20ETF

Bulletin I2111 rev. C 03/99 QUIETIR Series 20ETF..S SURFACE MOUNTABLE FAST SOFT RECOVERY RECTIFIER DIODE VF < 1.2V @ 10A IFSM = 300A VRRM 200 to 600V Description/Features The 20ETF..S soft recovery rectifier QUIETIR series has been optimized for combined short reverse recovery time and low forward voltage drop. The glass passivation ensures stable reliable operation in the most severe temperature and power cycling conditions. Typical applications are both: output rectification and freewheeling in inverters, choppers and converters and input rectifications where severe restrictions on conducted EMI should be met. Major Ratings and Characteristics Characteristics IF(AV) Sinusoidal waveform VRRM range IFSM VF trr TJ @ 10 A, TJ = 25°C @ 1A, 100A/µs range Package Outline Units A V A V ns 20ETF..S 20 200 to 600 300 1.2 60 - 40 to 150 D2 Pak (SMD-220) °C 1 20ETF..S QUIET IR Series Bulletin I2111 rev. C 03/99 Voltage Ratings Part Number VRRM , maximum peak reverse voltage V 20ETF02S 20ETF04S 20ETF06S 200 400 600 VRSM , maximum non repetitive peak reverse voltage V 300 500 700 IRRM 150°C mA 5 Absolute Maximum Ratings Parameters IF(AV) Max. Average Forward Current IFSM I2t Max. Peak One Cycle Non-Repetitive Surge Current Max. I2t for fusing 20ETF..S 20 250 Units A A Conditions @ TC = 97° C, 180° conduction half sine wave 10ms Sine pulse, rated VRRM applied 10ms Sine pulse, no voltage reapplied 300 316 442 A2 s A √s 2 10ms Sine pulse, rated VRRM applied 10ms Sine pulse, no voltage reapplied t = 0.1 to 10ms, no voltage reapplied I 2√ t Max. I √t for fusing 2 4420 Electrical Specifications Parameters VFM Max. Forward Voltage Drop 20ETF..S 1.30 1.67 Units V V mΩ V mA mA Conditions @ 20A, TJ = 25°C @ 60A, TJ = 25°C TJ = 150°C TJ = 25 °C TJ = 150 °C VR = rated VRRM rt Forward slope resistance 12.5 0.9 0.1 5.0 VF(TO) Threshold voltage IRM Max. Reverse Leakage Current Recovery Characteristics Parameters t rr Irr Qrr S Reverse Recovery Time Reverse Recovery Current Reverse Recovery Charge Snap Factor tb/ta 20ETF..S 160 10 1.25 0.6 Units ns A µC typical Conditions I F @ 20Apk @ 100A/ µs @ 25°C dir dt Ifm trr ta tb Qrr Irm (REC) t 2 www.irf.com 20ETF..S QUIETIR Series Bulletin I2111 rev. C 03/99 Thermal-Mechanical Specifications Parameters TJ Tstg Max. Junction Temperature Range Max. Storage Temperature Range 20ETF.. - 40 to 150 - 40 to 150 0.9 40 240 2 (0.07) D2Pak Units °C °C °C/W °C/W °C g (oz.) Conditions RthJC Max. Thermal Resistance Junction to Case RthJA Max. Thermal Resistance Junction to Ambient (PCB Mount)** Ts wt Soldering Temperature Approximate Weight Case Style DC operation **When mounted on 1" square (650mm2) PCB of FR-4 or G-10 material 4 oz (140µm) copper 40°C/W For recommended footprint and soldering techniques refer to application note #AN-994 150 140 130 120 110 100 90 80 70 0 2 4 6 8 10 12 14 16 18 20 22 Average Forward Current (A) 30° 60° 90° 120° 180° Conduction Angle Maximum Allowable Case Temperature (°C) Maximum Allowable Case Temperature (°C) 20ETF.. Series R thJC (DC) = 0.9 K/W 150 140 130 Conduction Period 20ETF.. Series R (DC) = 0.9 K/W thJC 120 110 100 90 80 0 5 10 15 20 25 30 Average Forward Current (A) 30° 60° 90° 120° 180° DC 35 Fig. 1 - Current Rating Characteristics Maximum Average Forward Power Loss (W) 180° 120° 90° 60° 30° RMS Limit Fig. 2 - Current Rating Characteristics Maximum Average Forward Power Loss (W) 45 40 35 30 25 20 RMS Limit 15 10 5 0 0 5 10 15 20 25 30 35 Average Forward Current (A) Conduction Period 35 30 25 20 15 Conduction Angle DC 180° 120° 90° 60° 30° 10 5 0 0 5 10 15 20 25 Average Forward Current (A) 20ETF.. Series T J = 150°C 20ETF.. Series T J = 150°C Fig. 3 - Forward Power Loss Characteristics Fig. 4 - Forward Power Loss Characteristics www.irf.com 3 20ETF..S QUIET IR Series Bulletin I2111 rev. C 03/99 Peak Half Sine Wave Forward Current (A) 300 550 500 450 400 350 300 250 200 150 100 50 0.001 20ETF.. Series 0.01 0.1 1 At Any Rated Load Condition And With Rated V RRM Applied Following Surge. Peak Half Sine Wave Forward Current (A) 250 Initial TJ = 150 °C @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s Maximum Non Repetitive Surge Current Versus Pulse Train Duration. Initial T J = 150°C No Voltage Reapplied Rated V RRMReapplied 200 150 100 20ETF.. Series 50 1 10 100 Number Of Equal Amplitude Half Cycle Current Pulses (N) Pulse Train Duration (s) Fig. 5 - Maximum Non-Repetitive Surge Current 1000 Instant aneous Forward Current (A) Fig. 6 - Maximum Non-Repetitive Surge Current 100 10 TJ = 25°C TJ = 150°C 20ETF.. Series 1 0 1 2 3 4 5 Instantaneous Forward Voltage (V) Fig. 7 - Forward Voltage Drop Characteristics Maximum Reverse Recovery Time - Trr (µs) Maximum Reverse Recovery Time - Trr (µs) 0.2 20ETF.. Series T J = 25 ° C 0.15 I FM = 30 A 0.5 20ETF.. Series T J = 150 ° C 0.4 20 A 0.3 I FM = 30 A 20 A 0.1 10 A 5A 0.2 0.05 0.1 10 A 5A 1A 1A 0 0 200 400 600 800 1000 Rate Of Fall Of Forward Current - di/dt (A/µs) 0 0 200 400 600 800 1000 Rate Of Fall Of Forward Current - di/dt (A/µs) Fig. 8 - Recovery Time Characteristics, TJ = 25°C Fig. 9 - Recovery Time Characteristics, TJ = 150°C 4 www.irf.com 20ETF..S QUIETIR Series Bulletin I2111 rev. C 03/99 Maximum Reverse Recovery Charge - Qrr (µC) Maximum Reverse Recovery Charge - Qrr (µC) 4 3.5 3 2.5 2 1.5 1 0.5 0 0 200 400 600 800 1000 Rate Of Fall Of Forward Current - di/dt (A/µs) 5A 1A 10 A 20ETF.. Series T J = 25 °C I FM = 30 A 10 9 8 7 6 5 4 3 2 1 0 0 200 400 600 800 1000 Rate Of Fall Of Forward Current - di/dt (A/ µs) 5A 1A 10 A 20 A 20ETF.. Series T J = 150 ° C I FM = 30 A 20 A Fig. 10 - Recovery Charge Characteristics, TJ = 25°C Maximum Reverse Recovery Current - Irr (A) 70 60 50 40 30 20 10 0 0 200 400 600 800 1000 Rate Of Fall Of Forward Current - di/dt (A/µs) 1A 10 A Fig. 11 - Recovery Charge Characteristics, TJ = 150°C Maximum Reverse Recovery Current - Irr (A) 100 20ETF.. Series T J = 150 °C 80 I FM = 30 A 20 A 20ETF.. Series T J = 25 °C I FM = 30 A 20 A 60 10 A 5A 5A 40 1A 20 0 0 200 400 600 800 1000 Rate Of Fall Of Forward Current - di/dt (A/ µs) Fig. 12 - Recovery Current Characteristics, TJ = 25°C (K/W) 10 Fig. 13 - Recovery Current Characteristics, TJ = 150°C thJC Steady State Value (DC Operation) 1 D = 0.50 D = 0.33 D = 0.25 D = 0.17 D = 0.08 Single Pulse 20ETF.. Series 0. 01 0.0001 Transient T hermal Impedance Z 0.1 0.001 0.01 Square Wave Pulse Duration (s) 0.1 1 Fig. 14 - Thermal Impedance ZthJC Characteristics www.irf.com 5 20ETF..S QUIET IR Series Bulletin I2111 rev. C 03/99 Ordering Information Table Device Code 20 1 1 2 3 4 5 6 7 - E 2 T 3 F 4 06 5 S 6 TRL 7 BASE + 2 (K) Current Rating Circuit Configuration: E = Single Diode T = TO-220AC F = Fast Recovery Voltage code: Code x 100 = VRRM S = D Pak (SMD-220) Version Tape and Reel Option: TRL = Left Reel TRR = Right Orientation Reel 2 1 (A) 3 (A) 02 = 200V 04 = 400V 06 = 600V - Outline Table 10.16 (0.40) REF. 4.69 (0.18) 4.20 (0.16) 1.32 (0.05) 6.47 (0.25) 15.49 (0.61) 1.22 (0.05) 93 ° 6.18 (0.24) 14.73 (0.58) 2.61 (0.10) 2.32 (0.09) 8.89 (0.35) 5.28 (0.21) 4.78 (0.19) 0.55 (0.02) 0.46 (0.02) 3X 1.40 (0.055) REF . 0.93 (0.37) 0.69 (0.27) 1.14 (0.045) 2X MINIMUM RECOMMENDED FOOTPRINT 11.43 (0.45) 1 3 4.57 (0.18) 4.32 (0.17) 2 0.61 (0.02) MAX. 5.08 (0.20) REF . 8.89 (0.35) 17.78 (0.70) 3.81 (0.15) 2.08 (0.08) 2X 2.54 (0.10) 2X Dimensions in millimeters and inches 6 www.irf.com 20ETF..S QUIETIR Series Bulletin I2111 rev. C 03/99 Marking Information EXAMPLE: THIS IS AN 20ETF06S (K) INTERNATIONAL RECTIFIER LOGO PART NUMBER 20ETF06S 9G3A ASSEMBLY LOT CODE 9512 DATE CODE (YYWW) YY = YEAR WW = WEEK (A) (A) Tape & Reel Information TRR 1.60 (0.063) 1.50 (0.059) 4.10 (0.161) 3.90 (0.153) FEED DIRECTION 1.60 (0.063) 1.50 (0.059) DIA. 0.368 (0.0145) 0.342 (0.0135) 1.85 (0.073) 1.65 (0.065) 11.60 (0.457) 11.40 (0.449) 15.42 (0.609) 15.22 (0.601) 1.75 (0.069) DIA. 1.25 (0.049) 16.10 (0.634) 15.90 (0.626) TRL 24.30 (0.957) 23.90 (0.941) 10.90 (0.429) 10.70 (0.421) 4.72 (0.186) 4.52 (0.178) FEED DIRECTION Dimensions in millimeters and inches 26.40 (1.039) 24.40 (0.961) 13.50 (0.532) 12.80 (0.504) DIA. SMD-220 Tape & Reel When orderi ng, indicate the part number, part orientation, and the quantity. Quantities are in multiples of 800 pieces per reel for both TRL and T RR. 360 (14.173) DIA. MAX. 60 (2.362) DIA. MIN. www.irf.com 7 20ETF..S QUIET IR Series Bulletin I2111 rev. C 03/99 WORLD HEADQUARTERS: EUROPEAN HEADQUARTERS: IR CANADA: IR GERMANY: IR ITALY: IR FAR EAST: IR SOUTHEAST ASIA: IR TAIWAN: 233 Kansas St., El Segundo, California 90245 U.S.A. Tel: (310) 322 3331. Fax: (310) 322 3332. Hurst Green, Oxted, Surrey RH8 9BB, U.K. Tel: ++ 44 1883 732020. Fax: ++ 44 1883 733408. 15 Lincoln Court, Brampton, Markham, Ontario L6T3Z2. Tel: (905) 453 2200. Fax: (905) 475 8801. Saalburgstrasse 157, 61350 Bad Homburg. Tel: ++ 49 6172 96590. Fax: ++ 49 6172 965933. Via Liguria 49, 10071 Borgaro, Torino. Tel: ++ 39 11 4510111. Fax: ++ 39 11 4510220. K&H Bldg., 2F, 30-4 Nishi-Ikebukuro 3-Chome, Toshima-Ku, Tokyo, Japan 171. Tel: 81 3 3983 0086. 1 Kim Seng Promenade, Great World City West Tower,13-11, Singapore 237994. Tel: ++ 65 838 4630. 16 Fl. Suite D.207, Sec. 2, Tun Haw South Road, Taipei, 10673, Taiwan. Tel: 886 2 2377 9936. http://www.irf.com Fax-On-Demand: +44 1883 733420 Data and specifications subject to change without notice. 8 www.irf.com