11DQ05TR

Bulletin PD-2.288 rev. E 03/03 11DQ05 11DQ06 SCHOTTKY RECTIFIER 1.1 Amp Major Ratings and Characteristics Characteristics IF(AV) Rectangular waveform VRRM IFSM @ tp = 5 µs sine VF TJ @ 1 Apk, TJ = 125°C range Description/ Features Units A V A V °C The 11DQ.. axial leaded Schottky rectifier has been optimized for very low forward voltage drop, with moderate leakage. Typical applications are in switching power supplies, converters, free-wheeling diodes, and reverse battery protection. Low profile, axial leaded outline High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance Very low forward voltage drop High frequency operation Guard ring for enhanced ruggedness and long term reliability 11DQ.. 1.1 50/60 150 0.53 - 40 to 150 CASE STYLE AND DIMENSIONS Conform to JEDEC Outline DO-204AL (DO-41) Dimensions in millimeters and inches www.irf.com 1 11DQ05, 11DQ06 Bulletin PD-2.288 rev. E 03/03 Voltage Ratings Part number VR Max. DC Reverse Voltage (V) VRWM Max. Working Peak Reverse Voltage (V) 11DQ05 50 11DQ06 60 Absolute Maximum Ratings Parameters IF(AV) Max. Average Forward Current * See Fig. 4 IFSM EAS IAR Max. Peak One Cycle Non-Repetitive Surge Current * See Fig. 6 Non-Repetitive Avalanche Energy Repetitive Avalanche Current 150 25 2.0 1.0 A mJ A 5µs Sine or 3µs Rect. pulse Following any rated load condition and with 10ms Sine or 6ms Rect. pulse rated VRRM applied 11DQ.. 1.1 Units A Conditions 50% duty cycle @ TC = 84°C, rectangular wave form TJ = 25 °C, IAS = 1 Amps, L = 4 mH Current decaying linearly to zero in 1 µsec Frequency limited by TJ max. VA = 1.5 x VR typical Electrical Specifications Parameters VFM Max. Forward Voltage Drop * See Fig. 1 (1) 11DQ.. Units Conditions 0.58 0.76 0.53 0.64 1.0 11 55 8.0 10000 V V V V mA mA pF nH V/µs @ 1A @ 2A @ 1A @ 2A TJ = 25 °C TJ = 125 °C VR = 5VDC (test signal range 100Khz to 1Mhz) 25°C Measured lead to lead 5mm from package body (Rated VR) VR = rated VR TJ = 25 °C TJ = 125 °C IRM CT LS Max. Reverse Leakage Current * See Fig. 2 Typical Series Inductance (1) Typical Junction Capacitance dv/dt Max. Voltage Rate of Change (1) Pulse Width < 300µs, Duty Cycle