OVSASBC2R8

Red PLCC4 Surface Mount LED OVSASBC2R8 x x x x x High intensity with low power consumption White PLCC4 packaged in 8 mm tape on 7” diameter reel Compatible with automatic placement equipment Dimensions: 3.5 x 2.8 x 1.95 mm 120° viewing angle Product Photo Here The OVSASBC2R8 is designed for wide angle, uniform light output. Its internal reflector and colorless clear lens optimize luminous intensity and make it ideal for backlighting applications and for coupling with light guides. Applications x Traffic lights x Signal and symbol luminaire x Mono-color indicators x Backlighting (LCD, switches, displays and illuminated advertising) x Interior automotive lighting (instrumentation clusters) x Safety marker lights (steps, exit ways) RoHS Part Number Material Emitted Color Intensity Typ. mcd Lens Color OVSASBC2R8 AlInGaP Red 900 Water Clear Moisture DO NOT LOOK DIRECTLY AT LED WITH UNSHIELDED EYES OR DAMAGE TO RETINA MAY OCCUR. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Issue A 04/06 Page 1 of 4 Red PLCC4 Surface Mount LED OVSASBC2R8 Absolute Maximum Ratings TA = 25o C unless otherwise noted Storage Temperature Range -40 ~ +100° C Operating Temperature Range -40 ~ +100° C Junction Temperature 110° C Reverse Voltage 5V Continuous Forward Current 70 mA Peak Forward Current (10% Duty Cycle, PW ”—VHF 200 mA Power Dissipation 225 mW Electrical Characteristics TA = 25o C unless otherwise noted SYMBOL MIN TYP MAX UNITS CONDITIONS IV Luminous Intensity 560 900 ---- mcd IF = 50 mA VF Forward Voltage ---- 2.5 3.2 V IF = 50 mA IR Reverse Current ---- ---- 10 µA VR = 5 V Dominant Wavelength 620 628 635 nm IF = 50 mA 50% Power Angle ---- 120 ---- deg IF = 50 mA D 2 PARAMETER ½ Standard Bins (IF = 50 mA) Lamps are sorted to luminous intensity (IV) and dominant wavelength ( D) bins shown. Orders for OVSASBC2R8 may be filled with any or all bins contained as below. Luminous Intensity (mcd) 1400 1120 W1 900 V2 710 V1 560 U2 620 628 635 Luminous intensity is at U2 bin or above. Dominant Wavelength (nm) Notes: 1. All ranks will be included per delivery, rank ratio will be based on the chip distribution. 2. To designate luminous intensity ranks, please contact OPTEK. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A 04/06 Page 2 of 4 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Red PLCC4 Surface Mount LED OVSASBC2R8 Typical Electro-Optical Characteristics Curves % mA V Forward Current vs Forward Voltage Half Power mA Relative Luminous Intensity vs Forward Current WL = 23 nm Rth j-s=200°C/W mA Rth j-a=350°C/W °C nm Relative Luminous Intensity vs Wavelength Maximum Forward DC Current vs Ambient Temperature v 50% Power Angle: 120° A Spatial Distribution Reverse Current vs Reverse Voltage OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Issue A 04/06 Page 3 of 4 Red PLCC4 Surface Mount LED OVSASBC2R8 Reel Dimensions: 7-inch reel Carrier Tape Dimensions: Loaded quantity 2000 pieces per reel Moisture Resistant Packaging Label Aluminum Moisture-proof Bag Desiccant Bar Code Label OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A 04/06 Page 4 of 4 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com