OVLGJ0C3B9

High-Intensity Yellow-Green LED in Plastic T-1¾ Package OVLGJ0C3B9 x x x x Narrow Beam Angle High Luminous Intensity Water Clear Plastic Package Yellow-Green (575nm) Product Photo Here The OVLGJ0C3B9 is a high intensity AlInGaP LED mounted in a clear plastic T-1¾ package. The device incorporates an integral molded lens that enables a narrow beam angle and provides an even emission pattern. Designed to produce light over a wide range of drive currents, this LED is useful in applications requiring higher on-axis brightness than that achievable with standard lamps. Applications x Indoor/Outdoor Applications x Message Boards x Store Front Signage x Indicators RoHS Part Number Material Emitted Color Intensity Typ. mcd Lens Color OVLGJ0C3B9 AlInGaP Yellow-Green 2300 Water Clear 1 ANODE 2 CATHODE OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Issue 1.0 0505 Page 1 T-1¾ High-Intensity Yellow-Green LED OVLGJ0C3B9 Absolute Maximum Ratings TA = 25oC unless otherwise noted Storage Temperature Range -40 ~ +100 °C Operating Temperature Range -40 ~ +85 °C Lead Soldering Temperature (3mm from the base of the epoxy bulb) 1 260 °C Reverse Voltage 5V Continuous Forward Current 2 25 mA Peak Forward Current (10% Duty Cycle, 1KHz) 180 mA Power Dissipation 100 mW Note: 1. Solder time less than 5 seconds at temperature extreme. Electrical Characteristics TA = 25oC unless otherwise noted SYMBOL PARAMETER MIN TYP MAX Iv Luminous Intensity VF IR ---- 138 ---- 1500 2300 ---- Forward Voltage ---- 2.0 2.4 V IF = 20mA Reverse Current ---- ---- 10 µA VR = 5V P Peak Wavelength ---- 575 ---- nm IF = 20mA D Dominant Wavelength ---- 573 ---- nm IF = 20mA Spectral Bandwidth ---- 20 ---- nm IF = 20mA 50% Power Angle ---- 6 ---- deg IF = 20mA 2 ½H-H Issue 1.0 Page 2 0505 UNITS mcd CONDITIONS IF = 2mA IF = 20mA OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com T-1¾ High-Intensity Yellow-Green LED OVLGJ0C3B9 Typical Electro-Optical Characteristics Curves Half Power WL = 18nm % mA V Forward Current vs. Forward Voltage mA Relative Luminous Intensity vs. Wavelength % % mA Relative Luminous Intensity vs. Forward Current mA °C Relative Luminous Intensity vs. Ambient Temperature % °C Forward Current vs. Ambient Temperature Relative Intensity vs. Radiation Angle OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Issue 1.0 0505 Page 3 T-1¾ High-Intensity Yellow-Green LED OVLGJ0C3B9 Issue 1.0 Issue 1.0 Page 4 0505 Change Description Initial Release Approval Date J. Haynie 6/7/05 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com