WBD-DSOT23-00-1002-1002

Wire Bondable Voltage Divider Network DSOT Series • Tight TCR tracking • Extremely small footprint • Precision ratio tolerances to ±0.05% • Ultra-stable tantalum nitride resistors IRC’s TaNSil® voltage divider networks are ideally suited for low cost divider applications that demand precision performance in a wire bondable package. The tantalum nitride film system on silicon provides precision tolerance, exceptional TCR tracking and miniature physical dimensions. Excellent performance in harsh, humid environments is a trademark of IRC’s selfpassivating TaNSil® resistor film. For applications requiring high performance voltage dividers in a miniature, wire bondable package, specify IRC DSOT wire bondable die. Electrical Data Resistance Range Each Resistor Resistance Range Each Package Absolute Tolerance Ratio Tolerance to R1 Absolute TCR Tracking TCR Element Power Rating Package Power Rating Rated Operating Voltage (not to exceed √P x R) Operating Temperature Noise Substrate Material Substrate Thickness Bond Pad Metallization Backside Passivation General Note TCR/Inspection Code Table 10Ω to 500KΩ to 1.0MΩ to ±0.1% to ±0.05% to ±25ppm/°C to ±5ppm/°C 125mW @70°C 250mW @ 70°C 100V -55°C to + 150°C