16CTQ100G

Final PD-20685 rev. A 01/06 16CTQ...G SCHOTTKY RECTIFIER 16 Amp IF(AV) = 16 Amp VR = 60/100V Major Ratings and Characteristics Characteristics IF(AV) Rectangular waveform VRRM IFSM @ tp = 5 µs sine VF TJ @ 8 Apk, TJ = 125°C (per leg) range Description/ Features Units A V A V This center tap Schottky rectifier series has been optimized for low reverse leakage at high temperature. The proprietary barrier technology allows for reliable operation up to 175°C junction temperature. Typical applications are in switching power supplies, converters, free-wheeling diodes, and reverse battery protection. 175° C TJ operation Center tap configuration Low forward voltage drop High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance High frequency operation Guard ring for enhanced ruggedness and long term reliability Values 16 60/ 100 650 0.58 - 55 to 175 °C Case Styles 16CTQ...G Base Common Cathode 2 1 Anode 2 Common Cathode 3 Anode TO-220 www.irf.com 1 16CTQ...G Bulletin PD-20685 rev. A 01/06 Voltage Ratings Parameters VR Max. DC Reverse Voltage (V) VRWM Max. Working Peak Reverse Voltage (V) 16CTQ060G 60 16CTQ80G 80 16CTQ100G 100 Absolute Maximum Ratings Parameters IF(AV) Max. Average Forward Current IFSM EAS IAR * See Fig. 5 (Per Leg) (Per Device) * See Fig. 7 16CTQ Units 8 16 650 210 7.50 0.50 A mJ A A Conditions 50% duty cycle @ TC = 148°C, rectangular wave form Following any rated load condition and with 10ms Sine or 6ms Rect. pulse rated V RRM a pplied 5µs Sine or 3µs Rect. pulse TJ = 25 °C, I AS = 0.50 Amps, L = 60 mH Current decaying linearly to zero in 1 µsec Frequency limited by TJ max. VA = 1.5 x VR typical Max. Peak One Cycle Non-Repetitive Surge Current (Per Leg) Non-Repetitive Avalanche Energy (Per Leg) Repetitive Avalanche Current (Per Leg) Electrical Specifications Parameters VFM Max. Forward Voltage Drop (Per Leg) * See Fig. 1 (1) 16CTQ Units 0.72 0.88 0.58 0.69 0.28 7.0 0.415 11.07 500 8.0 10000 V V V V mA mA V mΩ Conditions @ 8A @ 16A @ 8A @ 16A TJ = 25 °C TJ = 125 °C TJ = TJ max. TJ = 25 °C TJ = 125 °C VR = rated V R IRM Max. Reverse Leakage Current (Per Leg) * See Fig. 2 (1) VF(TO) Threshold Voltage rt CT LS Forward Slope Resistance Max. Junction Capacitance (Per Leg) Typical Series Inductance (Per Leg) pF nH VR = 5VDC (test signal range 100Khz to 1Mhz) 25°C Measured lead to lead 5mm from package body (1) Pulse Width < 300µs, Duty Cycle