Full Color PLCC4 LED
OVSARGB4R8
•
•
•
•
•
Surface mount device packaged in 8 mm tape on 7” diameter reel
Compatible with automatic placement equipment
Compatible with infrared and vapor phase reflow solder
Dimensions: 3.5 x 2.8 x 1.9 mm
120° viewing angle
Product Photo Here
The OVSARGB4R8 provides full color light output from a single package, 3-die design. This surface mount
package is an efficient solution in modular applications that require uniform brightness and color-on-demand.
Light output is optimized by an interior reflector and the wide viewing angle adds flexibility for applications ranging
from hand-held appliances to automotive interiors.
Applications
• RGB full-color indoor and outdoor displays
• Backlighting
• Coupling into light guides
• Automotive interiors
• Entertainment equipment
Part Number
OVSARGB4R8
Type
R
G
B
Material
AlInGaP
InGaN
InGaN
Chip
Emitted Color
Red
Green
Blue
Intensity Typ. mcd
550
850
320
Lens Color
Diffused
5a
RoHS
Moisture
DO NOT LOOK DIRECTLY
AT LED WITH UNSHIELDED
EYES OR DAMAGE TO
RETINA MAY OCCUR.
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com
Issue C 12/2011
Page 1 of 7
Full-Color PLCC4 LED
OVSARGB4R8
Absolute Maximum Ratings
TA = 25o C unless otherwise noted
RATING
PARAMETER
UNIT
R
G
B
Storage Temperature
-40 ~ +100
°C
Operating Temperature
-40 ~ +100
°C
Reverse Voltage
5
V
Continuous Forward Current (1 chip on)
50
25
25
mA
Peak Forward Current (10% Duty Cycle, PW ≤ 100 µsec, 1 chip on)
200
100
100
mA
Power Dissipation
130
100
100
mW
Junction Temperature
110
110
110
°C
Junction/ambient (1 chip on)
450
400
450
°C/W
Junction/ambient (3 chips on)
650
580
680
°C/W
Junction/solder point (1 chip on)
300
280
300
°C/W
Junction/solder point (3 chips on)
450
430
480
°C/W
Electrostatic Discharge Classification (JEDEC-JESD22-A114F)
Class 1C
Moisture Sensitivity Level (IPC/JEDEC J-STD-020C)
5a / 24 Hrs
Electrical Characteristics
TA = 25o C unless otherwise noted
VALUES
SYMBOL
IV
VF
PARAMETER
R
G
B
Min
355
560
180
Typ
550
850
320
Typ
2.0
3.2
3.2
Max
2.6
4.0
4.0
Luminous Intensity
Forward Voltage
UNIT
CONDITIONS
mcd
IF = 20 mA
V
IF = 20 mA
IR
Reverse Current (max)
10
10
10
µA
VR = 5 V
λD
Dominant Wavelength
619-624
520–540
460–480
nm
IF = 20 mA
λP
Wavelength at Peak Emission
630
527
470
nm
IF = 20 mA
2 Θ½
50% Power Angle
120
120
120
deg
IF = 20 mA
∆λ
Spectral Radiation Bandwidth
24
38
28
nm
IF = 20 mA
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue C 12/2011
Page 2 of 7
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com
Full-Color PLCC4 LED
OVSARGB4R8
Standard Bins
LEDs are sorted to luminous intensity (IV) and dominant wavelength (nm) bins shown. Each reel consists of a
single intensity bin and a single color bin. Orders are filled using all intensity and color bins listed in the following
tables. Optek will not accept orders for single intensity bins or single color bins.
Luminous Intensity (IV ) @ 20mA
RED
Code
Min (mcd)
GREEN
Max (mcd)
Code
Min (mcd)
BLUE
Max (mcd)
Code
Min (mcd)
Max (mcd)
H
355
450
K
560
710
E
180
224
J
450
560
M
710
900
F
224
280
K
560
710
N
900
1120
G
280
355
Dominant Wavelength (nm)
RED
Code
RB
Min (nm)
619
BLUE
GREEN
Max (nm)
624
Code
Min (nm)
Max (nm)
Code
Min (nm)
Max (nm)
G7
520
525
B3
460
465
G8
525
530
B4
465
470
G9
530
535
B5
470
475
Ga
535
540
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com
Issue C 12/2011
Page 3 of 7
Full-Color PLCC4 LED
OVSARGB4R8
Typical Electro-Optical Characteristics Curves
Relative Intensity vs Dominant Wavelength
Forward Current vs Forward Voltage
Relative Luminous Intensity vs Forward Current
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue C 12/2011
Page 4 of 7
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com
Full-Color PLCC4 LED
OVSARGB4R8
Typical Electro-Optical Characteristics Curves
Maximum Forward DC Current vs Solder Point Temperature
Maximum Forward DC Current vs Ambient Temperature
50% Power Angle: 120°
Far Field Pattern
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com
Issue C 12/2011
Page 5 of 7
Full-Color PLCC4 LED
OVSARGB4R8
Reflow Solder Profile
Manual soldering by soldering iron:
•
•
•
•
•
The use of a soldering iron of less than 25 W is recommended. The temperature of the iron must be kept at
below 315°C with soldering time within 2 seconds
The epoxy resin of the SMD LED should not contact the tip of the soldering iron.
No mechanical stress should be exerted on the resin portion of the SMD LED during soldering.
Handling of the SMD LED should be done when the package has been cooled down to below 40°C or less.
This is to prevent LED failures due to thermal-mechanical stress during handling.
The temperature (top surface of the SMD LED) profile is as below:
Solder = Lead-Free
Average ramp-up rate = 4°C / sec. max
Preheat temperature: 150 - 200°C
Preheat time: 120 sec. max.
Ramp-down rate = 6°C / sec. max.
Peak temperature = 250°C max.
Time within 5°C of actual peak temperature = 10 sec .
Duration above 217°C is 60 sec. max
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue C 12/2011
Page 6 of 7
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com
Full-Color PLCC4 LED
OVSARGB4R8
Reel Dimensions: 7-inch reel
Carrier Tape Dimensions: Loaded quantity 500 pieces per reel
Moisture Resistant Packaging
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com
Issue C 12/2011
Page 7 of 7
很抱歉,暂时无法提供与“OVSARGB4R8”相匹配的价格&库存,您可以联系我们找货
免费人工找货