OVSPW1BCR44

1-Watt SMD 6x6mm With Dome Lens OVSPxBCR44 Series • • • • Robust energy-efficient design with long operating life Low thermal resistance Medium beam angle High luminous intensity Applications • Automotive interior lighting • Architectural indoor and outdoor lighting • Electronic signs and signals Part Number Beam Angle Emitted Color Typ. Dominant Wavelength (nm) Typ. Luminous Intensity (mcd) Lens Color OVSPBBCR44 OVSPGBCR44 OVSPRBCR44 OVSPW1BCR44 OVSPYBCR44 45° 40° 40° 70° 40° Blue Green Red White Yellow 460 528 625 N/A 591 18,000 67,500 56,000 54,000 45,000 Clear 2a Blue RoHS Moisture Green, Red, Yellow White Pin 1 Pin 2 Pin 1 Pin 2 Cathode Anode Anode Cathode DO NOT LOOK DIRECTLY AT LED WITH UNSHIELDED EYES OR DAMAGE TO RETINA MAY OCCUR. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue B 11/2011 Page 1 of 11 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com 1-Watt SMD 6x6mm Dome Lens OVSPxBCR44 Series Absolute Maximum Ratings (TA = 25o C unless otherwise noted) Storage Temperature Range -40 ~ +100 °C Operating Temperature Range -40 ~ +100 °C Blue, White Reverse Voltage Not designed for reverse bias Green 5V Red, Yellow Continuous Forward Current Peak Forward Current (10% Duty Cycle, 1 kHz) 12V Blue, Green, White 350 mA Red, Yellow 400 mA Blue, Green 1000 mA Red, Yellow, White 500 mA Power Dissipation 1200 mW LED Junction Temperature Blue, Green 120°C Red, Yellow, White 125°C Electrostatic Discharge Classification (JEDEC-JESD22-A114F) Class 2 Moisture Sensitivity Level (IPC/JEDEC J-STD-020C) 2a / 672 Hrs Lead Soldering Temperature (3 mm from the base of the epoxy bulb) 260° C / 5 seconds Electrical Characteristics (TA = 25o C unless otherwise noted) SYMBOL IV VF λD PARAMETER COLOR Luminous Intensity MIN TYP MAX Blue 11,250 18,000 22,400 Green 45,000 67,500 90,000 Red 35,500 56,000 71,500 Yellow 35,500 45,000 56,000 3.0 3.6 4.0 Blue, Green Forward Voltage Dominant Wavelength Red, Yellow 2.2 2.5 2.8 Blue 455 460 465 Green 520 528 535 Red 620 625 630 Yellow 585 591 597 Blue 2Θ½H-H 50% Power Angle Green Red UNITS CONDITIONS IF = 350 mA mcd IF = 400 mA V IF = 350 mA IF = 400 mA IF = 350 mA nm IF = 400 mA 45 ---- Yellow 40 40 ---- deg 40 Electrical Characteristics—White (IF = 350 mA, TJ = 25° C) SYMBOL PARAMETER MIN TYP MAX UNITS VF Forward Voltage 3.0 3.5 4.0 V Φ Luminous Flux ---- 62 ---- lm IV Luminous Intensity 45,000 56,000 71,500 mcd 2 Θ½ 50% Power Angle ---- 70 ---- deg OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue B 11/2011 Page 2 of 11 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com 1-Watt SMD 6x6mm Dome Lens OVSPxBCR44 Series Standard Bins LEds are sorted to the luminous intensity (IV) and dominant wavelength (nm) codes listed below. Each reel consists of a single intensity code and a single color code. Orders are filled utilizing all of the intensity codes and color codes listed in the following tables. Optek will not accept orders for single intensity codes or single color codes. Luminous Intensity (IV) @ 350mA Luminous Intensity (IV ) @ 400mA Red: Code Blue: OVSPRBCR44 Min (mcd) OVSPBBCR44 Max (mcd) Code Min (mcd) Max (mcd) AH 35,500 45,000 AC 11,250 14,000 AJ 45,000 56,000 AD 14,000 18,000 AK 56,000 71,500 AE 18,000 22,400 Green: OVSPGBCR44 Yellow: OVSPYBCR44 Code Min (mcd) Max (mcd) Code AH 35,500 45,000 AJ 45,000 56,000 AJ 45,000 56,000 AK 56,000 71,500 AK 56,000 71,500 AL 71,500 90,000 Red: OVSPRBCR44 Full 620 - 630 nm Dominant Wavelength (nm) Min (mcd) Max (mcd) Blue: OVSPBBCR44 A 455 - 460 nm B 460 - 465 nm Yellow: OVSPYBCR44 A 585 - 588 nm B 588 - 591 nm C 591 - 594 nm D 594 - 597 nm Green: OVSPGBCR44 AO 520 - 525 nm A 525 - 530 nm B 530 - 535 nm OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue B 11/2011 Page 3 of 11 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com 1-Watt SMD 6x6mm Dome Lens OVSPxBCR44 Series Standard Bins LEds are sorted to the luminous intensity (IV) and CCT codes listed below. Each reel consists of a single intensity code and a single CCT code. Orders are filled utilizing all of the intensity codes and CCT codes listed in the following tables. Optek will not accept orders for single intensity codes or single CCT codes. Chromaticity Coordinates (x, y) Rank YU YL Cx 0.274 0.283 0.307 0.303 0.283 0.290 0.310 0.307 Cy 0.301 0.284 0.316 0.333 0.284 0.270 0.299 0.316 Rank XU XL IV Luminous Intensity Bin Min (mcd) Max (mcd) Cx 0.303 0.307 0.317 0.315 0.307 0.310 0.319 0.317 AJ 45,000 56,000 Cy 0.333 0.316 0.325 0.343 0.316 0.299 0.310 0.325 AK 56,000 71,500 Rank WU WL Cx 0.315 0.317 0.329 0.329 0.317 0.319 0.329 0.329 Cy 0.343 0.325 0.336 0.354 0.325 0.310 0.319 0.336 Rank VU VL Cx 0.329 0.329 0.345 0.347 0.329 0.329 0.343 0.345 Cy 0.354 0.336 0.350 0.368 0.336 0.319 0.331 0.350 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue B 11/2011 Page 4 of 11 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com 1-Watt SMD 6x6mm Dome Lens OVSPxBCR44 Series Typical Electro-Optical Characteristics Curves - White OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue B 11/2011 Page 5 of 11 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com 1-Watt SMD 6x6mm Dome Lens OVSPxBCR44 Series Typical Electro-Optical Characteristics Curves - Blue OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue B 11/2011 Page 6 of 11 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com 1-Watt SMD 6x6mm Dome Lens OVSPxBCR44 Series Typical Electro-Optical Characteristics Curves - Green OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue B 11/2011 Page 7 of 11 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com 1-Watt SMD 6x6mm Dome Lens OVSPxBCR44 Series Typical Electro-Optical Characteristics Curves - Red & Yellow OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue B 11/2011 Page 8 of 11 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com 1-Watt SMD 6x6mm Dome Lens OVSPxBCR44 Series Recommended SN-Pb IR-Reflow Soldering Profile Recommended PB-free Soldering Profile OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue B 11/2011 Page 9 of 11 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com 1-Watt SMD 6x6mm Dome Lens OVSPxBCR44 Series Solder Pad Design Metal core circuit board (MCPCB) is highly recommended for high density applications. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue B 11/2011 Page 10 of 11 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com 1-Watt SMD 6x6mm Dome Lens OVSPxBCR44 Series Reel Dimensions: 13-inch reel Carrier Tape Dimensions: Loaded quantity 1000 pcs per reel Moisture Resistant Packaging OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue B 11/2011 Page 11 of 11 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com