OP910W

Product Bulletin OP910W December 1998 PIN Silicon Photodiode Type OP910W Dimensions are in inches (millimeters). Features Absolute Maximum Ratings (TA = 25oC unless otherwise noted) • Wide receiving angle • Fast switching time • Linear response vs. irradiance • Enhanced temperature range Reverse Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 V Storage Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -65o C to +150o C Operating Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . -65o C to +125o C Lead Soldering Temperature [1/16 inch (1.6mm) from case for 5 sec. with soldering iron] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200oC(1) Power Dissipation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 250 mW Description The OP910W consists of a PIN silicon photodiode mounted in a two-leaded hermetic TO-46 package. The flat lens has an acceptance half angle of ±40o. Notes: (1) RMA Flux is recommended. Duration can be extended to 10 sec. max. when flow soldering. (2) Light source is an unfiltered GaAs LED with a peak wavelength of 935 nm and a radiometric intensity level which varies less than 10% over the entire lens surface of the photodiode being tested. (3) Junction temperature maintained at 25 o C. (4) To calculate typical dark current in nA, use the formula ID=10(0.42 TA-1.5) where TA is ambient temperature in o C. (5) Derate linearly 2.5 mW/o C above 25o C. Typical Performance Curves Typical Spectral Response Wavelength - nm Optek Technology, Inc. 1215 W. Crosby Road Carrollton, Texas 75006 21 (972) 323-2200 Fax (972) 323-2396 Type OP910W Electrical Characteristics (TA = 25o C unless otherwise noted) SYMBOL PARAMETER IL Light Current ID Dark Current V(BR)R Reverse Voltage Breakdown MIN TYP MAX UNITS 1.7 2.4 1 10 100 TEST CONDITION mA VR = 20 V, Ee = .50 mW/cm2 note 2, 3 nA VR = 20 V, Ee = 0.0 V IR = 100 mA tr Rise Time 10 nS VR = 20 V, RL = 50 OHMS tf Fall Time 10 nS VR = 20 V, RL = 50 OHMS ∅ Half Angle +/-40 degr. CP Capacitance 13 pF VR = 0 V, F = 1 Mhz, Ee = 0 VF Forward Voltage V IF = 100 mA 1.2 IF = Constant Typical Performance Curves Normalized Light Current vs. Reverse Voltage Total Capacitance vs. Reverse Voltage TA = 25o C Ee = 0 mW/cm 2 f = 1 MHz Normalized Light and Dark Current vs. Ambient Temperature VR = 5 V λ = 935 nm Normalized to TA = 25o C Light Current TA = 25o C λ = 935 nm Dark Current VR - Reverse Voltage - V Light Current vs. Irradiance VR - Reverse Voltage - V TA - Ambient Temperature - o C Switching Time Test Circuit Light Current vs. Angular Displacement q - Angular Displacement - Deg. Ee - Irradiance - mW/cm 2 Optek reserves the right to make changes at any time in order to improve design and to supply the best product possible. Optek Technology, Inc. 1215 W. Crosby Road Carrollton, Texas 75006 (972)323-2200 Fax (972)323-2396 22