15TQ060S

Bulletin PD-20563 rev. A 09/01 15TQ060 15TQ060S SCHOTTKY RECTIFIER 15 Amp Major Ratings and Characteristics Characteristics IF(AV) Rectangular waveform VRRM IFSM @ tp = 5 µs sine VF TJ @ 15 Apk, TJ = 125°C range Description/Features Units A V A V °C The 15TQ060 Schottky rectifier has been optimized for very low forward voltage drop, with moderate leakage. The proprietary barrier technology allows for reliable operation up to 150° C junction temperature. Typical applications are in switching power supplies, converters, free-wheeling diodes, and reverse battery protection. 150° C TJ operation High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance Very low forward voltage drop High frequency operation Guard ring for enhanced ruggedness and long term reliability 15TQ060 15 60 1000 0.56 - 55 to 150 Case Styles 15TQ060 15TQ060S Base Cathode Base Cathode 2 1 3 1 3 Cathode Anode N/C Anode TO-220AC www.irf.com D2PAK 1 15TQ060, 15TQ060S Bulletin PD-20563 rev. A 09/01 Voltage Ratings Part number VR Max. DC Reverse Voltage (V) VRWM Max. Working Peak Reverse Voltage (V) 15TQ060 60 Absolute Maximum Ratings Parameters IF(AV) Max. Average Forward Current * See Fig. 5 IFSM EAS IAR Max. Peak One Cycle Non-Repetitive Surge Current * See Fig. 7 Non-Repetitive Avalanche Energy RepetitiveAvalancheCurrent 15TQ 15 1000 260 6 1.50 Units A Conditions 50% duty cycle @ TC = 104° C, rectangular wave form 5µs Sine or 3µs Rect. pulse 10ms Sine or 6ms Rect. pulse Following any rated load condition and with rated VRRM applied A mJ A TJ = 25 °C, IAS = 1.50 Amps, L = 11.5 mH Current decaying linearly to zero in 1 µsec Frequency limited by TJ max. VA = 1.5 x VR typical Electrical Specifications Parameters VFM Max. Forward Voltage Drop * See Fig. 1 (1) 15TQ 0.62 0.82 0.56 0.71 Units V V V V mA mA pF nH V/ µs @ 15A @ 30A @ 15A @ 30A TJ = 25 °C TJ = 125 °C Conditions TJ = 25 °C TJ = 125 °C VR = rated VR IRM CT LS Max. Reverse Leakage Current (1) * See Fig. 2 Max. Junction Capacitance Typical Series Inductance 0.80 45 720 8.0 10000 VR = 5VDC, (test signal range 100Khz to 1Mhz) 25 °C Measured lead to lead 5mm from package body dv/dt Max. Voltage Rate of Change (Rated VR) (1) Pulse Width < 300µs, Duty Cycle < 2% Thermal-Mechanical Specifications Parameters TJ Tstg Max. Junction Temperature Range Max. Storage Temperature Range 15TQ -55 to 150 -55 to 150 3.25 0.50 2 (0.07) Min. Max. 6 (5) 12 (10) Units °C °C °C/W °C/W g (oz.) Kg-cm (Ibf-in) JEDEC DC operation Conditions RthJC Max. Thermal Resistance Junction to Case RthCS Typical Thermal Resistance, Case to Heatsink wt T Approximate Weight Mounting Torque Case Style * See Fig. 4 Mounting surface , smooth and greased TO-220AC 2 www.irf.com 15TQ060, 15TQ060S Bulletin PD-20563 rev. A 09/01 1000 1000 100 R ever s e Current - I R (mA) 10 100 C 1 0.1 0.01 0.001 0 10 20 30 40 50 60 R evers e Voltage - V R (V) 75 C 50 C 25 C T J = 150 C 125 C T J = 150 C T J = 125 C Ins tantaneous F orward Current - I F (A) 100 T J = 25 C Fig. 2 - Typical Values of Reverse Current Vs. Reverse Voltage 1000 Junction Capacitance - C T (pF ) 10 T J = 25 C 1 0 0.4 0.8 1.2 1.6 2 F orward Voltage Drop - VF M (V) 100 0 10 20 30 40 50 60 R evers e Voltage - V R (V) Fig. 1 - Maximum Forward Voltage Drop Characteristics Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage 10 Thermal Impedance - Z thJC (°C/W) 1 D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 Single Pulse (Thermal Resistance) Notes: 1. Duty factor D = t1/ t2 2. Peak Tj = Pdm x ZthJC + Tc 0.1 PDM t1 t2 0.01 0.001 0.00001 0.0001 0.001 0.01 0.1 1 t 1, Rectangular Pulse Duration (Seconds) 10 100 Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics www.irf.com 3 15TQ060, 15TQ060S Bulletin PD-20563 rev. A 09/01 150 Allowable Cas e T emperature - ( C) 140 130 DC 120 110 100 S quare wave (D = 0.50) 80% R ated VR applied 90 see note (2) 14 12 Average P ower L os s - (Watts ) 10 8 6 4 2 0 0 5 10 15 20 25 D D D D D = 0.20 = 0.25 = 0.33 = 0.50 = 0.75 R MS L imit DC 80 Average F orward Current - I F (AV) (A) 0 2 4 6 8 10 12 14 16 18 20 22 Average F orward Current - I F (AV) (A) Fig. 5 - Maximum Allowable Case Temperature Vs. Average Forward Current 1000 Non-R epetitive S urge Current - I F S M (A) Fig. 6 - Forward Power Loss Characteristics At Any R ated L oad Condition And With R ated V R R M Applied F ollowing S urge 100 10 100 1000 10000 S quare Wave P uls e Duration - t p (micros ec) Fig. 7 - Maximum Non-Repetitive Surge Current L H IG H-SPE ED S W ITC H FR EE-W H E EL D IO D E 40H FL40 S02 V d = 25 V olt D UT IRFP460 Rg = 25 ohm + C URRE NT M O N ITO R Fig. 8 - Unclamped Inductive Test Circuit (2) Formula used: TC = TJ - (Pd + PdREV) x RthJC ; Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6); PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1 = 80% rated VR 4 www.irf.com 15TQ060, 15TQ060S Bulletin PD-20563 rev. A 09/01 Outline Table 10.54 (0.41) MAX. 3.78 (0.15) 3.54 (0.14) 15.24 (0.60) 14.84 (0.58) 1 14.09 (0.55) 13.47 (0.53) 3 3.96 (0.16) 3.55 (0.14) 2.04 (0.080) MAX. 1.40 (0.05) 1.15 (0.04) 0.94 (0.04) 0.69 (0.03) Cathode 1.32 (0.05) DIA. 6.48 (0.25) 6.23 (0.24) 2° 1.22 (0.05) 2.92 (0.11) 2.54 (0.10) TERM 2 0.10 (0.004) Base Cathode 2.89 (0.11) 2.64 (0.10) 1 3 Anode 1 4.57 (0.18) 4.32 (0.17) 3 0.61 (0.02) MAX. 5.08 (0.20) REF. Conform to JEDEC outline TO-220AC Dimensions in millimeters and (inches) 10.16 (0.40) REF. 4.69 (0.18) 4.20 (0.16) 1.32 (0.05) 6.47 (0.25) 15.49 (0.61) 1.22 (0.05) 93° 6.18 (0.24) 14.73 (0.58) 2.61 (0.10) 2.32 (0.09) 8.89 (0.35) 5.28 (0.21) 4.78 (0.19) 0.55 (0.02) 0.46 (0.02) 3X 1.40 (0.055) REF. 0.93 (0.37) 0.69 (0.27) Base Cathode 2 1.14 (0.045) 2X MINIMUM RECOMMENDED FOOTPRINT 11.43 (0.45) 1 3 4.57 (0.18) 4.32 (0.17) 1 3 8.89 (0.35) 2 17.78 (0.70) 3.81 (0.15) 2.08 (0.08) 2X N/C Anode 0.61 (0.02) MAX. 5.08 (0.20) REF. 2.54 (0.10) 2X Conform to JEDEC outline D2Pak (SMD-220) Dimensions in millimeters and (inches) www.irf.com 5 15TQ060, 15TQ060S Bulletin PD-20563 rev. A 09/01 Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 2 33 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 09/01 6 www.irf.com