OVSASBLCR8

Red Top-View Surface Mount LED with Domed Lens OVSASBLCR8 • • • • • • • High intensity with low power consumption White PLCC4 package with clear domed lens Wide viewing angle Packaged in 8 mm tape on 7” diameter reel Compatible with automatic placement equipment Compatible with infrared and vapor phase reflow solder process Red (628 nm) Product Photo Here The OVSASBLCR8 is designed for focused, uniform light output. Its internal reflector and colorless clear lens optimize luminous intensity and make it ideal for backlighting applications and for coupling with light guides. Applications • Traffic lights • Signal and symbol luminaire • Mono-color indicators • Backlighting (LCD, switches, displays, illuminated advertising) • Interior automotive lighting (instrumentation clusters) • Safety marker lights (steps, exit ways) Part Number Material Emitted Color Intensity Typ. mcd Luminous Flux Typ. mlm Lens Color OVSASBLCR8 AlInGaP Red 2200 2550 Water Clear RoHS Moisture 1, 2, 3 CATHODE 4 ANODE [MILLIMETERS] DIMENSIONS ARE IN: INCHES DO NOT LOOK DIRECTLY AT LED WITH UNSHIELDED EYES OR DAMAGE TO RETINA MAY OCCUR. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Issue A.1 04/07 Page 1 of 4 Red Top-View SMD LED with Domed Lens OVSASBLCR8 Absolute Maximum Ratings TA = 25o C unless otherwise noted Storage Temperature Range -40 ~ +100° C Operating Temperature Range -40 ~ +100° C Junction Temperature 110° C Reverse Voltage 5V Continuous Forward Current 70 mA Peak Forward Current (10% Duty Cycle, PW ≤ 100 µsec) 200 mA Power Dissipation 225 mW Electrical Characteristics TA = 25o C unless otherwise noted SYMBOL PARAMETER MIN TYP MAX UNITS CONDITIONS IV Luminous Intensity 1400 2200 3550 mcd IF = 50 mA ΦV Luminous Flux ---- 2550 ---- mlm IF = 50 mA VF Forward Voltage ---- 2.5 3.2 V IF = 50 mA IR Reverse Current ---- ---- 10 µA VR = 5 V λD Dominant Wavelength 620 628 635 nm IF = 50 mA 2 Θ½ 50% Power Angle ---- 60 ---- deg IF = 50 mA Standard Bins (IF = 50 mA) Lamps are sorted to luminous intensity (IV) and dominant wavelength (λD) bins shown. Orders for OVSASBLCR8 may be filled with any or all bins contained as below. Luminous Intensity (mcd) 3500 Y1 2800 X2 2240 X1 1800 W2 1400 620 628 635 Dominant Wavelength (nm) Notes: 1. All ranks will be included per delivery. Rank ratio will be based on the chip distribution. 2. To designate luminous intensity ranks, please contact OPTEK. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.1 04/07 Page 2 of 4 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Red Top-View SMD LED with Domed Lens OVSASBLCR8 Typical Electro-Optical Characteristics Curves % mA V mA Forward Current vs Forward Voltage Relative Luminous Intensity vs Forward Current Half Power ∆ WL = 23 nm 100 75 mA %% 50 25 0 400 500 600 700 800 °C nm Relative Luminous Intensity vs Wavelength Maximum Forward DC Current vs Ambient Temperature 50% Power Angle: 60° V µA Spatial Distribution Reverse Current vs Reverse Voltage OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Issue A.1 04/07 Page 3 of 4 Red Top-View SMD LED with Domed Lens OVSASBLCR8 Reel Dimensions: 7-inch reel Carrier Tape Dimensions: Loaded quantity 700 pieces per reel Moisture Resistant Packaging Label Aluminum Moisture-proof Bag Desiccant Bar Code Label OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.1 04/07 Page 4 of 4 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Red Top-View SMD LED with Domed Lens OVSASBLCR8 Issue Change Description Approval Date 1.0 Initial Release J. Haynie 07/29/05 1.1 On page 2, changed 50% power angle from 120 to 60 degrees. J. Haynie 08/31/05 A A.1 Added warning symbols on page 1. Added new company disclaimer and footer. Added new logo and email. Corrected typical intensity and added typical flux, page 1. Corrected typical intensity, added typical flux, and replaced binning graph, page 2. Replaced graph of relative luminous intensity vs wavelength and graph of spatial distribution, page 3 04/24/06 J. Haynie 04/30/07 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Issue A.1 04/07 Page 5 of 4