OVSAGBC2R8

Green PLCC4 Surface Mount LED OVSAGBC2R8 • • • • • High intensity with low power consumption White PLCC4 packaged in 8 mm tape on 7” diameter reel Compatible with automatic placement equipment Dimensions: 3.5 x 2.8 x 1.95 mm 120° viewing angle Product Photo Here The OVSAGBC2R8 is designed for wide angle, uniform light output. Its internal reflector and colorless clear lens optimize luminous intensity and make it ideal for backlighting applications and for coupling with light guides. Applications • Traffic lights • Signal and symbol luminaire • Mono-color indicators • Backlighting (LCD, switches, displays, illuminated advertising) • Interior automotive lighting (instrumentation clusters) • Safety marker lights (steps, exit ways) RoHS Part Number Material Emitted Color Intensity Typ. mcd Lens Color OVSAGBC2R8 InGaN Green 700 Water Clear Moisture DIMENSIONS ARE IN: [MILLIMETERS] INCHES DO NOT LOOK DIRECTLY AT LED WITH UNSHIELDED EYES OR DAMAGE TO RETINA MAY OCCUR. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Issue A 04/06 Page 1 of 4 Green PLCC4 Surface Mount LED OVSAGBC2R8 Absolute Maximum Ratings TA = 25o C unless otherwise noted Storage Temperature Range -40 ~ +100° C Operating Temperature Range -40 ~ +100° C Junction Temperature Junction/Ambient 110° C 1 350° C/W Junction/Solder Point 200° C/W Reverse Voltage 5V Continuous Forward Current 30 mA Peak Forward Current (10% Duty Cycle, PW ≤ 100 µsec) 100 mA Power Dissipation 140 mW Note: 1. Rth test condition: Mounted on PC board FR 4 (pad size ≥16 mm2) Electrical Characteristics TA = 25o C unless otherwise noted SYMBOL PARAMETER MIN TYP MAX UNITS CONDITIONS IV Luminous Intensity 450 700 ---- mcd IF = 30 mA VF Forward Voltage ---- 3.9 4.6 V IF = 30 mA IR Reverse Current ---- ---- 10 µA VR = 5 V λD Dominant Wavelength 516 527 536 nm IF = 30 mA 2 Θ½ 50% Power Angle ---- 120 ---- deg IF = 30 mA Standard Bins (IF = 30 mA) Lamps are sorted to luminous intensity (IV) and dominant wavelength (λD) bins shown. Orders for OVSAGBC2R8 may be filled with any or all bins contained as below. Xa Xb Xc Xd Luminous Intensity (mcd) 1120 900 V2 710 V1 560 U2 450 U1 516 521 526 531 Luminous intensity is at U1 bin or above. 536 Dominant Wavelength (nm) Important Notes: 1. All ranks will be included per delivery, rank ratio will be based on the chip distribution. 2. To designate luminous intensity ranks, please contact OPTEK. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A 04/06 Page 2 of 4 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Green PLCC4 Surface Mount LED OVSAGBC2R8 Typical Electro-Optical Characteristics Curves mA % V Forward Current vs Forward Voltage mA Relative Luminous Intensity vs Forward Current Half Power ∆ WL = 38 nm Rth j-s=200°C/W mA Rth j-a=350°C/W °C nm Relative Luminous Intensity vs Wavelength Maximum Forward DC Current vs Ambient Temperature v 50% Power Angle: 120° µA Spatial Distribution Reverse Current vs. Reverse Voltage OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Issue A 04/06 Page 3 of 4 Green PLCC4 Surface Mount LED OVSAGBC2R8 Reel Dimensions: 7-inch reel Carrier Tape Dimensions: Loaded quantity 2000 pieces per reel Moisture Resistant Packaging Label Aluminum Moisture-proof Bag Desiccant Bar Code Label OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A 04/06 Page 4 of 4 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com