10ETF10FP

Bulletin I2165 06/03 QUIETIR Series 10ETF..FP FAST SOFT RECOVERY RECTIFIER DIODE VF trr < 1.33V @ 10A = 80ns VRRM 1000 , 1200V Description/ Features The 10ETF..FP fast soft recovery QUIETIR rectifier series has been optimized for combined short reverse recovery time and low forward voltage drop. The glass passivation ensures stable reliable operation in the most severe temperature and power cycling conditions. Typical applications are both: output rectification and freewheeling in inverters, choppers and converters and input rectifications where severe restrictions on conducted EMI should be met. Major Ratings and Characteristics Characteristics IF(AV) Sinusoidal waveform VRRM IFSM VF trr TJ @ 10 A, TJ = 25°C @ 1A, 100A/µs Package Outline 10ETF..FP Units 10 1000 to 1200 160 1.33 80 - 40 to 150 A V A V ns °C TO-220AC FULLPAK www.irf.com 1 10ETF..FP QUIETIR Series Bulletin I2165 06/03 Voltage Ratings Part Number 10ETF10FP 10ETF12FP VRRM , maximum peak reverse voltage V 1000 1200 VRSM , maximum non repetitive peak reverse voltage V 1100 1300 IRRM 150°C mA 4 Absolute Maximum Ratings Parameters IF(AV) Max. Average Forward Current IFSM It 2 10ETF..FP Units 10 160 185 128 180 A A A2s A √s 2 Conditions @ TC = 95° C, 180° conduction half sine wave 10ms Sine pulse, rated VRRM applied 10ms Sine pulse, no voltage reapplied 10ms Sine pulse, rated VRRM applied 10ms Sine pulse, no voltage reapplied t = 0.1 to 10ms, no voltage reapplied Max. Peak One Cycle Non-Repetitive Surge Current Max. I t for fusing 2 I √t 2 Max. I √t for fusing 2 1800 Electrical Specifications Parameters VFM rt Max. Forward Voltage Drop Forward slope resistance 10ETF..FP Units 1.33 22.9 0.96 0.1 4 V mΩ V mA Conditions @ 10A, TJ = 25°C TJ = 150°C VF(TO) Threshold voltage IRM Max. Reverse Leakage Current TJ = 25 °C TJ = 150 °C VR = rated V RRM Recovery Characteristics Parameters trr Irr Qrr S Reverse Recovery Time Reverse Recovery Current Reverse Recovery Charge Typical Snap Factor 10ETF..FP Units 310 4.7 1.05 0.6 ns A µC Conditions IF @ 10Apk @ 25A/ µs @ 25°C 2 www.irf.com 10ETF..FP QUIETIR Series Bulletin I2165 06/03 Thermal-Mechanical Specifications Parameters TJ Tstg Max. Junction Temperature Range Max. Storage Temperature Range 10ETF..FP Units - 40 to 150 - 40 to 150 2.5 62 0.5 2 (0.07) Min. Max. 6 (5) 12 (10) °C °C °C/W °C/W °C/W g (oz.) Kg-cm (Ibf-in) Conditions RthJC Max. Thermal Resistance Junction to Case RthJA Max. Thermal Resistance Junction to Ambient RthCS Typical Thermal Resistance, Case to Heatsink wt T Approximate Weight Mounting Torque Case Style DC operation Mounting surface , smooth and greased TO-220AC FULLPAK JEDEC Maximum Allowable Case Temperature (°C) Maximum Allowable Case Temperature (°C) 150 140 130 120 110 100 90 80 70 0 2 30˚ 10ETF.. Series RthJC (DC) = 2.5 ˚C/W 150 140 130 120 110 100 90 80 70 0 2 4 30˚ 10ETF.. Series RthJC (DC) = 2.5 ˚C/W Conduction Angle Conduction Period 60˚ 90˚ 120˚ 180˚ 60˚ 90˚ 120˚ 180˚ DC 4 6 8 10 12 6 8 10 12 14 16 18 Average Forward Current (A) Average Forward Current (A) Fig. 1 - Current Rating Characteristics Ma ximum Average Forward Power Loss(W) Maximum Average F orward Power Los (W) s 16 14 12 10 8 6 4 2 0 0 2 4 10.T S F.. eries T J = 150°C 6 8 10 Conduction Angle Fig. 2 - Current Rating Characteristics 24 20 16 12 R Limit MS 8 4 0 Conduction Period 180° 120° 90° 60° 30° RMS Limit DC 180° 120° 90° 60° 30° 10ET S F.. eries TJ = 150°C 0 2 4 6 8 10 12 14 16 Average Forward Current (A) Average Forward Current (A) Fig. 3 - Forward Power Loss Characteristics Fig. 4 - Forward Power Loss Characteristics www.irf.com 3 10ETF..FP QUIETIR Series Bulletin I2165 06/03 Peak Half S Wave Forward Current (A) ine Peak Half Sine Wave F orward Current (A) 180 160 140 120 100 80 60 40 1 At Any Rated Load Condition And With Rated V ollowing S urge. RRM Ap plied F 200 180 160 140 120 100 80 60 40 0.01 Initial T = 150°C J @60 Hz 0.0083 s @50 Hz 0.0100 s Maximum Non Repetitive S urge Current VersusPulse T rain Duration. Initial T = 150°C J No Voltage R eapp lied R ated VRRM R eapplied 10E F S T .. eries 10ET .. S F eries 0.1 Pulse T rain Duration (s) 1 10 100 Number Of Equal Amplitude Half Cycle Current Pulses (N) Fig. 5 - Maximum Non-Repetitive Surge Current 1000 Instantaneous F orward Current (A) Fig. 6 - Maximum Non-Repetitive Surge Current TJ= 25°C 100 TJ= 150°C 10 10ET S F.. eries 1 0.5 1 1.5 2 2.5 3 3.5 4 4.5 Instantaneous F orward Voltage (V) Fig. 7 - Forward Voltage Drop Characteristics Maximum Reverse R ecovery T ime - T (µs) rr Maximum R evers R e ecovery T ime - T (µs) rr 0.6 0.5 0.4 0.3 0.2 0.1 0 I FM = 10 A 8A 5A 2A 1A 0.8 10ET .. S F eries TJ = 150 °C 0.6 10ET S F.. eries TJ = 25 °C 0.4 I FM = 10 A 8A 5A 2A 1A 0.2 0 40 80 120 160 200 0 0 40 80 120 160 200 Rate Of F Of F all orward Current - di/ dt (A/ µs) R ate Of F Of Forwa rd Current - di/ dt (A/ µs) all Fig. 8 - Recovery Time Characteristics, TJ = 25°C Fig. 9 - Recovery Time Characteristics, TJ = 150°C 4 www.irf.com 10ETF..FP QUIETIR Series Bulletin I2165 06/03 Maximum R everse R ecovery Charge - Qrr (µC) Maximum Revers R e ecovery Charge - Qrr (µC) 2 10ET S F.. eries TJ = 25 °C I FM = 10 A 5 10ET S F.. eries TJ = 150 °C 4 8A I FM = 10 A 1.6 8A 1.2 5A 3 5A 0.8 2A 2 2A 0.4 1A 1 1A 0 0 0 40 80 120 160 200 0 40 80 120 160 200 Rate Of Fall Of Forward Current - di/ dt (A/ µs) R ate Of F Of Forward Current - di/ dt (A/ µs) all Fig. 10 - Recovery Charge Characteristics, TJ = 25°C Maximum R everse R ecovery Current - Irr (A) 20 10ET .. S F eries TJ = 25 °C 16 I FM = 10 A 8A 5A 2A Fig. 11 - Recovery Charge Characteristics, TJ = 150°C Maximum R evers R e ecovery Current - Irr (A) 25 10ET S F.. eries TJ = 150 °C 20 8A I FM = 10 A 12 15 5A 2A 8 1A 10 1A 4 5 0 0 40 80 120 160 200 0 0 40 80 120 160 200 R ate Of F Of Forward Current - di/ dt (A/ µs) all Rate Of Fall Of Forward Current - di/ dt (A/ µs) Fig. 12 - Recovery Current Characteristics, TJ = 25°C Transient Thermal Impedance Z thJC (°C/W) Fig. 13 - Recovery Current Characteristics, TJ = 150°C Steady State Value (DC Operation) 10 D = 0.50 D = 0.33 D = 0.25 D = 0.17 D = 0.08 1 Single Pulse 10ETF.. Series 0.1 0.0001 0.001 0.01 0.1 1 10 Square Wave Pulse Duration (s) Fig. 14 - Thermal Impedance ZthJC Characteristics www.irf.com 5 10ETF..FP QUIETIR Series Bulletin I2165 06/03 Outline Table 10.6 10.4 HOLE ø 3.4 3.1 2.8 2.6 3.7 7.1 6.7 15.4 16.4 16.0 15.8 3.2 10° 3.1 3.3 13.7 2.54 TYP. 0.9 0.7 2.54 TYP. 0.48 0.44 2.85 2.65 1.15 1.4 1.3 1.05 TYP R0.7 (2 PLACES) R0.5 4.8 4.6 Dimensions in millimeters 5°± 0.5° 5°± 0.5° Ordering Information Table Device Code 10 1 1 2 3 4 5 6 - E 2 T 3 F 4 12 5 FP 6 1 CATHODE 2 3 ANODE Current Rating Circuit Configuration: E = Single Diode Package: T = TO-220AC Type of Silicon: F = Fast Soft Recovery Rectifier Voltage code: Code x 100 = V RRM TO-220AC FULLPAK 10 = 1000V 12 = 1200V 6 www.irf.com 13.5 10ETF..FP QUIETIR Series Bulletin I2165 06/03 Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 2 33 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 06/03 www.irf.com 7