15ETL06

Bulletin PD-20890 rev. A 10/06 15ETL06PbF 15ETL06FPPbF Ultra-low VF Hyperfast Rectifier for Discontinuous Mode PFC Features • • • • • • • Benchmark Ultra-low Forward Voltage Drop Hyperfast Recovery Time Low Leakage Current 175°C Operating Junction Temperature Fully Isolated package (VINS = 2500 VRMS) UL E78996 approved Lead-Free ("PbF" suffix) VF = 0.99V typ. IF(AV) = 15Amp VR = 600V Description State of the art, ultra-low V F, soft-switching Hyperfast Rectifiers optimized for Discontinuous (Critical) Mode (DCM) Power Factor Correction (PFC). The minimised conduction loss, optimized stored charge and low recovery current minimize the switching losses and reduce over dissipation in the switching element and snubbers. The device is also intended for use as a free wheeling diode in power supplies and other power switching applications. Applications AC-DC SMPS 70W-400W e.g. Laptop & Printer AC Adaptors, Desktop PC, TV & Monitor, Games units and DVD AC-DC power supplies. Absolute Maximum Ratings Parameters VRRM IF(AV) IFSM IFM TJ, TSTG Peak Repetitive Reverse Voltage Average Rectified Forward Current @ TC = 154°C @ TC = 120°C (FULLPACK) Non Repetitive Peak Surge Current @ TJ = 25°C Peak Repetitive Forward Current Operating Junction and Storage Temperatures 250 30 - 65 to 175 °C Max 600 15 Units V A Case Styles 15ETL06PbF 15ETL06FPPbF Base Cathode 2 1 3 Cathode 1 3 Anode Cathode Anode TO-220AC www.irf.com TO-220 FULLPACK 1 15ETL06PbF, 15ETL06FPPbF Bulletin PD-20890 rev. A 10/06 Electrical Characteristics @ TJ = 25°C (unless otherwise specified) Parameters VBR, Vr VF Breakdown Voltage, Blocking Voltage Forward Voltage Min Typ Max Units Test Conditions 600 V V V μA μA pF nH IR = 100μA IF = 15A, TJ = 25°C IF = 15A, TJ = 150°C VR = VR Rated TJ = 150°C, VR = VR Rated VR = 600V Measured lead to lead 5mm from package body 0.99 1.05 0.85 0.92 0.1 15 20 8.0 10 120 - IR Reverse Leakage Current - CT LS Junction Capacitance Series Inductance - Dynamic Recovery Characteristics @ TC = 25°C (unless otherwise specified) Parameters trr Reverse Recovery Time Min Typ Max Units Test Conditions 60 190 320 19 26 2.2 4.3 120 270 220 μC A ns IF = 1A, diF/dt = 100A/μs, VR = 30V IF = 15A, diF/dt = 100A/μs, VR = 30V TJ = 25°C TJ = 125°C TJ = 25°C TJ = 125°C TJ = 25°C TJ = 125°C IF = 15A diF /dt = 200A/μs VR = 390V IRRM Peak Recovery Current - Qrr Reverse Recovery Charge - Thermal - Mechanical Characteristics Parameters TJ TStg RthJC Max. Junction Temperature Range Max. Storage Temperature Range Thermal Resistance, Junction to Case Per Leg Min - 65 - Typ 1.0 3.0 0.5 2.0 0.07 - Max 175 175 1.3 3.5 70 12 10 Units °C °C/W Fullpack (Per Leg) RthJA RthCS Thermal Resistance, Junction to Ambient Thermal Resistance, Case to Heatsink Weight Per Leg g (oz) Kg-cm lbf.in Mounting Torque 6.0 5.0 Typical Socket Mount Mounting Surface, Flat, Smooth and Greased 2 www.irf.com 15ETL06PbF, 15ETL06FPPbF Bulletin PD-20890 rev. A 10/06 100 100 Reverse Current - I R (μA) Tj = 175˚C 150˚C 125˚C 10 1 0.1 0.01 100˚C 75˚C 50˚C 25˚C Instantaneous Forward Current - I F (A) T = 175˚C J 0.001 0 100 200 300 400 500 600 Reverse Voltage - VR (V) Fig. 2 - Typical Values Of Reverse Current Vs. Reverse Voltage 10 T = 150˚C J T = 25˚C J Junction Capacitance - C T (pF) 100 T J = 25˚C 1 0.4 10 0.6 0.8 1 1.2 1.4 1.6 0 100 200 300 400 500 600 Forward Voltage Drop - VFM (V) Fig. 1 - Typical Forward Voltage Drop Characteristics Reverse Voltage - VR (V) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage 10 (°C/W) thJC Thermal Impedance Z 1 0.1 D = 0.50 D = 0.20 D = 0.10 D = 0.05 D = 0.02 D = 0.01 Notes: PDM t1 t2 Single Pulse (Thermal Resistance) 1. Duty factor D = t1/ t2 2. Peak Tj = Pdm x ZthJC + Tc 0.01 0.00001 0.0001 0.001 0.01 0.1 1 t1, Rectangular Pulse Duration (Seconds) Fig. 4 - Max. Thermal Impedance Z thJC Characteristics 10 www.irf.com 3 15ETL06PbF, 15ETL06FPPbF Bulletin PD-20890 rev. A 10/06 10 (°C/W) Thermal Impedance Z 1 D = 0.50 D = 0.20 D = 0.10 D = 0.05 D = 0.02 D = 0.01 Single Pulse (Thermal Resistance) Notes: thJC PDM t1 t2 0.1 1. Duty factor D = t1/ t2 2. Peak Tj = Pdm x ZthJC + Tc 0.01 0.00001 0.0001 0.001 0.01 0.1 1 t 1, Rectangular Pulse Duration (Seconds) 10 100 Fig. 5 - Max. Thermal Impedance Z thJC Characteristics (FULLPACK) 180 Allowable Case Temperature (°C) Allowable Case Temperature (°C) 180 160 140 120 Square wave (D = 0.50) 80% Rated Vr applied 170 160 150 Square wave (D = 0.50) Rated Vr applied DC DC 140 see note (3) 100 see note (3) 80 130 0 5 10 15 20 25 Average Forward Current - IF(AV) (A) Fig. 6 - Max. Allowable Case Temperature Vs. Average Forward Current 0 5 10 15 20 25 Average Forward Current - IF(AV) (A) Fig. 7 - Max. Allowable Case Temperature Vs. Average Forward Current (FULLPACK) 25 Average Power Loss ( Watts ) 20 15 10 5 0 0 5 10 DC RMS Limit D = 0.01 D = 0.02 D = 0.05 D = 0.1 D = 0.2 D = 0.5 (3) Formula used: TC = TJ - (Pd + PdREV) x RthJC ; Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 8); PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1 = rated VR 15 20 25 Average Forward Current - IF(AV) (A) Fig. 8 - Forward Power Loss Characteristics 4 www.irf.com 15ETL06PbF, 15ETL06FPPbF Bulletin PD-20890 rev. A 10/06 500 IF = 30 A IF = 15 A 9000 8000 7000 6000 Qrr ( nC ) IF = 30 A IF = 15 A 400 trr ( ns ) 300 5000 4000 3000 200 100 V R = 390V T J = 125˚C T J = 25˚C 2000 1000 0 100 V R = 390V T J = 125˚C T J = 25˚C 0 100 1000 1000 di F /dt (A/μs ) Fig. 9 - Typical Reverse Recovery vs. di F /dt di F /dt (A/μs ) Fig. 10 - Typical Stored Charge vs. di F /dt Reverse Recovery Circuit VR = 200V 0.01 Ω L = 70µH D.U.T. dif/dt ADJUST diF /dt D G IRFP250 S Fig. 11- Reverse Recovery Parameter Test Circuit www.irf.com 5 15ETL06PbF, 15ETL06FPPbF Bulletin PD-20890 rev. A 10/06 3 IF 0 trr ta tb 4 Q rr 2 I RRM 0.5 I RRM di(rec)M/dt 0.75 I RRM 5 1 diF /dt f /dt 4. Qrr - Area under curve defined by t rr and IRRM t rr x I RRM Q rr = 2 5. di (rec) M / dt - Peak rate of change of current during t b portion of t rr 1. diF/dt - Rate of change of current through zero crossing 2. IRRM - Peak reverse recovery current 3. trr - Reverse recovery time measured from zero crossing point of negative going IF to point where a line passing through 0.75 IRRM and 0.50 IRRM extrapolated to zero current Fig. 12 - Reverse Recovery Waveform and Definitions Outline Table Conforms to JEDEC Outline TO-220AC Dimensions in millimeters and (inches) 6 www.irf.com 15ETL06PbF, 15ETL06FPPbF Bulletin PD-20890 rev. A 10/06 Outline Table 10.6 10.4 HOLE ø 3.4 3.1 2.8 2.6 3.7 3.2 7.1 6.7 1 3 Cathode 15.8 Anode 16.4 15.4 16.0 10° 3.1 3.3 13.7 2.54 TYP. 0.9 0.7 2.54 TYP. 0.48 0.44 2.85 2.65 1.15 1.4 1.3 1.05 TYP R0.7 (2 PLACES) R0.5 4.8 4.6 Conforms to JEDEC Outline TO-220 FULLPACK Dimensions in millimeters and (inches) 5°± 0.5° 5°± 0.5° Part Marking Information (TO-220) IRXC Assembly Line EXAMPLE: THIS IS A 15ETL06 LOT CODE 1789 ASSEMBLED ON WW 19, 2001 IN THE ASSEMBLY LINE "C" INTERNATIONAL RECTIFIER LOGO DATE CODE ASSEMBLY LOT CODE P = LEAD-FREE YEAR 1 = 2001 WEEK 19 LINE C PART NUMBER IRMX Assembly Line EXAMPLE: THIS IS A 15ETL06 LOT CODE 1789 ASSEMBLED ON WW 19, 2001 IN THE ASSEMBLY LINE "C" INTERNATIONAL RECTIFIER LOGO PART NUMBER DATE CODE ASSEMBLY LOT CODE YEAR 1 = 2001 WEEK 19 P = LEAD-FREE www.irf.com 13.5 7 15ETL06PbF, 15ETL06FPPbF Bulletin PD-20890 rev. A 10/06 Part Marking Information (TO-220 FULL-PAK) PART NUMBER FP = Fullpack EXAMPLE: THIS IS A 15ETL06FP LOT CODE 1789 ASSEMBLED ON WW 19, 2002 IN THE ASSEMBLY LINE "C" INTERNATIONAL RECTIFIER LOGO ASSEMBLY LOT CODE DATE CODE YEAR = 2002 WEEK 19 P = Lead-Free Ordering Information Table Device Code 15 1 1 2 3 4 5 6 7 - E 2 T 3 L 4 06 5 FP 6 PbF 7 Current Rating (15 = 15A) E T L = Single Diode = TO-220, D2Pak = Ultra-low VF HyperFast Recovery none = TO-220AC FP = TO-220 FULLPACK none = Standard Production PbF = Lead-Free Tube Standard Pack Quantity: 50 pieces Voltage Rating (06 = 600V) Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level and Lead-Free. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 2 33 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 10/06 8 www.irf.com