OPI7010

Optically Coupled Isolator OPI7002, OPI7002RCE, OPI7010, OPI7010RCE OPI7320RCE, OPI7340RCE Features:     ± 6 kV dc electrical isola on Inexpensive plas c housing Choice of phototransistor or photodarlington output UL registered File No. E58730 Description: Each OPI7002 and OPI7010 consists of an infrared emi ng diode coupled to a NPN silicon phototransistor. The LED and sensor are encased in a black, low‐cost plas c housing. Pin spacing is compa ble with standard dual‐in‐line packages. Each OPI7320RCE and OPI7340RCE consists of an infrared emi ng diode coupled to a NPN silicon photodarlington. The LED and sensor are encased in a high dielectric plas c housing. Pin spacing is compa ble with standard dual‐in‐line packages. The RCE versions reverses the Phototransistor Emi er and Collector pin‐out. Custom electrical, wire and cabling and connectors are available. Contact your local representa ve or OPTEK for more informa on. Ordering Informa on  Applications:  Requiring high voltage isola on between input and output  Electrical isola on in dirty environments  Industrial equipment  Medical equipment  Office equipment OPI7002, OPI7010  2 1 3 4   Part  Number  OPI7002  OPI7010  OPI7320RCE  OPI7340RCE  Lead  Isola on   CTR   IF (mA)   VCE (Volts)  Length /  Voltage   Max  Min  Typ / Max  Spacing  (,000)  LED  Peak  Wavelength       Sensor  890 nm Transistor 6 890 nm or 935 nm Darlington 6 20 100 200 400 10 / 50 30 0.30" / 0.30" 5 / 50 15 0.30" / 0.30" OPI7002RCE, OPI7010RCE  2 1 3 Pin #  LED  Pin #  Transistor/ RCE  2 1 Cathode Anode 3 4 Collector / Emi er Emi er / Collector 4 OPI7320RCE, OPI7340RCE  2 3 1 DIMENSIONS ARE IN:  RoHS  4 [MILLIMETERS] INCHES  General Note TT Electronics reserves the right to make changes in product specifica on without no ce or liability. All informa on is subject to TT Electronics’ own data and is considered accurate at me of going to print. © TT electronics plc TT Electronics | OPTEK Technology 2900 E. Plano Pkwy, Plano, TX 75074 | Ph: +1 972 323 2200 www. electronics.com | sensors@ electronics.com Rev C 10/2017 Page 1 Optically Coupled Isolator OPI7002, OPI7002RCE, OPI7010, OPI7010RCE OPI7320RCE, OPI7340RCE Electrical Specifications Absolute Maximum Ra ngs (TA = 25° C unless otherwise noted) Opera ng Temperature Range ‐40° C to +85° C Storage Temperature Range ‐40° C to +85° C (1)(4) ±6 kVDC Input‐to‐Output Isola on Voltage Lead Soldering Temperature [1/16 inch (1.6 mm) from the case for 5 seconds with soldering iron(2) 260° C Input Diode  Forward DC Current 50 mA Peak Forward current (1 µs pulse width, 300 pps) 3A Reverse Voltage 2V Power Dissipa on (3) 100 mW Output Phototransistor  Collector‐Emi er Voltage OPI7002, OPI7010, OPI7002RCE, OPI7010RCE 30 V OPI7320RCE, OPI7340RCE 15 V Emi er‐Collector Voltage Power Dissipa on Notes: (1) (2) (3) (4) 5.0 V (3) 100 mW Measured with input leads and output leads shorted. RMA flux is recommended. Dura on can be extended to 10 seconds maximum when flow soldering. Derate linearly 1.66 mW/° C above 25° C. UL recogni on is for 6kV dc for one minute General Note TT Electronics reserves the right to make changes in product specifica on without no ce or liability. All informa on is subject to TT Electronics’ own data and is considered accurate at me of going to print. © TT electronics plc TT Electronics | OPTEK Technology 2900 E. Plano Pkwy, Plano, TX 75074 | Ph: +1 972 323 2200 www. electronics.com | sensors@ electronics.com Rev C 10/2017 Page 2 Optically Coupled Isolator OPI7002, OPI7002RCE, OPI7010, OPI7010RCE OPI7320RCE, OPI7340RCE Electrical Specifications Electrical Characteris cs (TA = 25° C unless otherwise noted) SYMBOL  PARAMETER  MIN  TYP  MAX  UNITS  TEST CONDITIONS  Input Diode (See OP140 or OP240 for addi onal informa on—for reference only)  VF Forward Voltage ‐ 1.2 1.70 V IF = 10 mA IR Reverse Current ‐ ‐ 100 µA VR = 2.0 V Output Phototransistor (OPI7002, OPI7010) (See OP550 for addi onal informa on—for reference only)  Output Photodarlington (OPI7320, OPI7340) (See OP560 for addi onal informa on—for reference only)  V(BR)CEO Collector‐Emi er Breakdown Voltage OPI7002/RCE, OPI7010/RCE OPI7320RCE, OPI7340RCE V(BR)ECO ICEO 30 15 ‐ ‐ ‐ ‐ V Emi er‐Collector Breakdown Voltage 5 ‐ ‐ V Collector‐Emi er Dark Current ‐ ‐ 100 nA 20 100 200 400 ‐ ‐ ‐ ‐ ‐ ‐ ‐ ‐ IC = 100 µA, IF = 0 IE = 100 µA, IF = 0 VCE = 10 V, IF = 0 Coupled IC/ IF DC Current Transfer Ra o OPI7002, OPI7002RCE OPI7010, OPI7010RCE OPI7320RCE OPI7340RCE V(SAT) Collector‐Emi er Satura on Voltage OPI7002/RCE, OPI7010/RCE OPI7320RCE, OPI7340RCE ‐ ‐ ‐ ‐ 0.4 1.0 V VISO Isola on Voltage(1) 6 ‐ ‐ kVDC T(ON) Turn‐On Time OPI7002/RCE, OPI7010/RCE OPI7320RCE, OPI7340RCE ‐ ‐ 4 150 ‐ ‐ T(OFF) Turn‐Off Time OPI7002/RCE, OPI7010/RCE OPI7320RCE, OPI7340RCE ‐ ‐ 3 125 ‐ ‐ ‐ 0.2 ‐ CIO Capacitance Input‐to‐Output(1) % IF = 10 mA, VCE = 5 V IF = 10 mA, VCE = 5 V IF = 5 mA, VCE = 5 V IF = 5 mA, VCE = 5 V IF = 10 mA, IC = 0.50 mA IF = 5 mA, IC = 2 mA See note 1 µs VCE = 10 V, IC = 10 mA, RL = 100 Ω pF VIO = 0, F = 1 MHz Notes: (1) Measured with input leads and output leads shorted. General Note TT Electronics reserves the right to make changes in product specifica on without no ce or liability. All informa on is subject to TT Electronics’ own data and is considered accurate at me of going to print. © TT electronics plc TT Electronics | OPTEK Technology 2900 E. Plano Pkwy, Plano, TX 75074 | Ph: +1 972 323 2200 www. electronics.com | sensors@ electronics.com Rev C 10/2017 Page 3