162CMQ030

PD-2.277 rev. A 12/97 162CMQ030 SCHOTTKY RECTIFIER 160 Amp Major Ratings and Characteristics Characteristics IF(AV) Rectangular waveform VRRM IFSM @ tp = 5 µs sine VF TJ @ 80 Apk, TJ = 125°C (per leg) range - 55 to 150 °C 30 7900 0.46 V A V Description/Features The 162CMQ030 isolated, center tap Schottky rectifier module has been optimized for very low forward voltage drop, with moderate leakage. The proprietary barrier technology allows for reliable operation up to 150 °C junction temperature. Typical applications are in switching power supplies, converters, free-wheeling diodes, and reverse battery protection. 150 °C TJ operation Isolated heatsink Center tap module High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance Very low forward voltage drop High frequency operation Guard ring for enhanced ruggedness and long term reliability Low profile, high current package 162CMQ030 Units 160 A CASE STYLE AND DIMENSIONS Conforms to JEDEC Outline TO - 249AA Dimensions in millimeters and inches www.irf.com 1 162CMQ030 Series PD-2.277 rev. A 12/97 Voltage Ratings Part number VR Max. DC Reverse Voltage (V) 30 VRWM Max. Working Peak Reverse Voltage (V) 162CMQ030 Absolute Maximum Ratings Parameters IF(AV) Max. Average Forward Current * See Fig. 5 IFSM EAS IAR Max. Peak One Cycle Non-Repetitive Surge Current (Per Leg) * See Fig. 7 Non-Repetitive Avalanche Energy (Per Leg) Repetitive Avalanche Current (Per Leg) 7900 980 72 16 A mJ A 5µs Sine or 3µs Rect. pulse 10ms Sine or 6ms Rect. pulse Following any rated load condition and with 162CMQ Units 160 A Conditions 50% duty cycle @ TC = 83 °C, rectangular wave form TJ = 25 °C, IAS = 16 Amps, L = 0.56 mH Current decaying linearly to zero in 1 µsec Frequency limited by TJ max. VA = 1.5 x VR typical Electrical Specifications Parameters VFM Max. Forward Voltage Drop (Per Leg) * See Fig. 1 (1) 162CMQ Units 0.53 0.65 0.46 0.63 5 280 3700 8.0 10,000 V V V V mA mA pF nH V/ µs @ 80A @ 160A @ 80A @ 160A Conditions TJ = 25 °C TJ = 125 °C VR = rated VR IRM CT LS Max. Reverse Leakage Current (Per Leg) * See Fig. 2 (1) Max. Junction Capacitance (Per Leg) Typical Series Inductance (Per Leg) TJ = 25 °C TJ = 125 °C VR = 5VDC, (test signal range 100Khz to 1Mhz) 25°C Measured from terminal hole to terminal hole dv/dt Max. Voltage Rate of Change (Rated VR) (1) Pulse Width < 300µs, Duty Cycle