16YQ150C

PD - 94218A SCHOTTKY RECTIFIER HIGH EFFICIENCY SERIES 16YQ150C 16 Amp, 150V Major Ratings and Characteristics Characteristics IF(AV) VRRM IFSM @ tp = 8.3ms half-sine VF @ 16Apk, TJ =125°C Description/Features The 16YQ150C Schottky rectifier has been expressly designed to meet the rigorous requirements of hi-rel 16YQ150C Units environments. It is packaged in the hermetic isolated TO-257AA ceramic package. The device's forward voltage 16 A drop and reverse leakage current are optimized for the lowest power loss and the highest circuit efficiency for typical 150 V high frequency switching power supplies and resonent power converters. Full MIL-PRF-19500 quality 200 A conformance testing is available on source control drawings to TX, TXV and S levels. 0.87 V • • • • • Hermetically Sealed Ceramic Eyelets Low Forward Voltage Drop High Frequency Operation Guard Ring for Enhanced Ruggedness and Long term Reliability • Lightweight TJ,Tstg Operating and storage -55 to 150 °C CASE STYLE CATHODE OPEN ANODE IR Case Style TO-257AA www.irf.com 1 7/13/01 16YQ150C Voltage Ratings Part number VR Max. DC Reverse Voltage (V) VRWM Max. Working Peak Reverse Voltage (V) 16YQ150C 150 Absolute Maximum Ratings Parameters IF(AV) Max. Average Forward Current See Fig. 5 IFSM Max. Peak One Cycle Non - Repetitive Surge Current 200 A @ tp = 8.3 ms half-sine Limits 16 Units A Conditions 50% duty cycle @ TC = 124 °C, square waveform Electrical Specifications Parameters VFM Max. Forward Voltage Drop See Fig. 1Q Limits 1.10 1.36 0.97 1.26 0.87 1.22 Units V V V V V V mA mA mA pF nH @ 16A @ 32A @ 16A @ 32A @ 16A @ 32A TJ = 25°C TJ = 100°C TJ = 125°C Conditions TJ = -55°C TJ = 25°C TJ = 125°C I RM Max. Reverse Leakage Current See Fig. 2Q 0.1 3.0 16 VR = rated VR CT LS Max. Junction Capacitance Typical Series Inductance 590 9.8 VR = 5VDC ( 1MHz, 25°C ) Measured from anode lead to cathode lead 6mm ( 0.025 in.) from package Thermal-Mechanical Specifications Parameters TJ Tstg Max.Junction Temperature Range Max. Storage Temperature Range to Case wt Weight (Typical) Die Size (Typical) Case Style Q Pulse Width < 300µs, Duty Cycle < 2% 4.3 150X180 TO-257AA g mils Limits Units -55 to 150 -55 to 150 1.25 °C °C °C/W DC operation Conditions RthJC Max. Thermal Resistance, Junction See Fig. 4 2 www.irf.com 16YQ150C 100 10 125°C 100°C Reverse Current - I R ( mA ) 1 75°C 0.1 100 0.01 25°C 0.001 0.0001 0 40 80 120 160 Reverse Voltage - VR (V) Instantaneous Forward Current - I F (A) Fig. 2 - Typical Values of Reverse Current Vs. Reverse Voltage 10 1000 Tj = 25°C Tj = -55°C Junction Capacitance - CT (pF) Tj = 125°C T J = 25°C 1 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 Forward Voltage Drop - V F (V) 100 0 40 80 120 160 Fig. 1 - Max. Forward Voltage Drop Characteristics Reverse Voltage -VR (V) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage www.irf.com 3 16YQ150C 10 Thermal Response (Z thJC ) 1 D = 0.50 0.20 0.10 0.1 0.05 0.02 0.01  SINGLE PULSE (THERMAL RESPONSE) 0.0001 0.001 0.01 0.01 0.00001  Notes: 1. Duty factor D = t 1 / t 2 2. Peak TJ = P DM x Z thJC + TC 0.1 1  P DM t1 t2 t1 , Rectangular Pulse Duration (sec) Fig. 4 - Max. Thermal Impedance Z thJC Characteristics 180 Allowable Case Temprature - (°C) 160 140 120 16YQ150C R thJC = 1.25°C/W DC 100 80 60 40 20 0 0 10 20 30 Average Forward Current - I F(AV) (A) Fig. 5 - Max. Allowable Case Temperature Vs. Average Forward Current IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7903 Visit us at www.irf.com for sales contact information. Data and specifications subject to change without notice. 07/01 4 www.irf.com