Optically Coupled Isolator
OPI7002, OPI7002RCE, OPI7010, OPI7010RCE
OPI7320RCE, OPI7340RCE
Features:
± 6 kV dc electrical isola on
Inexpensive plas c housing
Choice of phototransistor or photodarlington output
UL registered File No. E58730
Description:
Each OPI7002 and OPI7010 consists of an infrared emi ng diode coupled to a NPN silicon phototransistor. The LED and
sensor are encased in a black, low‐cost plas c housing. Pin spacing is compa ble with standard dual‐in‐line packages.
Each OPI7320RCE and OPI7340RCE consists of an infrared emi ng diode coupled to a NPN silicon photodarlington. The
LED and sensor are encased in a high dielectric plas c housing. Pin spacing is compa ble with standard dual‐in‐line
packages.
The RCE versions reverses the Phototransistor Emi er and Collector pin‐out.
Custom electrical, wire and cabling and connectors are available. Contact your local representa ve or OPTEK for more
informa on.
Ordering Informa on
Applications:
Requiring high voltage isola on between
input and output
Electrical isola on in dirty environments
Industrial equipment
Medical equipment
Office equipment
OPI7002, OPI7010
2
1
3
4
Part
Number
OPI7002
OPI7010
OPI7320RCE
OPI7340RCE
Lead
Isola on
CTR IF (mA) VCE (Volts)
Length /
Voltage
Max
Min Typ / Max
Spacing
(,000)
LED
Peak
Wavelength
Sensor
890 nm
Transistor
6
890 nm or
935 nm
Darlington
6
20
100
200
400
10 / 50
30
0.30" /
0.30"
5 / 50
15
0.30" /
0.30"
OPI7002RCE, OPI7010RCE
2
1
3
Pin #
LED
Pin #
Transistor/ RCE
2
1
Cathode
Anode
3
4
Collector / Emi er
Emi er / Collector
4
OPI7320RCE, OPI7340RCE
2
3
1
DIMENSIONS ARE IN:
RoHS
4
[MILLIMETERS]
INCHES
General Note
TT Electronics reserves the right to make changes in product specifica on without
no ce or liability. All informa on is subject to TT Electronics’ own data and is
considered accurate at me of going to print.
© TT electronics plc
TT Electronics | OPTEK Technology
2900 E. Plano Pkwy, Plano, TX 75074 | Ph: +1 972 323 2200
www. electronics.com | sensors@ electronics.com
Rev C
10/2017
Page 1
Optically Coupled Isolator
OPI7002, OPI7002RCE, OPI7010, OPI7010RCE
OPI7320RCE, OPI7340RCE
Electrical Specifications
Absolute Maximum Ra ngs (TA = 25° C unless otherwise noted)
Opera ng Temperature Range
‐40° C to +85° C
Storage Temperature Range
‐40° C to +85° C
(1)(4)
±6 kVDC
Input‐to‐Output Isola on Voltage
Lead Soldering Temperature [1/16 inch (1.6 mm) from the case for 5 seconds with soldering iron(2)
260° C
Input Diode
Forward DC Current
50 mA
Peak Forward current (1 µs pulse width, 300 pps)
3A
Reverse Voltage
2V
Power Dissipa on
(3)
100 mW
Output Phototransistor
Collector‐Emi er Voltage
OPI7002, OPI7010, OPI7002RCE, OPI7010RCE
30 V
OPI7320RCE, OPI7340RCE
15 V
Emi er‐Collector Voltage
Power Dissipa on
Notes:
(1)
(2)
(3)
(4)
5.0 V
(3)
100 mW
Measured with input leads and output leads shorted.
RMA flux is recommended. Dura on can be extended to 10 seconds maximum when flow soldering.
Derate linearly 1.66 mW/° C above 25° C.
UL recogni on is for 6kV dc for one minute
General Note
TT Electronics reserves the right to make changes in product specifica on without
no ce or liability. All informa on is subject to TT Electronics’ own data and is
considered accurate at me of going to print.
© TT electronics plc
TT Electronics | OPTEK Technology
2900 E. Plano Pkwy, Plano, TX 75074 | Ph: +1 972 323 2200
www. electronics.com | sensors@ electronics.com
Rev C
10/2017
Page 2
Optically Coupled Isolator
OPI7002, OPI7002RCE, OPI7010, OPI7010RCE
OPI7320RCE, OPI7340RCE
Electrical Specifications
Electrical Characteris cs (TA = 25° C unless otherwise noted)
SYMBOL
PARAMETER
MIN
TYP
MAX
UNITS
TEST CONDITIONS
Input Diode (See OP140 or OP240 for addi onal informa on—for reference only)
VF
Forward Voltage
‐
1.2
1.70
V
IF = 10 mA
IR
Reverse Current
‐
‐
100
µA
VR = 2.0 V
Output Phototransistor (OPI7002, OPI7010) (See OP550 for addi onal informa on—for reference only)
Output Photodarlington (OPI7320, OPI7340) (See OP560 for addi onal informa on—for reference only)
V(BR)CEO
Collector‐Emi er Breakdown Voltage
OPI7002/RCE, OPI7010/RCE
OPI7320RCE, OPI7340RCE
V(BR)ECO
ICEO
30
15
‐
‐
‐
‐
V
Emi er‐Collector Breakdown Voltage
5
‐
‐
V
Collector‐Emi er Dark Current
‐
‐
100
nA
20
100
200
400
‐
‐
‐
‐
‐
‐
‐
‐
IC = 100 µA, IF = 0
IE = 100 µA, IF = 0
VCE = 10 V, IF = 0
Coupled
IC/ IF
DC Current Transfer Ra o
OPI7002, OPI7002RCE
OPI7010, OPI7010RCE
OPI7320RCE
OPI7340RCE
V(SAT)
Collector‐Emi er Satura on Voltage
OPI7002/RCE, OPI7010/RCE
OPI7320RCE, OPI7340RCE
‐
‐
‐
‐
0.4
1.0
V
VISO
Isola on Voltage(1)
6
‐
‐
kVDC
T(ON)
Turn‐On Time
OPI7002/RCE, OPI7010/RCE
OPI7320RCE, OPI7340RCE
‐
‐
4
150
‐
‐
T(OFF)
Turn‐Off Time
OPI7002/RCE, OPI7010/RCE
OPI7320RCE, OPI7340RCE
‐
‐
3
125
‐
‐
‐
0.2
‐
CIO
Capacitance Input‐to‐Output(1)
%
IF = 10 mA, VCE = 5 V
IF = 10 mA, VCE = 5 V
IF = 5 mA, VCE = 5 V
IF = 5 mA, VCE = 5 V
IF = 10 mA, IC = 0.50 mA
IF = 5 mA, IC = 2 mA
See note 1
µs
VCE = 10 V, IC = 10 mA, RL = 100 Ω
pF
VIO = 0, F = 1 MHz
Notes:
(1) Measured with input leads and output leads shorted.
General Note
TT Electronics reserves the right to make changes in product specifica on without
no ce or liability. All informa on is subject to TT Electronics’ own data and is
considered accurate at me of going to print.
© TT electronics plc
TT Electronics | OPTEK Technology
2900 E. Plano Pkwy, Plano, TX 75074 | Ph: +1 972 323 2200
www. electronics.com | sensors@ electronics.com
Rev C
10/2017
Page 3