OVTL01LGARS

Lednium Series Optimal I Flush Mount and Surface Mount Packages OVTL01LGAx Series • • • • Robust energy-efficient design with long operating life Low thermal resistance (2° C/W) Exceptional spatial uniformity Available in amber, blue, cyan, green, red, cool white, daylight white, and warm white Product Photo Here The OVTL01LGAx Series offers an energy-efficient packaged LED source providing high luminance, low thermal resistance, a water-clear lens, and a long operating lifespan. Devices have a 135° typical viewing angle with optional optics available and two mounting options: 1. Flush Mount—The shallow-gullwing package is designed to be countersunk into a hole or cavity in the PC board for a low profile of only 1.12mm. 2. Surface Mount—The deep-gullwing package is easily mounted on the solid surface of the PC board (Part numbers end in “S”) Applications • Automotive exterior and interior lighting • Architectural lighting • Electronic signs and signals OVTL01LGAA Amber Typical Luminous Flux (lm) 35 OVTL01LGAB Blue 12 Flush Mount OVTL01LGAC Cyan 40 Flush Mount OVTL01LGAG Green 60 Flush Mount OVTL01LGAR Red 45 Flush Mount OVTL01LGAW Cool White 65 Flush Mount OVTL01LGAWD Daylight White 60 Flush Mount Warm White 50 Flush Mount Amber 35 Surface Mount OVTL01LGABS Blue 12 Surface Mount OVTL01LGACS Cyan 40 Surface Mount OVTL01LGAGS Green 60 Surface Mount OVTL01LGARS Red 45 Surface Mount OVTL01LGAWS Cool White 65 Surface Mount OVTL01LGAWDS Daylight White 60 Surface Mount OVTL01LGAWWS Warm White 50 Surface Mount Part Number Viewing Angle OVTL01LGAWW 135° OVTL01LGAAS Emitted Color 3 RoHS Moisture Package Flush Mount DO NOT LOOK DIRECTLY AT LED WITH UNSHIELDED EYES OR DAMAGE TO RETINA MAY OCCUR. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Issue B.8 3/09 Page 1 of 10 Lednium Series Optimal I OVTL01LGA Series Package Drawing: FLUSH MOUNT Recommended Solder Pattern SURFACE MOUNT Recommended Solder Pattern CATHODE R1.50 0.90 2.20 2.90 1. 2. 3. Recommend .006 [.015] thick stencil. Cross-hatching represents solder paste positioning Dimensions are in inches [mm] 2.90 ANODE OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue B.8 3/09 Page 2 of 10 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Lednium Series Optimal I OVTL01LGA Series Absolute Maximum Ratings DC Forward Current 0.35 A Peak Pulsed Forward Current 1 1A Reverse Voltage 5V Maximum Allowable Junction Temperature 2 130° C Storage and Operating Temperature -50° ~ +85 ° C Notes: 1. Pulse width 1 ms maximum. Duty cycle 1/16. 2. Thermal Resistance junction to Board (Tjb) is 2° C/W, see Application Bulletin 238 Electrical Characteristics (IF = 350 mA, TJ = 25° C) PARAMETER MIN TYP MAX UNITS Forward Voltage (Amber) 1.9 2.3 2.6 V Forward Voltage (Blue) 2.9 3.4 3.7 V Forward Voltage (Cyan & Green) 2.9 3.4 3.7 V Forward Voltage (Red) 1.9 2.3 2.6 V SYMBOL VF Forward Voltage (White) 2.9 3.4 3.7 V VF—Temperature Co-efficient (Amber & Red) ---- -6.0 ---- mV/°C VF—Temperature Co-efficient (White & Blue) ---- -4.8 ---- mV/°C VF—Temperature Co-efficient (Cyan & Green) ---- -5.0 ---- mV/°C Optical Characteristics (IF = 350 mA, TJ = 25° C) COLOR DOMINANT WAVELENGTH SPECTRAL FULL-WIDTH HALF-MAXIMUM DOMINANT WAVELENGTH TEMPERATURE DEPENDENCE MIN TYP MAX Amber 590 595 600 16 nm 0.08 nm/° C Blue 455 460 465 24 nm 0.05 nm/° C Cyan 500 505 510 37nm 0.04 nm/° C Green 510 515 520 40 nm 0.04 nm/° C Red 620 625 630 18 nm 0.05 nm/° C Color Minimum CCT (°K) Maximum CCT (°K) Cool White 6400 7600 Daylight White 5200 6400 Warm White 3200 3800 Chromaticity Coordinates Cx .298 .304 .316 .313 Cy .314 .297 .318 .34 Cx .313 .317 .336 .338 Cy .341 .313 .345 .382 Cx .388 .403 .440 .419 Cy .375 .424 .440 .391 OPTEK’s Lednium Series Solid State Lighting products package the highest quality LED chips. Typically, the lumen output of these can be as high as 70% after 50,000 hours of operation. This prediction is based on specific test results and on tests on similar materials, and relies on strict observation of the design limits and ratings included in this data sheet. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Issue B.8 3/09 Page 3 of 10 Lednium Series Optimal I OVTL01LGA Series Standard Bins Lamps are sorted to luminous flux (Φ) and forward voltage (VF) bins shown. Orders may be filled with any or all bins contained as below. OVTL01LGAA and OVTL01LGAAS (AMBER) (IF = 350 mA) Luminous flux (lm) Dominant Wavelength 590-600nm V1 45 40 35 30 V2 A3V1 A3V2 A3 A2V1 A2V2 A2 A1V2 A1 A1V1 2.3 1.9 2.6 Forward Voltage (VF) OVTL01LGAB and OVTL01LGABS (BLUE) (IF = 350 mA) Luminous flux (lm) Dominant Wavelength 455-465nm V3 20 15 10 V4 B2V3 B2V4 B2 B1V3 B1V4 B1 2.9 3.4 3.7 Forward Voltage (VF) Luminous flux (lm) OVTL01LGAC and OVTL01LGACS (CYAN) (IF = 350 mA) Dominant Wavelength 500-510nm V3 50 40 30 V4 T2V3 T2V4 T1V3 T1V4 3.4 2.9 T2 T1 3.7 Forward Voltage (VF) OVTL01LGAG and OVTL01LGAGS (GREEN) (IF = 350 mA) Luminous flux (lm) Dominant Wavelength 510-520nm V3 70 60 50 V4 G2V3 G2V4 G2 G1V3 G1V4 G1 G0V3 G0V4 G0 40 2.9 3.4 3.7 Forward Voltage (VF) Important Notes: 1. All ranks will be included per delivery, rank ratio will be based on the chip distribution. 2. To designate forward voltage and luminous flux ranks, please contact OPTEK. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue B.8 3/09 Page 4 of 10 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Lednium Series Optimal I OVTL01LGA Series Standard Bins Lamps are sorted to luminous flux (Φ) and forward voltage (VF) bins shown. Orders may be filled with any or all bins contained as below. OVTL01LGAR and OVTL01LGARS (RED) (IF = 350 mA) Luminous flux (lm) Dominant Wavelength 620-630nm V1 50 45 40 35 V2 R3V1 R3V2 R3 R2V1 R2V2 R2 R1V1 R1V2 R1 2.3 1.9 2.6 Forward Voltage (VF) OVTL01LGAW and OVTL01LGAWS (COOL WHITE) (IF = 350 mA) Luminous flux (lm) Typical CCT 7000°K (±600°K) V3 80 70 60 V4 C3V3 C3V4 C3 C2V3 C2V4 C2 C1V3 50 C1V4 3.4 2.9 C1 3.7 Forward Voltage (VF) OVTL01LGAWD and OVTL01LGAWDS (DAYLIGHT WHITE) (IF = 350 mA) Luminous flux (lm) Typical CCT 5800°K (±600°K) V3 80 V4 D3V3 D3V4 D3 D2V3 D2V4 D2 D1V3 D1V4 D1 70 60 50 2.9 3.4 3.7 Forward Voltage (VF) OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Issue B.8 3/09 Page 5 of 10 Lednium Series Optimal I OVTL01LGA Series Standard Bins Lamps are sorted to luminous flux (Φ) and forward voltage (VF) bins shown. Orders may be filled with any or all bins contained as below. OVTL01LGAWW and OVTL01LGAWWS (WARM WHITE) (IF = 350 mA) Luminous flux (lm) Typical CCT 3500°K (±300°K) V3 V4 W2V3 W2V4 W2 W1V3 W1V4 W1 W0V3 W0V4 W0 60 50 40 30 2.9 3.7 3.4 Forward Voltage (VF) White Color Bins 0.45 0.43 0.41 WW 0.39 0.37 0.35 WD 0.33 W 0.31 0.29 0.27 0.25 0.25 0.27 0.29 0.31 0.33 0.35 0.37 0.39 0.41 Color CCT Cool White 7000°K ± 600 WD Daylight White 5800°K ± 600 WW Warm White 3500°K ± 300 W 0.43 0.45 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue B.8 3/09 Page 6 of 10 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Lednium Series Optimal I OVTL01LGA Series CIE Chromaticity Diagram Spatial Intensity Distribution -1.0 -.8 -.6 -.4 -.2 0 .2 .4 .6 .8 1.0 137.7 degrees Normalized Spectral Intensity vs Angular Displacement OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Issue B.8 3/09 Page 7 of 10 Lednium Series Optimal I OVTL01LGA Series Typical Electro-Optical Characteristics Curves Input Current = 350 mA, TJ = 25° C 1.0 1.0 Normalized Spectral Intensity Normalized Spectral Intensity Input Current = 350 mA, TJ = 25° C 0.8 0.6 0.4 0.2 0.0 380 430 480 530 580 630 680 730 —— Cyan 0.8 0.6 0.4 0.2 0.0 200 780 300 400 700 780 Wavelength Characteristics Wavelength Characteristics Input Current = 350 mA, TJ = 25° C 1.0 0.8 Normalized Spectral Intensity 1.0 Normalized Spectral Intensity 600 Wavelength (nm) Input Current = 350 mA, TJ = 25° C —— Cool White 0.6 0.4 0.2 0.0 200 500 Wavelength (nm) —— Daylight White 0.8 0.6 0.4 0.2 300 400 500 600 0.0 700 780 200 Wavelength (nm) 300 400 500 600 700 780 Wavelength (nm) Wavelength Characteristics Wavelength Characteristics Input Current = 350 mA, TJ = 25° C 1.0 500 0.6 Current (I F) Normalized Spectral Intensity —— Warm White 0.8 0.4 0.2 400 Amber 300 Red Green 200 Blue/White 100 0 0.0 200 300 400 500 600 700 Wavelength (nm) Wavelength Characteristics 1.7 780 2.2 2.7 3.2 3.7 Voltage (V F) Forward Current vs. Forward Voltage OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue B.8 3/09 Page 8 of 10 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Lednium Series Optimal I OVTL01LGA Series Typical Electro-Optical Characteristics Curves Luminosity normalized to TJ = 25° C % Normalized Luminosity at Junction Temperature (° C) 0 25 50 75 100 125 OVTLO1LGAA(S) 125 100 85 70 60 45 OVTLO1LGAB(S) 107 100 95 87 75 65 OVTLO1LGAG(S) 110 100 95 85 70 65 OVTLO1LGAR(S) 135 100 90 75 65 50 OVTLO1LGAW(S) 105 100 93 82 68 60 OVTLO1LGAWD(S) 105 100 93 82 68 60 OVTLO1LGAWW(S) 105 100 93 82 68 60 Normalized Luminosity OPTEK Part Number Luminosity normalized to TJ = 25° C 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 - 0 20 40 60 80 100 120 140 160 Junction Temperature °C Solder Reflow Cycle T t OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Issue B.8 3/09 Page 9 of 10 Lednium Series Optimal I OVTL01LGA Series Reel Dimensions: Outer diameter: 13 inches [330 mm] Spindle diameter: 0.5 inches [13 mm] Cover tape thickness 0.10mm max Progressive Direction Empty Pockets With Tape (Minimum 50) Loaded Pockets Empty Pockets With Tape (Minimum 60) Empty Pockets With Unsealed Cover Tape (5-10) Carrier Tape Dimensions: Loaded quantity 1000 maximum pieces per reel 5.5±0.1 2.85 5.7±0.1 12.0±0.1 2.0 0.30±0.05 1.6±0.1 .1 +0 -0 .50 Ø1 4.0±0.1 2.0±0.1 12.0±0.1 6.4±0.1 Moisture Resistant Packaging Label Aluminum Moisture-proof Bag Desiccant Bar Code Label OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue B.8 3/09 Page 10 of 10 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com