10ETS12FPPBF

Bulletin I2195 12/04 SAFEIR Series 10ETS12FPPbF INPUT RECTIFIER DIODE TO-220 FULLPAK Lead-Free ("PbF" suffix) Description/ Features The 10ETS12FPPbF rectifier SAFEIR series has been optimized for very low forward voltage drop, with moderate leakage. The glass passivation technology used has reliable operation up to 150°C junction temperature. Typical applications are in input rectification and these products are designed to be used with International Rectifier Switches and Output Rectifiers which are available in identical package outlines. Fully isolated package (VINS = 2500 VRMS). UL E78996 approved VF < 1.1V @ 10A IFSM = 200A VRRM = 1200V Output Current in Typical Applications Applications Capacitive input filter T A = 55°C, TJ = 125°C common heatsink of 1°C/ W Single-phase Bridge 12.0 Three-phase Bridge 16.0 Units A Major Ratings and Characteristics Characteristics IF(AV) Sinusoidal waveform VRRM Range IFSM VF TJ @ 10 A, TJ = 25°C Package Outline Units A V A V °C Values 10 1200 200 1.1 - 40 to 150 TO-220AC FULLPAK www.irf.com 1 10ETS12FPPbF SAFEIR Series Bulletin I2195 12/04 Voltage Ratings VRRM , maximum Part Number peak reverse voltage V 10ETS12FPPbF 1200 VRSM , maximum non repetitive peak reverse voltage V 1300 IRRM 150°C mA 0.5 Absolute Maximum Ratings Parameters IF(AV) Max. Average Forward Current IFSM It 2 Values 10 170 200 130 145 Units A A A2s A √s 2 Conditions @ TC = 105° C, 180° conduction half sine wave 10ms Sine pulse, rated VRRM applied 10ms Sine pulse, no voltage reapplied 10ms Sine pulse, rated VRRM applied 10ms Sine pulse, no voltage reapplied t = 0.1 to 10ms, no voltage reapplied Max. Peak One Cycle Non-Repetitive Surge Current Max. I t for fusing 2 I √t 2 Max. I √t for fusing 2 1450 Electrical Specifications Parameters VFM rt IRM Max. Forward Voltage Drop Forward slope resistance Values 1.1 20 0.82 0.05 0.50 Units V mΩ V mA Conditions @ 10A, TJ = 25°C TJ = 150°C TJ = 25 °C TJ = 150 °C VF(TO) Threshold voltage Max. Reverse Leakage Current VR = rated V RRM Thermal-Mechanical Specifications Parameters TJ Tstg Max. Junction Temperature Range Max. Storage Temperature Range Values - 40 to 150 - 40 to 150 2.5 62 0.5 2 (0.07) Min. Max. 6 (5) 12 (10) Units °C °C °C/W °C/W °C/W g (oz.) Kg-cm (Ibf-in) Conditions RthJC Max. Thermal Resistance Junction to Case RthJA Max. Thermal Resistance Junction to Ambient RthCS Typical Thermal Resistance, Case to Heatsink wt T Approximate Weight Mounting Torque Case Style Marking Device DC operation Mounting surface , smooth and greased TO-220 FULLPAK 10ETS12FP (94/V0) 2 www.irf.com 10ETS12FPPbF SAFEIR Series Bulletin I2195 12/04 Maximum Allowable Case T emperature (°C) 140 130 10ET .. S S eries R thJC(DC) = 2.5 °C/ W Maximum Allowable Case T emperature (°C) 150 150 140 130 10ET .. S S eries R thJC (DC) = 2.5 °C/ W Conduction Angle 120 110 100 90 80 0 2 4 6 8 Average Forwa rd Current (A) 30° 60° 90° 120° Conduction Period 120 110 100 90 0 2 4 6 8 10 12 14 Average F orward Current (A) 30° 60° 90° 120° 180° DC 16 18 180° 10 12 Fig. 1 - Current Rating Characteristics 16 14 12 10 RMSLimit 8 6 4 2 0 0 2 4 Conduction Angle Fig. 2 - Current Rating Characteristics 20 18 16 14 12 10 8 6 4 2 0 0 2 4 6 8 10 12 14 16 Average F orward Current (A) R Limit MS Cond uction Period Maximum Average Forward Power Loss (W) Maximum Average Forward Power Loss (W) 180° 120° 90° 60° 30° DC 180° 120° 90° 60° 30° 10ET .. S S eries TJ = 150°C 6 8 10 10ET .. S S eries T = 150°C J Average F orward Current (A) Fig. 3 - Forward Power Loss Characteristics Peak Half S ine Wave F orward Current (A) 200 180 160 140 120 100 80 60 40 1 10 100 Number Of Equal Amplitude Half Cycle Current Puls (N) es Fig. 4 - Forward Power Loss Characteristics 240 220 Peak Half S Wave Forward Current (A) ine At Any Rated Load Condition And With Rated V RR Ap plied Following S urge. M Initial TJ = 150°C @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s Maximum Non Repetitive S urge Current Versus Pulse T rain Dura tion. Initial TJ = 150 °C 200 No Voltage Reap plied R ated VRRM Reapplied 180 160 140 120 100 80 60 40 0.01 10ET .. S S eries 10ET .. S S eries 0.1 Pulse T rain Duration (s) 1 Fig. 5 - Maximum Non-Repetitive Surge Current Fig. 6 - Maximum Non-Repetitive Surge Current www.irf.com 3 10ETS12FPPbF SAFEIR Series Bulletin I2195 12/04 100 Insta ntaneous F orward Current (A) TJ= 25°C TJ= 150°C 10 10ET .. S S eries 1 0 0.5 1 1.5 2 2.5 3 Instantaneous F orward Voltage (V) Fig. 8 - Forward Voltage Drop Characteristics T ransient T rmal Impedanc e Z thJC (°C/ W) he 10 D = 0.50 D = 0.33 D = 0.25 D = 0.17 D = 0.08 S tead y S tate Value (DC Operation) 1 S ingle Pulse 10ET .. S S eries 0.1 0.0001 0.001 0.01 0.1 1 10 S quare Wave Pulse Duration (s) Fig. 9 - Thermal Impedance ZthJC Characteristics 4 www.irf.com 10ETS12FPPbF SAFEIR Series Bulletin I2195 12/04 Outline Table Base Cathode 2 10.6 10.4 HOLE ø 3.4 3.1 2.8 2.6 Dimensions in millimeters 1 3 Cathode Anode 3.7 7.1 6.7 16.4 3.2 Part Marking Information 10° 15.4 16.0 15.8 3.1 3.3 13.7 13.5 EXAMPLE: THIS IS A 10ETS12FP 2.54 TYP. LOT CODE 1789 0.9 0.48 0.7 ASSEMBLED ON WW 19, 2002 0.44 2.54 TYP. IN THE ASSEMBLY LINE "C" 2.85 2.65 INTERNATIONAL RECTIFIER LOGO 1.4 PART NUMBER FP = Fullpack 1.15 1.05 1.3 TYP R0.7 (2 PLACES) R0.5 ASSEMBLY LOT CODE 5°± 0.5° 5°± 0.5° www.irf.com 4.8 4.6 DATE CODE YEAR = 2002 WEEK 19 P = Lead-Free 5 10ETS12FPPbF SAFEIR Series Bulletin I2195 12/04 Ordering Information Table Device Code 10 1 1 2 3 4 5 6 7 6 - E 2 T 3 S 4 12 5 FP 6 PbF 7 Current Rating (10 = 10A) Circuit Configuration: E = Single Diode Package: T = TO-220AC Type of Silicon: S = Standard Recovery Rectifier Voltage Rating (12 = 1200V) Fullpak none = Standard Production PbF = Lead-Free Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level and Lead-Free. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 2 33 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 12/04 6 www.irf.com