High-Intensity LED in Plastic
T-1¾ Package
OVLGx0CyB9 Series
Features:
•
•
•
•
Narrow beam angle
High brightness LED
Water clear plastic package
UV resistant epoxy
Description:
Each device in the OVLG Series is a high intensity LED mounted in a clear plastic T-1¾ package. Each device incorporates an
integral molded lens that enables a narrow beam angle and provides an even emission pattern. Designed to produce light
over a wide range of drive currents, these LEDs are useful in applications that require a higher on-axis brightness than that
achievable with standard lamps.
Applications:
•
•
•
•
Indoor/outdoor applications
Variable message boards
Store front signage
Indicators
Part Number
OVLGB0C6B9
OVLGC0C6B9
OVLGS0C8B9
OVLGY0C9B9
Material
Emitted Color
Intensity Typ. mcd
Lens Color
Blue
Blue-Green
Red
Yellow
7,200
23,000
14,000
14,000
Clear
InGaN
AlInGaP
RoHS
General Note
TT Electronics reserves the right to make changes in product specification without
notice or liability. All information is subject to TT Electronics’ own data and is
considered accurate at time of going to print.
© TT electronics plc
DO NOT LOOK DIRECTLY AT LED
WITH UNSHIELDED EYES OR
DAMAGE TO RETINA MAY
OCCUR.
TT Electronics | OPTEK Technology
2900 E. Plano Pkwy, Plano, TX 75074 | Ph: +1 972 323 2200
www.ttelectronics.com | sensors@ttelectronics.com
Rev C 10/2015
Page 1
High-Intensity LED in Plastic
T-1¾ Package
OVLGx0CyB9 Series
Electrical Specifications
Absolute Maximum Ratings (TA = 25o C unless otherwise noted)
Storage Temperature Range
-40 ~ +100 °C
Operating Temperature Range
-40 ~ +100 °C
Reverse Voltage
5V
Blue, Blue-Green
Continuous Forward Current
25 mA
Red, Yellow
50 mA
Peak Forward Current (10% Duty Cycle, 1 kHz)
100 mA
Power Dissipation
Current Linearity vs Ambient Temperature
Blue, Blue-Green
100 mW
Red, Yellow
120 mW
Blue, Blue-Green
-0.29 mA/° C
Red, Yellow
-0.72 mA/° C
LED Junction Temperature
125° C
Electrostatic Discharge Classification (JEDEC-JESD22-A114F)
Class 1C
1
Lead Soldering Temperature (3 mm from the base of the epoxy bulb)
260° C / 5 seconds
Electrical Characteristics (TA = 25o C unless otherwise noted)
SYMBOL
PARAMETER
IV
Luminous Intensity
COLOR
MIN
TYP
MAX
Blue
4,360
7,200
----
Blue-Green
11,970
23,000
----
Red
8,550
14,000
----
Yellow
8,550
14,000
----
2.6
3.2
4.0
Blue
VF
Forward Voltage
Blue-Green
Red
1.8
2.0
2.4
----
----
10
Blue
460
470
475
Blue-Green
499
505
511
Red
620
623
630
Yellow
585
589
595
Blue
----
15
----
Blue-Green
----
15
----
Red
----
8
----
Yellow
----
8
----
Yellow
UNITS
CONDITIONS
mcd
IF = 20 mA
V
IF = 20 mA
µA
VR = 5 V
nm
IF = 20 mA
deg
IF = 20 mA
Blue
IR
Reverse Current
Blue-Green
Red
Yellow
λD
2Θ½H-H
Dominant Wavelength
50% Power Angle
General Note
TT Electronics reserves the right to make changes in product specification without
notice or liability. All information is subject to TT Electronics’ own data and is
considered accurate at time of going to print.
© TT electronics plc
TT Electronics | OPTEK Technology
2900 E. Plano Pkwy, Plano, TX 75074 | Ph: +1 972 323 2200
www.ttelectronics.com | sensors@ttelectronics.com
Rev C 10/2015
Page 2
High-Intensity LED in Plastic
T-1¾ Package
OVLGx0CyB9 Series
Typical Electro-Optical Characteristics Curves—Blue & Blue-Green
General Note
TT Electronics reserves the right to make changes in product specification without
notice or liability. All information is subject to TT Electronics’ own data and is
considered accurate at time of going to print.
© TT electronics plc
TT Electronics | OPTEK Technology
2900 E. Plano Pkwy, Plano, TX 75074 | Ph: +1 972 323 2200
www.ttelectronics.com | sensors@ttelectronics.com
Rev C 10/2015
Page 3
High-Intensity LED in Plastic
T-1¾ Package
OVLGx0CyB9 Series
Typical Electro-Optical Characteristics Curves—Red & Yellow
General Note
TT Electronics reserves the right to make changes in product specification without
notice or liability. All information is subject to TT Electronics’ own data and is
considered accurate at time of going to print.
© TT electronics plc
TT Electronics | OPTEK Technology
2900 E. Plano Pkwy, Plano, TX 75074 | Ph: +1 972 323 2200
www.ttelectronics.com | sensors@ttelectronics.com
Rev C 10/2015
Page 4
High-Intensity LED in Plastic
T-1¾ Package
OVLGx0CyB9 Series
Beam Angle:
Packaging: 500 pcs per anti-static bag with desiccant
Desiccant
Barcode Label
General Note
TT Electronics reserves the right to make changes in product specification without
notice or liability. All information is subject to TT Electronics’ own data and is
considered accurate at time of going to print.
© TT electronics plc
TT Electronics | OPTEK Technology
2900 E. Plano Pkwy, Plano, TX 75074 | Ph: +1 972 323 2200
www.ttelectronics.com | sensors@ttelectronics.com
Rev C 10/2015
Page 5
High-Intensity LED in Plastic
T-1¾ Package
OVLGx0CyB9 Series
Reliability Test
LED lamps are checked by reliability tests based on MIL standards.
1. Test Conditions, Acceptable Criteria & Results
Life Test
Operation Life Test
(OLT)
MIL-STD-750D
Method 1026.3
TA=25°C , IF=30mA *
1000 Hrs
100
0/1
Pass
High Temperature
Storage (HTS)
MIL-STD-750D
Method 1032.1
TA=100°C
1000 Hrs
100
0/1
Pass
Low Temperature
Storage (LTS)
MIL-STD-750D
Method 1032.1
TA=—40°C
1000 Hrs
100
0/1
Pass
Temp. & Humidity
with Bias (THB)
MIL-STD-750D
Method 103B
TA=85°C , Rh=85%
IF=20mA
500 Hrs
100
0/1
Pass
Thermal Shock Test
(TST)
MIL-STD-750D
Method 1056.1
0°C ~
2min
100°C
2min
100 cycles
100
0/1
Pass
Temperature Cycling
Test (TCT)
MIL-STD-750D
Method 1051.5
-40°C ~ 25°C ~ 100°C ~ 25°C
30min 5min 30min 5min
100 cycles
100
0/1
Pass
Solderability
MIL-STD-750D
Method 2026.4
235±5°C , 5 sec.
1 time
20
0/1
Pass
Resistance to
Soldering Heat
MIL-STD-750D
Method 2031.1
260±5°C , 5 sec.
1 time
20
0/1
Pass
Lead Integrity
MIL-STD-750D
Method 2036.3
Load 2.5N (0.25kgf)
0°~90°~0° , bend
3 times
20
0/1
Pass
Environmental Test
Test Item
Mechanical Test
Std. Test Method
Test Conditions
Duration Unit
Acc / Rej
Result
Criteria
Classification
Remark: ( * ) IF = 30mA for AllnGaP chip; IF = 20mA for InGan chip
( ** ) IF = 20mA for AllnGaP chip; IF = 10mA for InGan chip
2. Failure Criteria (TA = 25°C):
Test Item
Symbol
Test Conditions
Luminous Intensity
IV
IF = 20mA
Forward Voltage
VF
IF = 20mA
Criteria for Judgment
Min.
Max
LSLx0.7 **
USLx1.1 *
( * ) USL: Upper Standard Level, ( ** ) LSL: Lower Standard Level
General Note
TT Electronics reserves the right to make changes in product specification without
notice or liability. All information is subject to TT Electronics’ own data and is
considered accurate at time of going to print.
© TT electronics plc
TT Electronics | OPTEK Technology
2900 E. Plano Pkwy, Plano, TX 75074 | Ph: +1 972 323 2200
www.ttelectronics.com | sensors@ttelectronics.com
Rev C 10/2015
Page 6
很抱歉,暂时无法提供与“OVLGS0C8B9”相匹配的价格&库存,您可以联系我们找货
免费人工找货- 国内价格 香港价格
- 1+2.199391+0.27289
- 100+1.93202100+0.23972
- 500+1.75638500+0.21793
- 5000+1.668575000+0.20703
- 25000+1.5368425000+0.19069