OPI1280-080

Fiber Optic Isolator—Phototransistor Sensor OPI1280 Series Features:  Opaque plas c housings   High noise immunity   IR LED with Phototransistor Output    0.100” (2.54 mm) lead spacing   Data Transfer through plas c fiber op c cable   Isola on voltage 15 KV (OPI1280‐032), Longer versions higher Description: Each OPI1280 consists of a IR LED and a Phototransistor sensor, which are housed in separate opaque molded plas c housings and coupled by plas c fiber op c cable. The heavy‐duty opaque housing shields the op cal signal from dust, making this series of devices ideal for dust contaminated environments. The OPI1280 series are designed for applica ons that require high voltage isola on between input and output or signal communica on over short distances. Depending on the length of the fiber op c cable, the emi er does not have to be op cally in‐line with the sensor. The isola on voltage is greater than 10 K volts per inch (Isola on distance between components) for all versions of the OPI1280.   Custom electrical, wire and cabling and connectors are available. Contact your local representa ve or OPTEK for more informa on. Applications: Ordering Information  Requiring High Voltage isola on between input and output  Electrical isola on in dirty environments  Industrial equipment  Medical equipment 3 4 RoHS 1 2 Part Number OPI1280‐018 Lead Spacing ±.08” [2] 0.88” [22.4 mm] Device Length ±.08” [2] 1.22” [31 mm] OPI1280‐026 1.20” [30.5 mm] 1.53” [38.9 mm] 1.18” [30 mm] OPI1280‐032 1.42” [36.1 mm] 1.76” [44.7 mm] 1.40” [35.6 mm] OPI1280‐066 2.78” [70.6 mm] 3.11” [79 mm] 2.76” [70 mm] PIN # FUNCTION 1 Anode 2 Cathode 3 Collector 4 Emitter LED Peak Wavelength Lead Length 890 nm 0.43” [11 mm] Tolerances are ± .010” [.25] unless otherwise stated dimensions are in inches [millimeters] General Note TT Electronics reserves the right to make changes in product specifica on without no ce or liability. All informa on is subject to TT Electronics’ own data and is considered accurate at me of going to print. © TT electronics plc Creepage ±.08” [2] 0.86” [22 mm] TT Electronics | OPTEK Technology 2900 E. Plano Pkwy, Plano, TX 75074 | Ph: +1 972 323 2200 www. electronics.com | sensors@ electronics.com Rev H 09/2022 Page 1 Fiber Optic Isolator-Phototransistor Sensor OPI1280 Series Electrical Specifications Absolute Maximum RaƟngs (TA = 25° C unless otherwise noted) Storage Temperature Range (note 4) ‐40° C to +80° C Opera ng Temperature Range (note 4) ‐20° C to +75° C Lead Soldering Temperature [1/16 inch (1.6 mm) from case for 5 seconds with soldering iron] 260° C(1) Power Dissipa on (2) 100 mW Electrical Characteristics (TA = 25° C unless otherwise noted) PARAMETER SYMBOL MIN TYP MAX UNITS TEST CONDITIONS 1.2 ‐ 2.3 V IF = 20 mA ‐ ‐ 50 nA VCE = 10 V, EE = 0 LED (See OP240 for additional electrical information) VF Forward Voltage SENSOR—Phototransistor (See OP550 for additional information) ICEO Collector Dark Current V(BR)CEO Collector‐Emitter Breakdown Voltage 33 ‐ ‐ V IC = 100 µA, EE = 0 V(BR)ECO Emitter‐Collector Breakdown Voltage 5.5 ‐ ‐ V IE = 100 µA, EE = 0 IC(ON) Collector ON Current 0.36 ‐ ‐ mA VCE = 5 V, IF = 10 mA IISO(3) Leakage Current ‐ ‐ 1.0 µA I @ 7 KV RMS, 25° C, Test Dura on = 2 sec. COUPLED Notes: 1. RMA flux is recommended. Dura on can be extended to 10 seconds maximum when flow soldering. A maximum 20 grams force may be applied to the leads when soldering. 2. Derate linearly 1.33 mW/° C above 25° C. 3. Isola on voltage tes ng is required. 4. Storage and Opera ng temperature values are based on the plas c op cal interface temperature ra ngs. Please reference UL1577 and UL file AVLVZ.E89328 General Note TT Electronics reserves the right to make changes in product specifica on without no ce or liability. All informa on is subject to TT Electronics’ own data and is considered accurate at me of going to print. © TT electronics plc TT Electronics | OPTEK Technology 2900 E. Plano Pkwy, Plano, TX 75074 | Ph: +1 972 323 2200 www. electronics.com | sensors@ electronics.com Rev H 09/2022 Page 2 Fiber Optic Isolator-Phototransistor Sensor OPI1280 Series Performance Output Current vs Forward Current vs Temperature 5.0 Normalized IF = 10mA, Vce = 5V, Ta = 20°C 4.5 Normalized Output Current 4.0 3.5 3.0 2.5 -40°C -20°C 0°C 20°C 40°C 60°C 80°C 100°C 2.0 1.5 1.0 0.5 0.0 0 5 10 15 20 25 30 35 40 Forward Current ( mA) General Note TT Electronics reserves the right to make changes in product specifica on without no ce or liability. All informa on is subject to TT Electronics’ own data and is considered accurate at me of going to print. © TT electronics plc TT Electronics | OPTEK Technology 2900 E. Plano Pkwy, Plano, TX 75074 | Ph: +1 972 323 2200 www. electronics.com | sensors@ electronics.com Rev H 09/2022 Page 3