OPA729GD

® OPA729_ (120° Beam Angle)       10, 1 watt LEDs per strip, can be linked with other OPA729’s Mono-color per strip (Blue, Green, Red, Yellow, White) Two component beam angle options (120° or 40°) Power connected to either end Universal connector (Tyco 2-292173-2 mates with 173977-2) RoHS Compliant OPA729_D (40° Beam Angle) The OPA729 Series are designed for areas where lighting intensity and reliability are essential. The light beam angles of 40° and 120° are ideal for illuminating small and medium size areas while requiring minimal space. A High Performance Heat Spreader (HPHS) is used to ensure the best heat dissipation of any light assembly in the industry. OptoTherm® is designed to be the optimum material for distribution of heat for high power devices. For custom colors and design contact your OPTEK representative. Electrical / Optical Characteristics: TA=25°C, IF=700mA Part Number Typical Forward Voltage (V) Luminous Flux (lm) OPA729Y 12.5 OPA729B Color Dominant Wavelength 350 Yellow 587 nm 18.0 90 Blue 470 nm OPA729G 18.0 480 Green 530 nm OPA729R 12.5 260 Red 625 nm OPA729W 18.0 480 White 6,500°K OPA729YD 12.5 350 Yellow 587 nm OPA729BD 18.0 90 Blue 470 nm OPA729GD 18.0 480 Green 530 nm OPA729RD 12.5 260 Red 625 nm OPA729WD 18.0 480 White 6,500°K RoHS Beam Angle 120° 40° DO NOT LOOK DIRECTLY AT LED WITH UNSHIELDED EYES OR DAMAGE TO RETINA MAY OCCUR. ® OPA729_ See OVSP_BCR4 for component specifications OPA729_D See OVSP_4CR44 for component specifications + Voltage Ground