12CWQ10FN

Bulletin PD-20548 rev. F 01/03 12CWQ10FN SCHOTTKY RECTIFIER 12 Amp D-Pak (TO-252AA) Major Ratings and Characteristics Characteristics IF(AV) Rectangular waveform VRRM IFSM @ tp = 5 µs sine VF TJ @ 6 Apk, TJ = 125°C (per leg) range - 55 to 150 °C 12CWQ10FN 12 100 330 0.65 Description/ Features Units A V A V The 12CWQ10FN surface mount, center tap, Schottky rectifier series has been designed for applications requiring low forward drop and small foot prints on PC board. Typical applications are in disk drives, switching power supplies, converters, freewheeling diodes, battery charging, and reverse battery protection. Popular D-PAK outline Center tap configuration Small foot print, surface mountable Low forward voltage drop High frequency operation Guard ring for enhanced ruggedness and long term reliability 2.38 (0.09) 6.73 (0.26) 6.35 (0.25) 5.46 (0.21) 5.21 (0.20) 4 2.19 (0.08) 1.14 (0.04) 0.89 (0.03) 0.58 (0.02) 0.46 (0.02) MINIMUM RECOMMENDED FOOTPRINT 5.97 (0.24) 1.27 (0.05) 0.88 (0.03) 6.45 (0.24) 6.22 (0.24) 1.64 (0.02) 1 2 3 5.68 (0.22) 10.42 (0.41) 9.40 (0.37) 0.51 (0.02) MIN. 6.48 (0.26) 10.67 (0.42) 5.97 (0.23) 1.52 (0.06) 1.15 (0.04) 2x 1.14 (0.04) 0.76 (0.03) 2.28 (0.09) 2x 4.57 (0.18) 1 - Anode 2 - Cathode 3 - Anode 4 - Cathode 3x 0.89 (0.03) 0.64 (0.02) 2x 2.54 (0.10) 1.65 (0.06) 2x 2.28 (0.09) 2x Base Common Cathode 4 0.58 (0.02) 0.46 (0.02) Conform to JEDEC outline D-Pak (Similar to TO-252AA) Dimensions in millimeters and (inches) Anode 2 Common 1 Cathode 3 Anode www.irf.com 1 12CWQ10FN Bulletin PD-20548 rev. F 01/03 Voltage Ratings Part number VR Max. DC Reverse Voltage (V) 100 VRWM Max. Working Peak Reverse Voltage (V) 12CWQ10FN Absolute Maximum Ratings Parameters IF(AV) Max. Average Forward Current * See Fig. 5 IFSM EAS IAR (Per Leg) (Per Device) 12CWQ... Units 6 12 330 110 6 1 A mJ A A Conditions 50% duty cycle @ TC = 135°C, rectangular wave form 5µs Sine or 3µs Rect. pulse Following any rated load condition and with 10ms Sine or 6ms Rect. pulse rated VRRM applied Max.PeakOneCycleNon-Repetitive Surge Current * See Fig. 7(Per Leg) Non-Repetit. AvalancheEnergy(PerLeg) RepetitiveAvalancheCurrent(PerLeg) TJ = 25 °C, IAS = 1 Amps, L = 12 mH Current decaying linearly to zero in 1 µsec Frequency limited by TJ max. VA = 1.5 x VR typical Electrical Specifications Parameters VFM Max. Forward Voltage Drop (Per Leg) * See Fig. 1 (1) 12CWQ... Units 0.80 0.95 0.65 0.78 1 4 0.47 20.68 183 5.0 V V V V mA mA V mΩ Conditions @ 6A @ 12A @ 6A @ 12A TJ = 25 °C TJ = 125 °C TJ = TJ max. TJ = 25 °C TJ = 125 °C VR = rated VR IRM Max. Reverse Leakage Current (Per Leg) * See Fig. 2 (1) VF(TO) Threshold Voltage rt CT LS Forward Slope Resistance Typ. Junction Capacitance (Per Leg) Typical Series Inductance (Per Leg) pF nH VR = 5VDC, (test signal range 100Khz to 1Mhz) 25°C Measured lead to lead 5mm from package body (1) Pulse Width < 300µs, Duty Cycle