15CLQ100

PD -20351F SCHOTTKY RECTIFIER HIGH EFFICIENCY SERIES 15CLQ100 15A, 100V Major Ratings and Characteristics Characteristics IF(AV) VRRM (Per Leg) IFSM @ tp = 8.3ms half-sine (Per Leg) VF @ 5.0Apk, TJ =125°C (Per Leg) 15CLQ100 Units 15 100 250 A V A Description/Features The 15CLQ100 center tap Schottky rectifier has been expressly designed to meet the rigorous requirements of hi-rel environments. It is packaged in the hermetic surface mount SMD-1 ceramic package. The device's forward voltage drop and reverse leakage current are optimized for the lowest power loss and the highest circuit efficiency for typical high frequency switching power supplies and resonent power converters. Full MIL-PRF-19500 quality conformance testing is available on source controlled drawings to TX, TXV and S levels. • • • • • Hermetically Sealed Center Tap Low Forward Voltage Drop High Frequency Operation Guard Ring for Enhanced Ruggedness and Long Term Reliability • Surface Mount • Lightweight 0.53 V TJ, Tstg Operating and storage -55 to 150 °C CASE STYLE 2 1 3 ANODE COMMON ANODE CATHODE Case Outline and Dimensions - SMD-1 www.irf.com 1 03/26/02 15CLQ100 Voltage Ratings Part number VR Max. DC Reverse Voltage (V) (Per Leg) VRWM Max. Working Peak Reverse Voltage (V) (Per Leg) 15CLQ100 100 Absolute Maximum Ratings Parameters IF(AV) Max. Average Forward Current See Fig. 5 I FSM Max. Peak One Cycle Non - Repetitive Surge Current (Per Leg) 250 A @ tp = 8.3 ms half-sine Limits 15 Units A Conditions 50% duty cycle @ TC = 100°C, rectangular waveform Electrical Specifications Parameters V FM Max. Forward Voltage Drop (Per Leg) See Fig. 1Q Limits 0.67 0.9 0.53 0.72 Units V V V V mA mA pF nH @ 5.0A @ 15A @ 5.0A @ 15A T J = 25°C TJ = 125°C Conditions TJ = 25°C TJ = 125°C VR = rated VR IRM CT LS Max. Reverse Leakage Current (Per Leg) See Fig. 2 Q Max. Junction Capacitance (Per Leg) Typical Series Inductance (Per Leg) 0.5 15 600 5.9 VR = 5VDC ( 1MHz, 25°C ) Measured from center of cathode pad to center of anode pad Thermal-Mechanical Specifications Parameters TJ Tstg Max.Junction Temperature Range Max. Storage Temperature Range to Case (Per Leg) RthJC Max. Thermal Resistance, Junction to Case (Per Package) wt Weight (Typical) Die Size Case Style 2.4 125X125 SMD-1 g mils 0.83 °C/W DC operation Limits Units -55 to 150 -55 to 150 1.67 °C °C °C/W DC operation Conditions RthJC Max. Thermal Resistance, Junction See Fig. 4 Q Pulse Width < 300µs, Duty Cycle < 2% 2 www.irf.com 15CLQ100 100 TJ = 175 ° C Reverse Current - IR ( mA ) 10 150 ° C 125 ° C 75 ° C 50 ° C 1 0.1 0.01 0.001 25 ° C A 0 20 40 60 80 100 0.0001 Reverse Voltage - VR (V) Fig. 2 - Typical Values of Reverse Current Vs. Reverse Voltage (Per Leg) Fig. 1 - Max. Forward Voltage Drop Characteristics (Per Leg) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage (Per Leg) www.irf.com 3 15CLQ100 10 Thermal Response (Z thJC ) 1 D = 0.50 0.20 0.10 0.1 0.05 0.02 0.01 SINGLE PULSE  (THERMAL RESPONSE) 0.01 0.00001  Notes: 1. Duty factor D = t 1 / t 2 2. Peak TJ = P DM x Z thJC + TC 0.1 1 0.01 10  P DM t1 t2 0.0001 0.001 t1 , Rectangular Pulse Duration (sec) Fig. 4 - Max. Thermal Impedance ZthJC Characteristics (Per Leg) 15CLQ100 R thJC (DC) = 0.83°C/W Fig. 5 - Max. Allowable Case Temperature Vs. Average Forward Current IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7903 Visit us at www.irf.com for sales contact information. Data and specifications subject to change without notice. 03/02 4 www.irf.com