115CNQ015ASL

Bulletin PD-20632 rev. A 09/01 115CNQ015A SCHOTTKY RECTIFIER New GenIII D-61 Package Major Ratings and Characteristics Characteristics IF(AV) Rectangular waveform VRRM IFSM @ tp = 5 µs sine VF TJ @55 Apk, TJ= 75 °C (per leg) range 110 Amp Description/Features The 115CNQ015A center tap Schottky rectifier module has been optimized for ultra low forward voltage drop specifically for the OR-ing of parallel power supplies. The proprietary barrier technology allows for reliable operation up to 125 °C junction temperature. Typical applications are in parallel switching power supplies, converters, reverse battery protection, and redundant power subsystems. 125°C TJ operation (VR < 5V) Center tap module Optimized for OR-ing applications Ultra low forward voltage drop High frequency operation Guard ring for enhanced ruggedness and long term reliability High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance 115CNQ015A Units 110 15 5050 0.33 A V A V - 55 to 125 °C New fully transfer-mold low profile, small footprint, high current package Case Styles 115CNQ015A 115CNQ015ASM 115CNQ015ASL D61-8 www.irf.com D61-8-SM D61-8-SL 1 115CNQ015A Bulletin PD-20632 rev. A 09/01 Voltage Ratings Part number VR Max. DC Reverse Voltage (V) @ TJ = 100°C @ TJ = 125°C VRWM Max. DC Reverse Voltage (V) 115CNQ015A 15 5 Absolute Maximum Ratings Parameters IF(AV) Max. Average Forward Current IFSM EAS IAR * See Fig. 5 Per Leg Per Device 115CNQ Units 55 110 5050 830 54 2 A mJ A A Conditions 50% duty cycle @ TC = 112 °C, rectangular wave form 5µs Sine or 3µs Rect. pulse Following any rated load condition and with 10ms Sine or 6ms Rect. pulse rated VRRM applied Max. Peak One Cycle Non-Repetitive Surge Current (Per Leg) * See Fig. 7 Non-Repetitive Avalanche Energy (Per Leg) Repetitive Avalanche Current (Per Leg) TJ = 25 °C, IAS = 2 Amps, L = 4.5 mH Current decaying linearly to zero in 1 µsec Frequency limited by TJ max. VA = 3 x VR typical Electrical Specifications Parameters VFM Max. Forward Voltage Drop (Per Leg) * See Fig. 1 (1) 115CNQ Units 0.37 0.46 0.33 0.43 20 1200 900 540 V V V V mA mA mA mA pF nH V/ µs @ 55A @ 110A @ 55A @ 110A Conditions TJ = 25 °C TJ = 75 °C VR = rated VR VR = 12V VR = 5V IRM Max. Reverse Leakage Current (Per Leg) * See Fig. 2 (1) TJ = 25 °C TJ = 100 °C TJ = 100 °C TJ = 100 °C CT LS Max. Junction Capacitance (Per Leg) Typical Series Inductance (Per Leg) 5500 5.5 10000 VR = 5VDC (test signal range 100Khz to 1Mhz) 25°C Measured lead to lead 5mm from package body dv/dt Max. Voltage Rate of Change (Rated VR) Thermal-Mechanical Specifications Parameters TJ Tstg Max. Junction Temperature Range Max. Storage Temperature Range (1) Pulse Width < 300µs, Duty Cycle