RL07S1001J

Semi-Precision Mil-Qualified Metal Glaze™ Resistor RL Series • • • • • MIL-R-22684 ±200 ppm/°C 1/4 watt to 1/2 watt 2% and 5% tolerance 4.3 ohms to 470K ohms High temperature soldered termination-lead assembly Spiraled or laser helixed to resistance value, tolerance Tough molded jacket Metal Glaze thick film element fired at 1000°C to solid ceramic core Tin-lead electroplated copper leads Electrical Data MIL Type RL07 RL20 Marking Band Band Tolerance (±%) 2, 5 2, 5 T.C. (ppm/°C) 200 200 Power Rating (watts) 1/4 @ 70°C 1/2 @ 70°C Resistance Range (ohms)* 51 to 150K 4.3 to 470K Nominal Size 1/4W 1/2W Max Voltage Rating 250 350 * For values below or above Mil Resistance, the Non-Mil part can be used. But keep in mind -- it is a non-mil part. Environmental Data Test Conditions Temperature Coefficient (ppm/°C) Low Temperature Operation Thermal Shock Moisture Resistance Short Time Overload Load Life (70°C --- 1/4W) 1000 hours Terminal Strength Effect of Soldering Shock Vibration High Temperature Exposure (150°C No Load) Rated Power for 10,000 hours at 70°C Temperature Rise @ 1/4W Power Load Dielectric Strength General Note MIL-R-22684 Test Limits Allowed ±200 ±0.50% ±1.00% ±1.5% ±0.50% ±2.00% ±0.50% ±0.50% ±0.50% ±0.50% N/A N/A ±0.50% RL07 Max. %∆R (±3σ) ±200 ±0.10% ±0.15% ±0.05% ±0.10% ±0.40% ±0.10% ±0.10% ±0.05% ±0.05% ±0.75% ±0.60% See Temperature Rise Chart ±0.05% IRC reserves the right to make changes in product specification without notice or liability. All information is subject to IRC’s own data and is considered accurate at time of going to print. Wire and Film Technologies Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com A subsidiary of TT electronics plc RL Series Issue November 2008 Sheet 1 of 3 Semi-Precision Mil-Qualified Metal Glaze™ Resistor Physical Data LL BL LD BD Dimensions (Inches and (mm)) Nominal Size 1/4 watt Body Length BL 0.250 ±0.015 (6.4 ±0.4) 0.390 ±0.010 (9.9 ±0.3) Body Diameter BD 0.090 ±0.008 (2.3 ±0.2) 0.140 ±0.008 (3.6 ±0.2) Lead Length LL 1.50 ±0.125 (38.1 ±3.2) 1.50 ±0.125 (38.1 ±3.2) Lead Diameter LD 0.025 ±0.002 (0.64 ±0.05) 0.032 ±0.002 (0.81 ±0.05) Clean Lead 0.310 (7.9) 0.450 (11.4) 1/2 watt Commercial Power Derating Chart % Of Commercial Rated Power (in many cases 2X MIL Spec. power rating) 100 80 60 40 20 0 0 125 150 175 RG07 RG20 Ambient Temperature (°C) Wire and Film Technologies Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com RL Series Issue November 2008 Sheet 2 of 3 Semi-Precision Mil-Qualified Metal Glaze™ Resistor MIL Spec. Power Derating Chart 100 80 60 40 All RL 20 0 0 125 150 165 175 Ambient Temperature (°C) Ordering Data Sample Part No. MIL Style RL 07 S 1001 G RL = Fixed Film Resistor Power Rating 07 = 1/4 watt 20 = 1/2 watt Lead Material S = Solderable/weldable leads Resistance First three digits represent significant figures; fourth digit is number of zeros. Tolerance G = 2%, J = 5% Wire and Film Technologies Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com RL Series Issue November 2008 Sheet 3 of 3