OVLAS6CB8

Round Red LED Lamp (3mm) OVLAS6CB8 x x x x 65° viewing angle Diffused lens for uniform light output Available on tape or reel Red color (628nm) Product Photo Here The OVLAS6CB8 is designed for wide-angle, uniform light output. The industry standard leads have a stand-off making this package ideal for PC board process assembly. Applications x Indicators for Medical, Industrial, Consumer, and Office Equipment x Indicators for White Goods and Home Appliances x Interior and Exterior Architectural and Accent Lighting x Signs and Digital Information Displays, Video Screen Non-color and RGB Presentation x Automotive Backlighting and Indicators Part Number Material Emitted Color Intensity Typ. mcd Lens Color OVLAS6CB8 AlInGaP Red 1100 Water Clear RoHS OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Issue 1.0 0605 Page 1 Round Red LED Lamp (3mm) OVLAS6CB8 Absolute Maximum Ratings TA = 25oC unless otherwise noted Storage Temperature Range -40 ~ +100 °C Operating Temperature Range -40 ~ +95 °C Reverse Voltage 5V Continuous Forward Current 50 mA Peak Forward Current (10% Duty Cycle, 1KHz) 200 mA Power Dissipation 130 mW Lead Soldering Temperature (3mm from the base of the epoxy bulb) 1 260°C Note: 1. Solder time less than 3 seconds at temperature extreme. Electrical Characteristics TA = 25oC unless otherwise noted SYMBOL PARAMETER MIN TYP MAX UNITS CONDITIONS Iv Luminous Intensity 550 1100 ---- mcd IF = 20mA VF Forward Voltage ---- 2.3 2.6 V IF = 20mA IR Reverse Current ---- ---- 100 µA VR = 5V Dominant Wavelength 620 628 635 nm IF = 20mA 50% Power Angle ---- 65 ---- deg IF = 20mA D 2 ½H-H Luminous Intensity (mcd) Standard Bins (IF = 20mA) Lamps are sorted to luminous intensity (IV) and dominant wavelength ( D) bins shown. Orders for OVLAS6CB8 may be filled with any or all bins contained as below. 1520 1100 T 770 S 550 R 620 Dominant Wavelength (nm) Luminous intensity is at R bin or above. 635 Important Notes: 1. All ranks will be included per delivery, rank ratio will be based on the chip distribution. 2. To designate luminous intensity ranks, please contact OPTEK. 3. Pb content