OPIA4010DTU

OPIA814, OPIA815, OPIA817 OPIA1210, OPIA4010 DIP Package Features: • • • • 5,000 Vrms electrical isolation Choice of a Single and Dual LED Phototransistor or Photodarlington Sensor Low-cost plastic Dual-In-Line (DIP) package Approval Agency: • • UL Certification No: E58730 VDE No: 40026625 40026536, 40026654 Description: The OPIA series optocouplers are designed for applications that use an analog output (Phototransistor or Photodarlington) in a dual-in-line package. A wide selection of configurations are available. With typical isolation voltage of 5,000 Volts(RMS), these products meet typical power system isolation requirements. Theory of operation: The LED transmitter is used to illuminate the Photosensor providing electrical isolation between two power systems while maintaining the ability to transmit information from one power system to the other. In many applications, analog signal levels may be required to be transmitted between two power systems while maintaining isolation between the power systems up to 5,000 volts(RMS). A variety of LED and photosensor configurations are available depending on the system requirements. The ratio Current Transfer Ratio (CTR) is determined by using the output current and input current for analog photosensors. CTR ratios can range from as low as 5 to over 9,000 depending on the device. CTR = Photosenso r − Current LED − Current = 20 mA * 100 = 200 10 mA All DIP product is shipped in a shipping tube with “TU” identified on the end of the part number. Example: OPIA817DTUE is a 4-Pin DIP shipped in a tube (TU). Applications: • • • • • High voltage isolation: 5,000 Volts RMS PCBoard power system isolation Industrial equipment power isolation Medical equipment power isolation Office equipment RoHS OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A.5 8/09 Page 1 of 17 OPIA814, OPIA815, OPIA817 OPIA1210, OPIA4010 DIP Package Package Outline Dimensions and Schematics: Top-View Pin # Part Number 1 2 3 4 OPIA817 A K E C OPIA814 A-K K-A E C OPIA815 A K E C OPIA4010 A K E C OPIA1210 A K E C Analog Output Devices Ordering Information Part Number Isolation Voltage Max. (Vrms) OPIA817D OPIA814D OPIA815D OPIA4010D OPIA1210D 5,000 5,000 5,000 5,000 5,000 Configuration Information LED Sensor Packaging CTR Min/Typ/Max Typ. Tr / Tf (µs) RL = 100 ohms 50 / - / 600 4/3 60 / - / 600 5/4 70 / - / 80 / 72 600 / - / 9,000 60 / 50 50 / - / 600 2/3 Configuration: Definition of Terms LED Identification—Sensor Identification A = Anode B = Base Part Number Suffix: K = Cathode C = Collector TU = Shipped in Tubes Package Configuration 4-Pin DIP 4-Pin DIP 4-Pin DIP 4-Pin DIP 4-Pin DIP A K—C E A K, K A—C E A K—C E (Dar) A K—C E (Dar) A K—C E E = Emitter (Dar) = Photodarlington Example: OPIA817DTUE OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.5 8/09 Page 2 of 17 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com OPIA814, OPIA815, OPIA817 OPIA1210, OPIA4010 DIP Package Absolute Maximum Ratings (TA = 25o C unless otherwise noted) Storage Temperature Operating Temperature -55° C to +125° C -30° C to +100° C Isolation voltage (1 minute) Total Package Power Dissipation Lead Soldering Temperature (1/16” (1.6 mm) from case for 5 seconds with soldering iron) 5,000 Vrms 200 mW 260° C Input Diode Continuous Forward Current Peak Forward current (1 µs pulse width, 300 pps) Reverse Voltage OPIA817, OPIA815, OPIA4010, OPIA1210 OPIA814, OPIA4010 Power Dissipation 50 mA 1A 6V 70 mW Output Phototransistor Collector-Emitter Voltage OPIA817, OPIA814 OPIA4010 OPIA815 OPIA1210 Emitter-Collector Voltage OPIA817, OPIA814, OPIA815 OPIA4010 OPIA1210 Collector Current OPIA817, OPIA814, OPIA1210 OPIA4010 OPIA815 Power Dissipation All except the part numbers noted below OPIA4010 60 V 300 V 35 V 350 V 6V 0.1 V 7V 50 mA 150 mA 80 mA 150 mW 200 mW OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A.5 8/09 Page 3 of 17 OPIA814, OPIA815, OPIA817 OPIA1210, OPIA4010 DIP Package Electrical Characteristics SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS 1.0 1.2 1.2 1.4 1.3 V IF = 20 mA IF = 10 mA Input Diode VF Forward Voltage All except those noted below OPIA1210 VFM Peek Forward Voltage OPIA814, OPIA4010 OPIA1210 - - 3.5 3.0 V IFM = 500 mA IR Reverse Current All except those noted below OPIA814 OPIA1210 - - 10 10 µA VR = 4 V VR = 5 V Ct Terminal Capacitance All except those noted below OPIA815 - 30 30 250 pf V = 0.0 V, f = 1K Hz V = 0.0 V, f = 1K Hz Collector Dark Current OPIA817, OPIA814 OPIA1210 - 10 100 200 nA IF = 0 mA, VCE = 20 V IF = 0 mA, VCE = 300 V Collector-Emitter Saturation Voltage OPIA817 OPIA814 OPIA1210 - 0.1 0.1 - 0.2 0.3 0.4 V IF = 20 mA, IC = 1 mA IF = 20 mA, IC = 1 mA IF = 8 mA, IC = 2.4 mA fC Cutt-Off Frequency All except those noted below OPIA817, OPIA814, OPIA1210 - 80 - K Hz VCC = 5 V, IC = 2 mA, RL = 100 Ω tR Rise Time OPIA817 OPIA814 OPIA1210 - 4 5 2 18 20 - µs VCC = 2 V, IC = 2 mA, RL = 100 Ω VCC = 2 V, IC = 2 mA, RL = 100 Ω VCC = 10 V, IC = 2 mA, RL = 100 Ω tF Fall Time OPIA817D OPIA814 OPIA1210 - 3 4 3 18 20 - µs VCC = 2 V, IC = 2 mA, RL = 100 Ω VCC = 2 V, IC = 2 mA, RL = 100 Ω VCC = 10 V, IC = 2 mA, RL = 100 Ω Output Phototransistor ICEO VCE(SAT) Continued on Next Page OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.5 8/09 Page 4 of 17 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com OPIA814, OPIA815, OPIA817 OPIA1210, OPIA4010 DIP Package Electrical Characteristics - Continued from Previous Page SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS Collector Dark Current OPIA4010 OPIA815 - - 1.0 1.0 µA IF = 0 mA, VCE = 200 V IF = 0 mA, VCE = 10 V Collector-Emitter Saturation Voltage OPIA815 OPIA4010 - 0.8 - 1.0 1.5 V IF = 20 mA, IC = 5 mA IF = 20 mA, IC = 5 mA 1.0 - 6.0 7.0 - K Hz VCC = 2 V, IC = 20 mA, RL = 100 Ω VCC = 5 V, IC = 2 mA, RL = 100 Ω Output PhotoDarlington ICEO VCE(SAT) fC Cut-Off frequency OPIA815 OPIA4010 tr Rise Time OPIA815 OPIA4010 - 80 60 300 300 µs VCC = 2 V, IC = 20 mA, RL = 100 Ω VCC = 2 V, IC = 20 mA, RL = 100 Ω tf Fall Time OPIA815 OPIA4010 - 72 50 250 250 µs VCC = 2 V, IC = 20 mA, RL = 100 Ω VCC = 2 V, IC = 20 mA, RL = 100 Ω CTR Current Transfer Ratio OPIA817, OPIA1210 OPIA814 OPIA815 OPIA4010 50 60 70 600 - 600 600 9,000 % IF = 5.00 mA, VCE = 5.0 V IF = 1.00 mA, VCE = 2.0 V IF = 0.05 mA, VCE = 3.3 V IF = 1.00 mA, VCE = 2.0 V Cf Floating Capacitance - 0.6 1.0 pF V = 0.0 V, f = 1M Hz RISO Isolation Resistance 5X1010 1011 - ohm Coupled Characteristics C500V, 40% to 60%RH OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A.5 8/09 Page 5 of 17 OPIA814, OPIA815, OPIA817 OPIA1210, OPIA4010 DIP Package OPIA817 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.5 8/09 Page 6 of 17 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com OPIA814, OPIA815, OPIA817 OPIA1210, OPIA4010 DIP Package OPIA817 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A.5 8/09 Page 7 of 17 OPIA814, OPIA815, OPIA817 OPIA1210, OPIA4010 DIP Package OPIA814 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.5 8/09 Page 8 of 17 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com OPIA814, OPIA815, OPIA817 OPIA1210, OPIA4010 DIP Package OPIA814 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A.5 8/09 Page 9 of 17 OPIA814, OPIA815, OPIA817 OPIA1210, OPIA4010 DIP Package OPIA815 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.5 8/09 Page 10 of 17 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com OPIA814, OPIA815, OPIA817 OPIA1210, OPIA4010 DIP Package OPIA815 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A.5 8/09 Page 11 of 17 OPIA814, OPIA815, OPIA817 OPIA1210, OPIA4010 DIP Package OPI412 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.5 8/09 Page 12 of 17 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com OPIA814, OPIA815, OPIA817 OPIA1210, OPIA4010 DIP Package OPI412 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A.5 8/09 Page 13 of 17 OPIA814, OPIA815, OPIA817 OPIA1210, OPIA4010 DIP Package OPIA1210 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.5 8/09 Page 14 of 17 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com OPIA814, OPIA815, OPIA817 OPIA1210, OPIA4010 DIP Package OPIA1210 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A.5 8/09 Page 15 of 17 OPIA814, OPIA815, OPIA817 OPIA1210, OPIA4010 DIP Package Quality / Reliability Requirements Failure Criteria Conditions ± 10% 11 samples after 500Hrs 0 Fail @ VCE = 5.0VDC, Ta = 70°C ± 10% 50 samples after 96Hrs 0 Fail @ Max PD, Ta = 25°C MTTF @ 90% confidence 150,000 Min. @ 25°C, 25mADC Moisture Sensitivity Level MSL 1 per JDEC stnd J-STD-020B Lead Solderability 0 Fail per Method 208 of MIL-STD-202. 125°C Min. DSC test method Temperature Humidity-Bias ± 20% 85°C, 85%RH, 500Hrs, 80% min Iceo Temperature Cycle ± 20% per Method 1010.7 of MIL-STD-883E High Temperature Storage ± 20% 85°C, 500Hrs Autoclave 0 Fail TA = 121°C, Pressure = 15psi, Humidity = 100%, Time = 96Hrs Parameter HTRB D IC(OFF) HTFB D IC(ON) Glass Transition of body Note: This is to be performed when a change occurs to form, fit or function. Government and Industry Standard Compliance Requirements European Union’s Reduction of Hazardous Substances (RoHS) Directive 2002/95/EC Label Identification Carrollton, TX, USA MADE IN TAIWAN DESCRIPTION: Size: 3” (7.4 cm) X 2.2” (5.5 cm) Lettering shall be black on white background. Format shall be as: Notes: 1. The DATE CODE is a 4-digit code for date of manufacture where YY is the last two digits of the year, and WW is week number of manufacture. 2. The LOT I.D. is the manufacturing location lot identification where Y is the year of manufacture, NNNN is a sequential lot identifier, and DDD is the day of the year of manufacture. – or use equivalent label format. OPTEK P/N __OPIA817D-TU__ IIIIIIIIIIIIIIIIIIIII QTY. ________N/A_________ IIIIIIIIIIIIIIIIIIIII DATE CODE _____(YYWW)___ IIIIIIIIIIIIIIIIIIIII LOT I.D. ____(Y-NNNNDDD)__ IIIIIIIIIIIIIIIIIIIII OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.5 8/09 Page 16 of 17 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com OPIA814, OPIA815, OPIA817 OPIA1210, OPIA4010 DIP Package Packaging Information: Tube Packaging Specifications (TU): DIMENSIONS ARE IN: INCHES [MILLIMETERS] TOLERANCE: ± 0.008 INCHES [± 0.2 MILLIMETERS] Quantity: 4-pin: 100pcs/tube OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A.5 8/09 Page 17 of 17