OVSAQBLCR8

Red-Orange Top-View Surface Mount LED with Domed Lens OVSAQBLCR8 x x x x x x x High intensity with low power consumption White PLCC4 package with clear domed lens Wide viewing angle Packaged in 8 mm tape on 7” diameter reel Compatible with automatic placement equipment Compatible with infrared and vapor phase reflow solder process Red-orange (618 nm) Product Photo Here The OVSAQBLCR8 is designed for wide angle, uniform light output. Its internal reflector and colorless clear lens optimize luminous intensity and make it ideal for backlighting applications and for coupling with light guides. Applications x Traffic lights x Signal and symbol luminaire x Mono-color indicators x Backlighting (LCD, switches, displays and illuminated advertising) x Interior automotive lighting (instrumentation clusters) x Safety marker lights (steps, exit ways) RoHS Part Number Material Emitted Color Intensity/Flux Typ. Lens Color OVSAQBLCR8 AlInGaP Red-Orange 2800mcd / 3300mlm Water Clear Moisture 1, 2, 3 CATHODE 4 ANODE DIMENSIONS ARE IN INCHES AND [MILLIMETERS]. DO NOT LOOK DIRECTLY AT LED WITH UNSHIELDED EYES OR DAMAGE TO RETINA MAY OCCUR. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Issue A 04/06 Page 1 of 4 Red-Orange Top-View SMD LED with Domed Lens OVSAQBLCR8 Absolute Maximum Ratings TA = 25o C unless otherwise noted Storage Temperature Range -40 ~ +100° C Operating Temperature Range -40 ~ +100° C Junction Temperature Junction/Ambient 110° C 1 300° C/W Junction/Solder Point 150° C/W Reverse Voltage 5V Continuous Forward Current 70 mA Peak Forward Current (10% Duty Cycle, PW ”—VHF 200 mA Power Dissipation 225 mW Note: 1. Rth test condition: Mounted on PC board FR4 (pad size 
 2 ) Electrical Characteristics TA = 25o C unless otherwise noted MIN TYP MAX UNITS CONDITIONS Luminous Intensity 1800 2800 ---- mcd IF = 50 mA v Luminous Flux ---- 3300 ---- mlm IF = 50 mA VF Forward Voltage ---- 2.5 3.2 V IF = 50 mA IR Reverse Current ---- ---- 10 µA VR = 5V Dominant Wavelength 612 618 625 nm IF = 50 mA 50% Power Angle ---- 60 ---- deg IF = 50 mA SYMBOL IV D 2 ½ PARAMETER Luminous Intensity (mcd) Standard Bins (IF = 50 mA) Lamps are sorted to luminous intensity (IV) and dominant wavelength ( D) bins shown. Orders for OVSAQBLCR8 may be filled with any or all bins contained as below. 4500 3550 Y2 2800 Y1 2240 X2 1800 X1 612 625 Luminous intensity is at X1 bin or above. Dominant Wavelength (nm) Important Notes: 1. All ranks will be included per delivery, rank ratio will be based on the chip distribution. 2. To designate luminous intensity ranks, please contact OPTEK. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A 04/06 Page 2 of 4 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Red-Orange Top-View SMD LED with Domed Lens OVSAQBLCR8 Typical Electro-Optical Characteristics Curves mA % V Forward Current vs Forward Voltage Half Power mA Relative Luminous Intensity vs Forward Current WL = 23 nm mA nm Relative Luminous Intensity vs Wavelength °C Maximum Forward DC Current vs Ambient Temperature 50% Power Angle: 60° v A Spatial Distribution Reverse Current vs Reverse Voltage OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Issue A 04/06 Page 3 of 4 Red-Orange Top-View SMD LED with Domed Lens OVSAQBLCR8 Reel Dimensions: 7-inch reel Carrier Tape Dimensions: Loaded quantity 700 pieces per reel Moisture Resistant Packaging Label Aluminum Moisture-proof Bag Desiccant Bar Code Label OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A 04/06 Page 4 of 4 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com