OPB716

Product Bulletin OPB715 June 1998 January 2006 Photologic Reflective Object Sensor Types OPB715, OPB716, OPB717, OPB718 Features • Focused for maximum sensitivity • 0.5”(12.7mm) sensing distance • Panel mount • Choice of output configurations • 18”minimum wire length Description The OPB715 series reflective assembly consists of a GaAIAs LED and a Photologic sensor enclosed in an IR transmissive housing. The sensor is characterized to detect paper at 0.5” (12.7 mm). However, the OPB715 has a wide operating distance range and is capable of detecting reflective objects at longer distances. Even low reflectance materials can be detected at shorter distances. The sensor’s panel-mount plastic housing shields stray light and is terminated with 18”wire leads. The output can be specified as either TTL totem-pole or TLL open-collector in buffer or inverter polarity. The LED is current limited internally for design convenience. DIMENSIONS ARE IN INCHES (MILLIMETERS). Absolute Maximum Ratings (TA = 25o C unless otherwise noted) Supply Voltage, VCC (not to exceed 2 sec.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 V Storage Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40o C to +85o C Operating Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40o C to +85o C Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300 mW(1) Output Voltage (Open-Collector only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 V Notes: (1) Derate linearly at 5.00 mW/oC above 25o C. (2) Terminating wire is 7 strand, 26 AWG, UL 1429. (3) Tested at d = 0.5”(12.7 mm) from a 90% diffuse, white test surface. Reference: Eastman Kodak Catalog #1257795. (4) No reflective surface. For RoHS compliant devices add "Z" to the end of the part number: OPB715Z Optek Technology, Inc. 1215 W. Crosby Road Carrollton, Texas 75006 25 (972) 323-2200 Fax (972) 323-2396 Types OPB715, OPB716, OPB717, OPB718 Electrical Characteristics (TA = -40o C to +85o c unless otherwise specified) SYMBOL PARAMETER VCC Operating D.C. Supply Voltage ICCL Low Level Supply Current: MIN TYP MAX UNITS 5.25 V OPB715: Buffered Totem-Pole Output OPB716: Buffered Open-Collector Output 50 mA VCC = 5.25 V, Output Open OPB717: Inverted Totem-Pole Output OBP718: Inverted Open-Collector Output 50 mA VCC = 5.25 V, Output Open 50 mA VCC = 5.25 V, Output Open OPB717: Inverted Totem-Pole Output OPB718: Inverted Open-Collector Output 50 mA VCC = 5.25 V, Output Open IOH High Level Output Current: OPB716: Buffered Open-Collector Output OPB718: Inverted Open-Collector Output 100 100 µA µA VCC = 5 V, VOH = 5 V(3) VCC = 5 V, VOH = 5 V(4) IOS Short Circuit Output Current: OPB715: Buffered Totem-Pole Output OPB717: Inverted Totem-Pole Output VOL Low Level Output Voltage: OPB715: Buffered Totem-Pole Output OPB716: Buffered Open-Collector Output 0.4 V VCC = 5 V, I OL = 12.8 mA(4) 0.4 V VCC = 5 V, I OL = 12. 8 mA(3) I CCH 4.75 TEST CONDITIONS High Level Supply Current: OPB715: Buffered Totem-Pole Output OPB716: Buffered Open-Collector Output OPB717: Inverted Totem-Pole Output OPB718: Inverted Open-Collector Output OPB715: Totem-Pole Buffer Output OPB716: Open-Collector Buffer Output OPB717: Totem-Pole Inverter Output OPB718: Open-Collector Inverter Output Optek reserves the right to make changes at any time in order to improve design and to supply the best product possible. Optek Technology, Inc. 1215 W. Crosby Road Carrollton, Texas 75006 (972)323-2200 Fax (972)323-2396 26