electronics | OPTEK Technology 2900 E. Plano Pkwy, Plano, TX 75074 | Ph: +1 972 323 2200 www.ttelectronics.com | sensors@ttelectronics.com Rev C 05/2022 Page 4 NPN Phototransistor OP804SL, OP805SL, OP830SL OP800WSL, OP801WSL, OP802WSL, OP830WSL Obsolete (OP800SL) Performance OP800SL Series General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT electronics plc TT Electronics | OPTEK Technology 2900 E. Plano Pkwy, Plano, TX 75074 | Ph: +1 972 323 2200 www.ttelectronics.com | sensors@ttelectronics.com Rev C 05/2022 Page 5 NPN Phototransistor OP804SL, OP805SL, OP830SL OP800WSL, OP801WSL, OP802WSL, OP830WSL Obsolete (OP800SL) Performance OP800WSL Series General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT electronics plc TT Electronics | OPTEK Technology 2900 E. Plano Pkwy, Plano, TX 75074 | Ph: +1 972 323 2200 www.ttelectronics.com | sensors@ttelectronics.com Rev C 05/2022 Page 6 NPN Phototransistor OP804SL, OP805SL, OP830SL OP800WSL, OP801WSL, OP802WSL, OP830WSL Obsolete (OP800SL) Performance OP830SL Series General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT electronics plc TT Electronics | OPTEK Technology 2900 E. Plano Pkwy, Plano, TX 75074 | Ph: +1 972 323 2200 www.ttelectronics.com | sensors@ttelectronics.com Rev C 05/2022 Page 7 NPN Phototransistor OP804SL, OP805SL, OP830SL OP800WSL, OP801WSL, OP802WSL, OP830WSL Obsolete (OP800SL) Performance OP830WSL Series General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT electronics plc TT Electronics | OPTEK Technology 2900 E. Plano Pkwy, Plano, TX 75074 | Ph: +1 972 323 2200 www.ttelectronics.com | sensors@ttelectronics.com Rev C 05/2022 Page 8