OVLJBGD8

Oval Blue LED Lamp (4mm) OVLJBGD8 x x x x x High luminous intensity Defined spatial radiation Multiple viewing angles UV-resistant epoxy Precision optical performance Product Photo Here The OVLJBGD8 is designed for superior performance in outdoor environments. Its radiation pattern matches red (OVLJRGD8) and green (OVLJGGD8) devices in identical packages to create LED pixels for full-color video screens. Applications x Variable Message Signs x Indoor/Outdoor Advertising Signage x Traffic and Highway Signs x Full-Color Video Signs Part Number Material Emitted Color Intensity Typ. mcd Lens Color OVLJBGD8 InGaN Blue 300 Blue Diffused RoHS Data is subject to change without prior notice. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Issue 1.0 0505 Page 1 Oval Blue LED Lamp (4mm) OVLJBGD8 Absolute Maximum Ratings TA = 25o C unless otherwise noted Storage Temperature Range -40 ~ +100 °C Operating Temperature Range -40 ~ +95 °C Reverse Voltage 5V Continuous Forward Current 25 mA Peak Forward Current (10% Duty Cycle, 1KHz) 100 mA Power Dissipation 105 mW Lead Soldering Temperature (3mm from the base of the epoxy bulb) 1 260°C Note: 1. Solder time less than 3 seconds at temperature extreme. Electrical Characteristics TA = 25o C unless otherwise noted SYMBOL PARAMETER MIN TYP MAX UNITS CONDITIONS Iv Luminous Intensity 145 300 ---- mcd IF = 20mA VF Forward Voltage ---- 3.6 4.2 V IF = 20mA IR Reverse Current ---- ---- 100 µA VR = 5V Dominant Wavelength 465 470 475 nm IF = 20mA ---- 100 ---- deg IF = 20mA ---- 50 ---- deg IF = 20mA D 2 ½H-H 2 ½V-V 50% Power Angle Standard Bins (IF = 20mA) Luminous Intensity (mcd) Lamps are sorted to luminous intensity (IV) and dominant wavelength ( D) bins shown. Orders for OVLJBGD8 may be filled with any or all bins contained as below. 550 390 Q 280 P 200 N 145 M 465 470 475 Luminous intensity is at M bin or above. Dominant Wavelength (nm) Important Notes: 1. All ranks will be included per delivery, rank ratio will be based on the chip distribution. 2. To designate luminous intensity ranks, please contact OPTEK. 3. Pb content